- Beranda
- Motor
- HONDA 51 - 125cc
- PCX125
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Long Wheelbase Kit
- ADIO
- ADIO: Damper Bracket for 150mm Long Wheel Base Kit (Thailand Spec)
Damper Bracket for 150mm Long Wheel Base Kit (Thailand Spec)
- Nomor produk: BK31102
-
- ADIO
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Ini adalah braket peredam (adaptor kemunduran) untuk digunakan saat memasang kit Ronghui 150 mm Thailand ke model PCX125 sebelumnya ..
Kit Longhui 150 mm Thailand hanya tersedia sebagai kit gantungan mesin, jadi jika Anda memasangnya sebagaimana adanya, ketinggian kendaraan akan sangat rendah dan ada risiko mesin tidak dapat berfungsi karena kemiringan yang besar pada kepala mesin.. Braket yang memecahkan masalah tersebut ..
Ini adalah braket untuk peredam belakang ..
Dengan menggabungkan braket ini dengan kit Longhuys 150 mm Thailand, tinggi pengendaraan dan kemiringan kepala mesin akan sama dengan stok.. Tentu saja, Anda juga dapat menggunakannya dengan guncangan eksternal turun bawah.. Saat Anda menurunkan mobil, kepala mesin akan diturunkan juga ..
This is the damper bracket (setback adapter) to be used when installing the Thailand-made 150mm Long Hoy kit on the early model PCX125.
The 150mm long wheel kit made in Thailand is only for the engine hanger, so if you install it as it is, the height of the vehicle will be extremely low and there is a risk of engine seizure due to the large inclination of the engine head.This is the bracket that solves those problems.
■It is a bracket that is installed on the upper side of the rear damper and shifts the position of the damper to the rear.
By combining this bracket with Thailand 150mm Long Wheel kit, the ride height and engine head tilt will be the same as stock.Of course, it can be combined with aftermarketlowering shocks.If the engine is lowered, the engine head will also be lowered.
Peringatan
• Peringatan Pemasangan
Braket dapat dipasang tanpa pemrosesan.
Kendaraan sisi belakang berukuran sekitar 85 mm atau lebih saat memasang kendaraan ini.
Ini membutuhkan pemotongan kotak penutup mata agar peredam belakang bergeser setelahnya.
Ada juga semak sisi atas yang sempit saat memasang peredam barang eksternal. Dalam hal ini, penyetelan jarak harus dilakukan dengan mesin cuci.
Peredam belakang dan pembersih udara akan mengganggu jika Anda menggunakan pembersih udara OEM. Silakan proses posisi pemasangan pembersih udara OEM atau ganti dengan pembersih udara merek lain.
Coupler di bagian atas throttle mengganggu dan proyeksi di permukaan bawah kotak jok karena amplitudo bagian atas dan bawah mesin sangat besar saat akselerator hidup dan mati.. Anda perlu memotong bagian bawah kotak kursi.
■Precautions for installation
*The bracket itself can be installed without any modification.
*Installing this product will raise the rear ride height by approx. 85mm.
*Because the rear damper is shifted to the rear, it is necessary to cut the blinker case.
*If installing an aftermarket damper, some bushings on the upper side are narrower than others.In this case, it is necessary to adjust the clearance with washers.
*When using the stock air cleaner, the rear damper will interfere with the air cleaner.Please replace the air cleaner with an aftermarket air cleaner or modify the installation position of the stock air cleaner.
*The up and down amplitude of the engine when the accelerator is turned on and off is so large that the protrusion on the bottom of the seat box contacts the coupler on the top of the throttle.Cut processing of the bottom of the seat box is required.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/