- Beranda
- Perkakas
- Peralatan Listrik
- PROXXON
- PROXXON: Milling Table FF2230
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Spesifikasi Produk / Keseluruhan Tubuh]
Sumber Daya listrik : 100V 50 / 60Hz
konsumsi daya : 80W
Jumlah rotasi : Belt6-tahap Kecepatan
280/550/870 / 1.250 / 1.700 / 2.500 menit-1(waktu / menit)
Ukuran Rangka Udara: / Lebar 350mmxDepth300mmxHeight 490mm
Diameter Chuck Collet : Φ6 / 8 / 10mm
Berat : 17kg
Peringkat Waktu Operasi : 30 menit
[Bagian Meja Silang]
Ukuran tabel : 270mmx80mm (dengan T-grooved)
Tangani Skala : 10 / 100mm (Stang 1 Rotasi / 2.0mm)
Jumlah Slide : Depan belakang (Poros Y) : 60mm
Kiri kanan (Poros X) : 170mm
[Bagian Berdiri]
Tinggi : 400mm
Jumlah Slide Atas / Bawah : 30mm
Tinggi (dari Permukaan Tabel) : Maksimum 200mm
Kecenderungan : Arah Kiri Kanan 90 derajat
[Daftar Bagian yang Disertakan]
Gerakan Halus Makan Tinggi (Dipasang di tubuh)
No.24256 / Mini Tinggi Penjepit Bebas
Collet Chuck (untuk Φ6 / 8 / 10mm)
Kunci Pas Eksklusif
Berbagai macam kunci pas tipe L
Kunci Pengontrol Debu
[Bagian Tip yang Sesuai]
No.27613 End Mill
No.27614 End Mill
No.27616 End Mill [Product Specifications / Overall]
Power Supply: 100V 50/60Hz
Power consumption: 80W
RPM: Belt 6-stage speed change
280 / 550 / 870 / 1.250 / 1.700 / 2.500min-1 (times / min)
Fuselage dimensions: Width 350mm X Depth 300mm X Height 490mm
Collet chuck diameter: Φ6/8/10mm
Weight: 17kg
Rated operating time: 30 minutes
[Cross table section]
Table dimensions: 270mm x 80mm (with T-slot)
Handle scale: 10 / 100mm (1 turn of handle / 2.0mm)
Slide amount: Front / Rear (Y-axis): 60mm
Left / Right (X-axis): 170mm
[stand section]
Height: 400mm
Vertical slide amount: 30mm
Height from table surface: Max. 200mm
Slope: 90 degrees in both directions
[Accessories list]
・Height fine-movement feed (already installed in the main unit)
・No.24256 / mini height free clamp
・Collet chuck (for Φ6 / 8 / 10mm)
・Dedicated spanner
・L-shaped Wrenches
・Dustproof glasses
[Compatible tip parts]
・No.27613 End mill
・No.27614 End mill
・No.27616 End mill
Sumber Daya listrik : 100V 50 / 60Hz
konsumsi daya : 80W
Jumlah rotasi : Belt6-tahap Kecepatan
280/550/870 / 1.250 / 1.700 / 2.500 menit-1(waktu / menit)
Ukuran Rangka Udara: / Lebar 350mmxDepth300mmxHeight 490mm
Diameter Chuck Collet : Φ6 / 8 / 10mm
Berat : 17kg
Peringkat Waktu Operasi : 30 menit
[Bagian Meja Silang]
Ukuran tabel : 270mmx80mm (dengan T-grooved)
Tangani Skala : 10 / 100mm (Stang 1 Rotasi / 2.0mm)
Jumlah Slide : Depan belakang (Poros Y) : 60mm
Kiri kanan (Poros X) : 170mm
[Bagian Berdiri]
Tinggi : 400mm
Jumlah Slide Atas / Bawah : 30mm
Tinggi (dari Permukaan Tabel) : Maksimum 200mm
Kecenderungan : Arah Kiri Kanan 90 derajat
[Daftar Bagian yang Disertakan]
Gerakan Halus Makan Tinggi (Dipasang di tubuh)
No.24256 / Mini Tinggi Penjepit Bebas
Collet Chuck (untuk Φ6 / 8 / 10mm)
Kunci Pas Eksklusif
Berbagai macam kunci pas tipe L
Kunci Pengontrol Debu
[Bagian Tip yang Sesuai]
No.27613 End Mill
No.27614 End Mill
No.27616 End Mill [Product Specifications / Overall]
Power Supply: 100V 50/60Hz
Power consumption: 80W
RPM: Belt 6-stage speed change
280 / 550 / 870 / 1.250 / 1.700 / 2.500min-1 (times / min)
Fuselage dimensions: Width 350mm X Depth 300mm X Height 490mm
Collet chuck diameter: Φ6/8/10mm
Weight: 17kg
Rated operating time: 30 minutes
[Cross table section]
Table dimensions: 270mm x 80mm (with T-slot)
Handle scale: 10 / 100mm (1 turn of handle / 2.0mm)
Slide amount: Front / Rear (Y-axis): 60mm
Left / Right (X-axis): 170mm
[stand section]
Height: 400mm
Vertical slide amount: 30mm
Height from table surface: Max. 200mm
Slope: 90 degrees in both directions
[Accessories list]
・Height fine-movement feed (already installed in the main unit)
・No.24256 / mini height free clamp
・Collet chuck (for Φ6 / 8 / 10mm)
・Dedicated spanner
・L-shaped Wrenches
・Dustproof glasses
[Compatible tip parts]
・No.27613 End mill
・No.27614 End mill
・No.27616 End mill
[Deskripsi]
[Product Summary]
Milling tables designed primarily for metalworking.
It can also be used as a drilling machine and the milling part can be removed from the cross table and mounted on No.24004 Microlase PD230.
Usage: Processing of wood and metal.
Milling tables designed primarily for metalworking.
It can also be used as a drilling machine and the milling part can be removed from the cross table and mounted on No.24004 Microlase PD230.
Usage: Processing of wood and metal.
Peringatan
* Ada kasus di mana produk sebenarnya mungkin berbeda.
* Bagian ujung, alat, bahan, dan benda kerja pada foto hanya untuk referensi.
* Pabrik akhir (Pedang) Tidak termasuk. *The actual product may vary.
*Tip bits, tools, materials and workpieces in the images are for illustrative purposes only.
*End mills (blades) are not included.
* Bagian ujung, alat, bahan, dan benda kerja pada foto hanya untuk referensi.
* Pabrik akhir (Pedang) Tidak termasuk. *The actual product may vary.
*Tip bits, tools, materials and workpieces in the images are for illustrative purposes only.
*End mills (blades) are not included.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/