- Beranda
- Sparepart Motor
- Kelistrikan
- Lampu
- Lampu Kabut
- PROTEC
- PROTEC: FLH-533 Lampu Kabut LED dengan Pelindung
FLH-533 Lampu Kabut LED dengan Pelindung
- Nomor produk: 65533-D
-
- IN STOCK
- Out Stock
- PROTEC
- |
- 0.0
- (0 ulasan)
Jumlah
Model yang Sesuai
Lihat SemuaRincian Produk
Spesifikasi:
Mounting Bolt Size : M6 x 30mm
Berat : 540G
Tegangan Terukur : DC12V
Daya Input: 28W
Temperatur warna : 6000K Outline size: W70mm x H70mm x D135mm *Excluding protruding parts
Mounting bolt size: M6 x 30mm
Weight: 540g
Rated Voltage: DC12V
Input power: 28W
Color Temperature: 6000K
[Deskripsi]
Lebih cerah dari HID dan bahkan lebih hemat daya
Daya input 28W dan suhu warna 6000K. Sebagai indikasi kecerahan, ini lebih terang dari HID 35W 6000K.
Seri FLH-533 dan seri FLH-535 dilengkapi dengan pelat pelindung di dalam lensa untuk mencegah silau ..
* Semua seri memiliki kecerahan yang sama ..
Lampu tiba-tiba terang dan cepat!
Tidak seperti HID, ini menyala dengan daya penuh segera setelah menyalakan daya.. Dan tidak seperti HID, tidak ada perubahan bertahap pada warna emisi ..
Sistem reduksi cahaya otomatis yang ramah baterai!
Dilengkapi dengan sensor dimmer (sistem kontrol cahaya otomatis) dan sensor REV (sensor putaran mesin RSE-01). Bereaksi terhadap cahaya sekitar di siang hari untuk secara otomatis mengurangi jumlah cahaya yang dipancarkan, berfungsi sebagai siang hari di siang hari dan menyalakan daya 28W penuh di malam hari.. (Perbedaan dari kondisi cahaya yang diperkecil adalah lima kali. ) Selain itu, dengan menghubungkan sensor REV (RSE-01) , ini mengurangi pembangkitan panas LED dan beban ke baterai dengan meredupkan cahaya saat idle.
Pendinginan udara paksa dengan angin yang mengalir
Dirancang untuk mendinginkan panas yang dihasilkan oleh LED dengan mengarahkan angin yang bergerak ke seluruh unit. Saat mobil tidak bergerak, sensor putaran mesin mengurangi intensitas cahaya 1/5, sehingga hampir tidak ada panas yang dihasilkan.. Produk ini dirancang untuk mendinginkan panas yang dihasilkan oleh LED dengan menerapkan angin yang mengalir ke seluruh unit.. Sebagai contoh, pada kecepatan 36 km / jam, angin dengan kecepatan 10 mph mendinginkannya dan menghasilkan sedikit panas saat mengemudi.. Saat mobil tidak bergerak, sensor REV (sensor putaran mesin) mengurangi intensitas cahaya 1/5, sehingga hampir tidak ada panas yang dihasilkan ..
Desain anti-silau!
Seri FLH-533 dan seri FLH-535 dilengkapi dengan pelat pelindung di dalam lensa untuk mencegah silau ..
Handset tambahan dapat ditambahkan!
Dengan menghubungkan handset nirkabel opsional (tanpa sensor REV) , Anda dapat memasangnya di kedua sisi kendaraan ..
Tubuh die-cast berkualitas tinggi
Citra tubuh (66535-D) Tubuhnya terbuat dari die-cast bermutu tinggi.
Pasang baut dengan 4 arah berbeda untuk dipilih
Empat orientasi baut pemasangan yang berbeda tersedia untuk memenuhi berbagai situasi pemasangan setiap kendaraan.
Brightness beyond HID and even more power-saving
The input power is 28W and the color temperature is 6000K.As a rough guide of the brightness, it is equal or more than the brightness compared with 35W 6000K HID.
FLH-533 series and FLH-535 series are equipped with a light-shielding plate inside the lens to prevent glare.
*The brightness is the same for all series.
Suddenly bright and quick lighting!
Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.
Adopts a battery-friendly automatic light reduction system!
