Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Isi Produk: Bahan Fender Depan : FRP Jenis Fender Depan : Racing Communal hingga 17-inci / 18-inci Bahan Stabilizer : A2017S Sela Keluar Fork Span : Komunal hingga 205mm / 210mm
Termasuk Bagian: Fender Depan (FRP) x 1 pc. Penjepit Bawah Fender x 1 pc. Sekrup x 4 buah. Penstabil Garpu x 1 pc. (Ini mengadopsi Metode Rilis Cepat.)
[Components] Front fender type: For 17 inch Stabilizer material: A2017S machined Fork span: For both 205mm and 210mm
[Components] ■Full assembly KIT with lower brace and screws ・Front Fender x 1 ・Fender lower brace x 1 ・Screw x 4 ・Fork stabilizer x 1 (Quick release system)
[Deskripsi]
Fender depan dan stabilizer dapat dibaut ke garpu depan tegak OHLINS φ43 untuk XJR1300 atau ZRX1100 / 1200.. Rilis cepat penjepit yang dapat ditarik. A2017S Sela Keluar. Jarak bebas ban dan fender dapat disesuaikan dengan mengatur posisi penjepit ke atas atau ke bawah sesuai keinginan.. Dua jenis bentang garpu, 205 dan 210mm, tersedia. Garpu tegak OHLINS φ43 dapat digunakan pada mobil kustom seperti seri Z, Ninja, dan Katana ..
210mm KAWASAKI: ZEPHYR1100 YAMAHA: XJR1200 / 1300 LAINNYA: Kendaraan dilengkapi dengan batang untuk SCULPTURE-Z
The NITRO RACING ceiling mounted front fender to be bolted on to the stock GSX-R or GSF1200 forks. This front fender can also be used with the NITRO RACING stabilizer to fit a variety of machines. The stabilizer is available in three different anodized aluminum colors to match the color of your machine, for a total of nine different combinations. There are two types of front fender shapes: naked and racing.
□A2017S Machined from geralumin. □The brake pedal stroke is properly secured for better control of the rear brake. □The stainless steel return spring helps to improve the response of braking input feeling and prevent dragging when braking repeatedly. □M8 pillow ball is used for the rear master push rod to prevent the bolt from breaking. □The new change rod is made from A2011 hexagonal material and is machined to high strength and high durability specifications. □The pedal shaft is equipped with a bearing system for smooth and reliable operation. □The rear brake switch is a reliable mechanical type designed for each model of vehicle (sold separately). □The NITRO RACING rearset series is designed to be used in the event of a fall, and all the repair parts, including the step bar and even the bolts, can be purchased separately.
NITRO RACING offset sway bar to match the new Ohlins upright fork. By installing a ceiling-suspension front fender, it became possible to install a non-stock front fender on Ohlins upright forks.
The stabilizer is available in three different anodized aluminum colors, for a total of nine different combinations, allowing for more individual customization to meet the needs of a wide variety of machines. Two types of fenders are available, naked and racing. It will create an attractive Ohlins world.
Adjustable to accommodate fork spans from 205mm to 210mm. It can be used for Z series, NINJA, KATANA and other custom vehicles which use Ohlins Φ43 upright fork. You can adjust the clearance between the tire and fender by changing the offset brace and clamp position up or down as desired.
[Forkspan Reference Typical model DATA] ■205mm KAWASAKI: ZRX1100 / 1200 ZZ-R1100C / D SUZUKI: 89' GSX-R750 / 1100
■210mm KAWASAKI: ZEPHYR1100 YAMAHA: XJR1200 / 1300 Other: Vehicles with stem for SCULPTURE-Z
Peringatan
* Produk ini untuk OHLINS Φ43 Upright Front Fork. Tidak dapat dipasang pada garpu tegak dari pabrikan lain.
*Images may contain other types and colors. Adjustable to accommodate fork spans from 205mm to 210mm. *This product is designed for use with Ohlins Φ43 upright front forks.It cannot be used with upright forks of other manufacturers. *This product is also compatible with the old type Ohlins Φ43 upright front forks / NITRON forks. *Please make sure to check the fork span of the vehicle before purchasing. *There may be changes in product specifications due to the manufacturer's reasons.
