M Nozzle

  • Nomor produk: MN-NEW
    • IN STOCK
    • Out Stock

Rp917,000

*Termasuk PPN 11%

Webike Points: +9,170 Points

Alamat Pengiriman

  • Mohon tunggu...
to DKI Jakarta, Jakarta Selatan, Cilandak
UBAH
Pilih Alamat
Biaya pengiriman Rp10,000
Cek kupon saya

Jumlah

100% Ori Garansi 7 hr Gratis Cashback Nett Tanpa Biaya Tambahan

Model yang Sesuai

Lihat Semua
CR-SPECIALCarburetor KEIHIN

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

Spesifikasi:

Kuantitas : 1 pc.
Bahan : Finishing Anodized Duralumin A2011

[Deskripsi]

Dengan memodifikasi bentuk nosel utama, yang seharusnya disebut area terlarang dalam penyetelan karburator, kami telah berhasil secara dramatis meningkatkan karakteristik dan respons atomisasi ..
Pemasangannya semudah mengganti jet.

Ini bukan lagi perasaan akselerasi karburator CR ..
Kami telah mengonfirmasi bahwa torsi dan tenaga telah ditingkatkan dalam uji bangku.. Dan di semua revolusi ...

"M Nozzle", yang secara dramatis dapat meningkatkan performa karburator CR, telah mengalami perubahan model untuk mencapai performa yang lebih baik.






Catatan

* Preset untuk pemasangan nosel M.

Pasang nosel M dan prasetel sebagai berikut.
Penting untuk mengatur jet sedemikian rupa sehingga terhubung, dan oleh karena itu, jika Anda tidak memiliki jet, Anda tidak akan mendapatkan hasil yang baik jika Anda tidak memiliki jet, atau jika Anda tidak memilikinya. lakukan pekerjaan yang baik dengan hanya menyiapkan beberapa jet di bawah ini ..

Jika Anda memiliki pertanyaan, silakan hubungi pabrikan, Pabrik Mameshiba.
(Pabrik Mamejirou Co. E5E5E590-3342-1234 Email.:mameshiba198@gmail. com)

・ CR35-39: 4 set (Ukuran potongan katup throttle 3.0)
MJ: 130-140
JN: 5178-5179
Posisi klip: Standard Position4-Stage dari Top Stage
SJ: 58-60
AS: Satu putaran kembali.

・ CR35-39: Single (ukuran cutaway katup throttle adalah 3.0)
MJ: 130-140
JN: 5173-5175
Posisi klip: Standard Position4-Stage dari Top Stage
SJ: 40-45 (dengan outlet percontohan)
AS: Satu putaran kembali.

CR33 (ukuran cutaway katup throttle adalah 3.0)
MJ: 120-125
JN: YY6-YY7
Posisi klip: Baris ke-6 dari atas - baris ke-5
SJ: 58-60 * 50-52 jika ada outlet pilot
AS: Satu putaran kembali.

CR31 (ukuran cutaway katup throttle adalah 3.0)
MJ: 118-122
JN: YY6-YY7
Posisi klip: Baris ke-6 dari atas - baris ke-5
SJ: 58-60 * 50-52 jika ada outlet pilot
AS: Satu putaran kembali.

CR31 (Ukuran cutaway katup throttle adalah 2,5)
MJ: 115-120
JN: YY6-YY7
Posisi klip: Baris ke-6 dari atas - baris ke-5
SJ: 55-58 * 48-50 dengan outlet percontohan
AS: Satu putaran kembali.

CR29 (Ukuran cutaway katup throttle adalah 2,5)
MJ: 115-120
JN: YY6-YY7
Posisi klip: Baris ke-6 dari atas - baris ke-5
SJ: 55-58 * 48-50 dengan outlet percontohan
AS: Tiga perempat putaran mundur - 1 putaran

CR26 (Ukuran cutaway katup throttle adalah 2.0)
MJ: 100
JN: YY7-YY8
Posisi klip: Baris ke-6 dari atas - baris ke-5
SJ: 42-45 * 38-42 dengan outlet percontohan
AS: 1 / 2-3 / 4 kembali


* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.

Peringatan

*This product requires tuning when installed on a bike.We recommend that you have it installed by a specialized motorcycle store.
*We are not responsible for any malfunctions caused by incorrect installation method or mis-tuning, except for the initial defects of the product.
*Designated presets when *M nozzles are installed
Please preset as follows with the M nozzle.
Since the connection of each jet is important in the setting, half-hearted work such as reflecting only a part of the following because you do not have your own jet will not give you good results.

・CR35-39: Quadruple (Throttle valve cutaway size is 3.0)
MJ:130-140
JN: 5178-5179
Clip position: Fourth from the top
SJ: 58-60
AS: 1 rotation back

・CR35-39: Single (Throttle valve cutaway size is 3.0)
MJ:130-140
JN: 5173-5175
Clip position: Fourth from the top
SJ: 40-45 (Specification with pilot outlet)
AS: 1 rotation back

・CR33 (Throttle valve cutaway size is 3.0)
MJ:120-125
JN: YY6-YY7
Clip position: Sixth row from the top - Fifth row
SJ: 58-60 *50-52 with pilot outlet
AS: 1 rotation back

・CR31 (Throttle valve cutaway size is 3.0)
MJ:118-122
JN: YY6-YY7
Clip position: Sixth row from the top - Fifth row
SJ: 58-60 *50-52 with pilot outlet
AS: 1 rotation back

・CR31 (Throttle valve cutaway size is 2.5)
MJ:115-120
JN: YY6-YY7
Clip position: Sixth row from the top - Fifth row
SJ: 55-58 *48-50 with pilot outlet
AS: 1 rotation back

・CR29 (Throttle valve cutaway size is 2.5)
MJ:115-120
JN: YY6-YY7
Clip position: Sixth row from the top - Fifth row
SJ: 55-58 *48-50 with pilot outlet
AS: 3/4 turn back -1 turn

・CR26 (Throttle valve cutaway size is 2.0)
MJ:100
JN: YY7-YY8
Clip position: Sixth row from the top - Fifth row
SJ: 42-45 *38-42 with pilot outlet
AS: 1/2-3/4 turn back

*There may be changes in product specifications due to the manufacturer's reasons.

Model yang Sesuai

CR-SPECIALCarburetor KEIHIN

PRODUK YANG JUGA DILIHAT

Produk Siap Dikirim dari Gudang Jepang

Rekomendasi buat Kamu

Best Seller

Produk Teratas

See all

New Custom Article

Lihat semua