Equipped with dimmer sensor (automatic light control system) and REV sensor (engine rotation sensor RSE-01).It automatically reduces the amount of light emitted by the LED in response to the ambient brightness during the day, so it functions as a daylight during the day and lights up at night with 28W full power.(The difference from the attenuated state is 5 times.In addition, by connecting the REV sensor (engine revolution sensor RSE-01), the light will be dimmed even when idling at a standstill, reducing the heat generated by the LED and the burden on the battery.
Forced air cooling by running wind type
Designed to cool the heat generated by the LED by exposing the entire unit to running air.When the vehicle is stopped, the light is reduced by 1/5 due to the REV sensor (engine rotation sensor), so it hardly generates heat.This product is designed to forcibly cool down the heat generated by the LED by exposing the entire unit to the running wind.For example, at a speed of 36 km/h, a 10 mph wind cools the car, so it generates almost no heat while riding.When the vehicle is stopped, the light is reduced by 1/5 due to the REV sensor (engine rotation sensor), so it hardly generates heat.
Designed to prevent running glare!
FLH-533 series and FLH-535 series are equipped with a light-shielding plate inside the lens to prevent glare.
More running units can be added!
By connecting the optional child unit (without REV sensor), the unit can be installed on both sides of the vehicle.
Die-cast body with high running quality
Image of the product (66535-D): the main unit is made of high quality die-cast.
Four types of directional mounting bolts with a choice of rides
This product has four types of mounting bolt directional variations to accommodate various installation situations for each vehicle, where the direction of the dimmer sensor and wiring is specified.
Catatan
Klik di sini untuk lampu mengemudi LED
LED driving light is here.
Peringatan
PERINGATAN
* Produk ini untuk DC 12V. Harap patuhi secara ketat aturan tentang kabel dengan menggunakan catu daya DC 12V.
* Jangan menghubungkan kabel lampu depan kendaraan alternator yang biasa ditemukan di antara kendaraan berkapasitas kecil. Jika menggunakan catu daya AC, diperlukan adaptor konverter AC / DC yang dijual terpisah.
* Karena sesuai dengan spek. untuk meredupkan cahaya untuk tujuan menekan panas pada saat berhenti, pastikan untuk menggunakan dengan menghubungkan ke unit RSE-01 yang disertakan.
* Saat memasang produk ini, orientasi untuk memasang dibatasi : Sensor peredup mengarah ke atas. Kabelnya mengarah ke bawah.
* Harap dicatat bahwa kami tidak bertanggung jawab apa pun atas kerusakan seperti kegagalan atau kecelakaan akibat penggunaan produk ini. Warning
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Please be careful when handling this product.Improper handling may cause burns or other serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*This product is a precision instrument, so do not drop it or pull the wiring forcibly.There is a risk of malfunction, injury or burn due to electric shock, or serious accidents involving human life.
*Do not disassemble or modify this product in any way.Failure to do so may result in a vehicle fire or accident.The warranty does not apply to products that have been disassembled or modified.
*If any damage is found to the product before or during installation, immediately stop the installation work.
Caution
*This product is for 12v DC only.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the headlight wiring of AC-powered vehicles, which is common in small displacement vehicles.When using an AC power supply, an AC-DC conversion adapter (sold separately) is required.
*Depending on the power generation capacity of the vehicle's generator, there is a risk of battery failure.Please charge the battery regularly.Also, by taking measures such as lowering the power consumption of the headlight bulb, you can reduce the overall power consumption and avoid problems.
*These products generate heat due to their characteristics.When installing, be sure to install it so that it is exposed to the wind when riding.Also, after installing this product, periodically retighten it to make sure that it is securely installed.
*Please be sure to connect the attached RSE-01 unit before use, as the light is dimmed to reduce heat generation when the vehicle is stopped.
*This product is designed to be installed in a specific direction.Be sure to install the unit so that the dimmer sensor is facing up and the wiring is facing down.
*If you feel any abnormality while using this product, please contact the dealer where you purchased it or Protec Service Section.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*The plating may peel off if it is left for a long time with moisture on the plated part while the body is hot.Be sure to wipe off any moisture that may have adhered to the product before use.
*Please do not drop, scratch, or apply excessive force to the LED light body.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Do not light near flammable or inflammable materials such as paper, cloth, gasoline, flammable spray, thinner, etc.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*Neo Factory will not be held responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
Precautions for installation
*Install it below the center of the headlight.
*The illumination must be below the optical axis of the headlight.
*Do not turn on more than 3 fog lights at the same time.
*Install a switch that can be turned on and off independently.
*The mounting position must be between 25cm and 80cm from the ground.