- Beranda
- Motor
- YAMAHA 126 - 250cc
- TW225E
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Depan
- GOODS
- GOODS: Spakbor Depan & Stabilizer Suspensi
Spakbor Depan & Stabilizer Suspensi
- Nomor produk: G6-00125
-
- IN STOCK
- Out Stock
- GOODS
- |
- 3.6
- (5 ulasan)
Jumlah
Model yang Sesuai
Lihat SemuaRincian Produk
Spesifikasi:
Spatbor : FRP
Mengurung : Baja
[Ukuran]
Stabilizer Lebar Kiri dan Kanan : Sekitar 188mm
Tinggi : Sekitar 138mm
Lebar Depan dan Belakang : Sekitar 165mm
Diameter pipa : Φ15.9mm
Lebar fender : Sekitar 104mm
Panjang Lingkar Fender : Sekitar 410mm
[Daftar Produk]
Fender x1pc.
Braket x 1 Jenis
Stabilizer Pekerjaan Pipa x1pc. size
Stabilizer Left / Right Width: 188 approx. mm Height: Approx. 138mm, front/rear width: Approx. 165mm Pipe diameter: Φ15.9mm Fender widthApprox. 104mm Fender circumference length: Approx. 410mm
materials
Fender: FRP Bracket: Steel
Components
Fender x 1 Bracket x 1 set Pipework stabilizer x 1
[Deskripsi]
Jangan merusak gaya! BARANG OEM Fender Depan
Ini adalah spatbor depan dengan baut. Posisi pemasangan bisa naik dan turun, dan bahkan mungkin untuk memasang ban tinggi seperti batu api. Ada juga front stiffness Up effect oleh braket yang juga berfungsi sebagai stabilizer.
Itu sesuai seperti FIRESTONE!
Sulit untuk memasang fender saat memasang ban dengan ketinggian tinggi tetapi Fender pekerjaan pipa BAIK dapat dipasang tanpa masalah. Itu pas dengan spatbor yang sudah dilepas sampai sekarang. Ini solusinya.
Ini adalah desain yang tidak mengganggu gaya!
Ini dirancang agar sesederhana mungkin dengan bodi kendaraan sehingga dapat dipasang pada chopper, dan gaya bobber tanpa menimbulkan ketidaknyamanan.. Ini berpadu sempurna dengan gaya apa pun karena Anda dapat melihat setiap foto kendaraan yang terpasang.
Ini berfungsi ganda sebagai stabilizer, kekakuan depan!
Ini adalah salah satu stall di kekakuan depan hilang di eliminator fender dengan item ini! Itu mencapai "berkendara penuh disesuaikan".
Bolt-on front fenders. The mounting position can be raised or lowered, and tires with high height such as Firestone can be mounted.It also has the effect of increasing the rigidity of the front by the bracket that also serves as a stabilizer.
Compatible with FIRESTONE and more!
Until now, it was difficult to install fenders with high height tires, but our pipework fenders can be installed without any problem!Mounting the fender that could't be installed on up until now.This is the solution!
Designed not to interfere with your style!
It is designed to be as simple as possible and to blend in with the body of the vehicle so that it can be installed on choppers and bobber styles without any discomfort.As you can see from the installation images, it fits perfectly to any style.
It is also a stabilizer to improve the front rigidity!
This product will solve the problem of the front rigidity lost by the fender eliminator!GOODS is trying to make "full customization for riding" happen!
Peringatan
* Jika jenis dan ukuran ban terlalu besar, ada kemungkinan tidak bisa dipasang.
[Berkenaan dengan Black gel Coat / FRP]
* Meskipun FRP aslinya berwarna hitam, ini tidak dicat hitam, tetapi tidak "cukup hitam". Dimungkinkan untuk digunakan apa adanya, Ini akan berubah warna karena penuaan, memudar akan keluar jadi kami sarankan Anda untuk melukis.
* Hal tersebut menyebabkan goresan gesekan yang tidak dapat dihindari, seperti saat mencabut produk FRP pada proses pembuatan. Selain itu, ini juga berada dalam "kisaran produk FRP yang dapat diterima" untuk beberapa pemudaran warna. Harap memahaminya sebagai dasar melukis sampai akhir.
* Produk FRP, Dapat menyebabkan gejala seperti retak dengan menggunakan paksa. *The stabilizer has a front and rear orientation.The taller side should be on the front.
*FIRESTONE tires are confirmed to be available in 4.00 size.
*If the tire type or size is too large, it may not be able to be mounted.
About FRP and black gel coat
*FRP is originally black, but this is not painted black and not beautiful black.It can be use as it is, but it is recommended to paint it because of the discoloration and fading over time.
*Scratches and scratches are unavoidable in FRP products during the die-cutting process.Also, some color fading is to be within the acceptable range of FRP products.Please understand that it is only a base for painting.
*FRP products may crack if excessive force is applied to them.
*There may be changes in product specifications due to the manufacturer's reasons.