Kembali ke atas

【PRO TAPER】Stang EVO

Harga: IDR 3,209,819

*Termasuk PPN 10%
Webike Points: 32,098 pts

Shipping point: 17.3 pts ( 17.3 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
IDR 18,000

    • Pilih varian produk:
    • Nomor Produk:
    • 02-4004

Mohon pilih varian produk terlebih dahulu.


Spesifikasi:

[Model] Windham / RM MID

[Ukuran]
SEBUAH (lebar) : 800mm
B (tinggi) : 99mm
C (Panjangnya) : 74mm
D (Clamp Area) : 219mm
E (Menyapu) : 53mm
F (Kontrol Area) : 180mm
Lihat lebih lanjut

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Show Original

[Spesifikasi]

[Model] Windham / RM MID

[Ukuran]
SEBUAH (lebar) : 800mm
B (tinggi) : 99mm
C (Panjangnya) : 74mm
D (Clamp Area) : 219mm
E (Menyapu) : 53mm
F (Kontrol Area) : 180mm

[Deskripsi]

EVOHandlebar, yang TAPERWALL bar asli (Diproduksi oleh EASTON) Ini dikembangkan sebagai sistem evolusi dengan Basis sebagai.
Untuk Handlebar CONTOUR dengan ketebalan dinding dari 5 mm, EVOHandlebar berhasil memperoleh kekakuan dan fleksibilitas yang optimal sekaligus mempertahankan ketebalan dinding sampai 4 mm, dan di uji eksperimental itu lebih tahan lama dibandingkan dengan Handlebar lainnya Kami mendapat hasil.
Selain itu, dengan menerapkan lapisan khusus di dalam Handlebar, mencegah korosi dalam, menstabilkan karakteristik Handlebar, meluas Life, EVOHandlebar memiliki daya tahan, kekakuan perasaan, fleksibilitas (Operabilitas) , Penyerapan Shock, ringan dan kualitas tertinggi Handlebar PRO-TAPER membanggakan mengejar sebagai saldo total elemen yang dibutuhkan untuk Handlebar.

[Catatan]

* Hal ini membutuhkan stang kebesaran sesuai stang jepit karena produk ini adalah stang dengan bentuk lancip besar.
  • 4.5

    12 Ulasan

  • 5

    Sangat baik

    6

    4

    Baik

    6

    3

    Sedang

    0

    2

    Buruk

    0

    1

    Buruk

    0
  • Tulis Ulasan
  • Near the NORMALHandle position, vibration has been relieved.

    2017/08/18

    by Japan User(translated)
    I wanted a handle custom, I was at a loss for about a year.I really liked the Position of Normal handle and I had previously experienced it becoming hard to get on with Custom.However, this Handlebar was close to Normal position when Variation of pull width and height were examined a lot..I bought it to the conclusion that it might make it easier to ride instead if it uses a lot of pulling widths, perhaps without stuffing the Handlebar width.With the ease of riding as expected, Handlebar vibration at high speeds was reduced. However, it does not become Zero at all.However, the ease of Position's riding did not disappoint.I wanted to try evo of Pro taper by all means but it was worthwhile to research and investigate for a year. (Lol)I wanted to keep the Normal position as small as possible so I wrote Clamp with Y's Gear's OEM Product.
  • Near the NORMALHandle position, vibration has been relieved.

    2017/08/18

    by Japan User(translated)
    I wanted a handle custom, I was at a loss for about a year.I really liked the Position of Normal handle and I had previously experienced it becoming hard to get on with Custom.However, this Handlebar was close to Normal position when Variation of pull width and height were examined a lot..I bought it to the conclusion that it might make it easier to ride instead if it uses a lot of pulling widths, perhaps without stuffing the Handlebar width.With the ease of riding as expected, Handlebar vibration at high speeds was reduced. However, it does not become Zero at all.However, the ease of Position's riding did not disappoint.I wanted to try evo of Pro taper by all means but it was worthwhile to research and investigate for a year. (Lol)I wanted to keep the Normal position as small as possible so I wrote Clamp with Y's Gear's OEM Product.
  • Good stuff

    2015/12/22

    by Japan User(translated)
    Even at PROTAPER I tried buying the highest peak, what kind of thing is a bit expensive. 80 km by single cylinder specific vibration / The vibration which came out with about h ceased to be transmitted to the hand. Stiffness feeling, supple one is very excellent. WR is Aluminum's Frame, Thang Arm but Handlebar only Steel, I feel like completing it will be improved by replacing this.It is really nice..
  • Good stuff

    2015/12/22

    by Japan User(translated)
    Even at PROTAPER I tried buying the highest peak, what kind of thing is a bit expensive. 80 km by single cylinder specific vibration / The vibration which came out with about h ceased to be transmitted to the hand. Stiffness feeling, supple one is very excellent. WR is Aluminum's Frame, Thang Arm but Handlebar only Steel, I feel like completing it will be improved by replacing this.It is really nice..
  • Handlebar exchange (Second Repeat

    2015/10/30

    by Japan User(translated)
    When I was playing with Gymkhana playing on the river bed this time I fell down and the Handlebar was bent feeling so I thought about letting Limit use until it turns slightly but I purchased it as Stock at that time this time.I exchanged for WyndhamMODEL from OEMHandlebar last time and tried using it for several monthsFirst of all, Position is very natural and easy to ride, running at high pace and trying to protrude Lean Out's Handlebar, etc. I tried something like Uple, but it was easier to knock down as it was easier to knock down, but as I was in tune I could just slip down and Rear Slide Started and it was dangerous if we had not figured the limits firmly (thanks to it a lot I fell down ← I'm bad luckyWhen I was Willy I was up and thanks I pushed it, I pushed it up and pulled up was easy and it was good.In the case of Slide, sit in front and TanTan pack (Two-tiered dropping and half-crash) Even Counter naturally hits but it was not cramped and easy to do.Quantity by the time this turn : Pair (for Left and Right) Even if it rolls more than 10 times in total, I did not feel a sense of incompatibility when bent, so I wonder if it did well due to rigidity and supple characteristics as well ... andPerhaps it was bent gradually ... wry smileWe recommend you change from OEM to outside when turning.However, I think that it will be helpful to some extent.
12 Ulasan Lihat semua

Produk Teratas

【DAYTONA】Scrambler Handle
Scrambler Handle DAYTONA
【HURRICANE】FAT Condor Exclusive Handlebar
FAT Condor Exclusive Handlebar HURRICANE
【HURRICANE】Rebull Exclusive Handlebar
Rebull Exclusive Handlebar HURRICANE
【GOODS】Flat Track Bar 7/8-inches
Flat Track Bar 7/8-inches GOODS
【DAYTONA】40B Handlebar
40B Handlebar DAYTONA
【HURRICANE】FAT Condor Exclusive Handlebar
FAT Condor Exclusive Handlebar HURRICANE
【ENDURANCE】Handlebar CROSS Bar D
Handlebar CROSS Bar D ENDURANCE
【DAYTONA】Dirt Track Bar
Dirt Track Bar DAYTONA
【SP Takegawa: SP Takegawa】Z Handlebar (Compact)
Z Handlebar (Compact) SP Takegawa: SP Takegawa
【SP Takegawa: SP Takegawa】Aluminum Steering Handlebar Pipe
Aluminum Steering Handlebar Pipe SP Takegawa: SP Takegawa
【HURRICANE】BOLT Exclusive Handlebar
BOLT Exclusive Handlebar HURRICANE
【SP Takegawa: SP Takegawa】Aluminum Handlebar Pipe
Aluminum Handlebar Pipe SP Takegawa: SP Takegawa
【DAYTONA】Slide Bar II (Semi UP)
Slide Bar II (Semi UP) DAYTONA
【POSH】W1 Bar
W1 Bar POSH
【HURRICANE】Conti 2 Type Handlebar Kit
Conti 2 Type Handlebar Kit HURRICANE
【EASYRIDERS】Short Rise Bar with Dimple
Short Rise Bar with Dimple EASYRIDERS
【BEET】Tapper Handlebar
Tapper Handlebar BEET