- Beranda
- Motor
- HONDA 0 - 50cc
- GYRO CANOPY
- Sparepart Motor
- Sparepart Mesin
- Sparepart Pengapian
- CDI
- DILTS JAPAN
- DILTS JAPAN: SPEED ENHANCER
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
gyro X TD02-11-
gyro canopy TA03-11-
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Mudah dipasang ke Coupler ON.
Berat : 0.1KG
●Easy installation with coupler ON
●Weight: 0.1kg
Berat : 0.1KG
●Easy installation with coupler ON
●Weight: 0.1kg
[Deskripsi]
Ini adalah batas pembatas kecepatan untuk melepaskan pembatas sensor kecepatan yang dipasang pada giroskop model akhir guna meningkatkan kecepatan maksimum ..
Sistem giro baru memiliki sensor kecepatan khusus yang dipasang di mesin, dan ECU mengontrol pembatas saat kecepatan tertinggi mencapai 55 km / jam.. (Melepaskan sensor kecepatan akan menyebabkan ECU error dan melambat.)
Ini adalah sensor kecepatan yang tidak bergantung pada speedometer, sehingga mengaktifkan pembatas kecepatan saat kecepatan 55 km / jam, terlepas dari tampilan kecepatan pada meteran atau putaran mesin ..
Oleh karena itu, meskipun katrol kecepatan tinggi dipasang, kecepatan maksimum dikontrol pada 55 km / jam.. Produk ini mengatasi masalah ini hanya dengan melepas penggandeng sensor kecepatan pada bagian roda gigi mesin dan menghentikannya dengan perangkai ON, untuk melepaskan pembatas sensor kecepatan ..
Klik di sini untuk Situs Produsen.
http: // www. dilts-jepang. com / onlineshop / index. php? main_page = info_produk & cPath = 2 & products_id = 74
http: // www. dilts-jepang. com / hati-hati. html # penambah This is a speed limiter cut to improve the maximum speed by canceling the "speed sensor limiter" installed in the late model gyro system.
The new gyro system has a special speed sensor installed in the engine and the ECU controls the limiter when the maximum speed reaches 55km / h. (If you remove the speed sensor, the ECU will give an error and slow down)
The speed limiter is activated when the speed reaches 55km / h, independent of the speedometer and engine speed.
Therefore, even if you install a high speed pulley, the maximum speed will be controlled at 55km/h. This product solves these problems by removing the coupler of the speed sensor attached to the gear part of the engine and interrupting it by turning on the coupler, and releases the limiter by the speed sensor.
Click here for the manufacturer's website
http://www.dilts-japan.com/onlineshop/index.php?main_page=product_info&cPath=2&products_id=74
http://www.dilts-japan.com/caution.html#enhancer
Sistem giro baru memiliki sensor kecepatan khusus yang dipasang di mesin, dan ECU mengontrol pembatas saat kecepatan tertinggi mencapai 55 km / jam.. (Melepaskan sensor kecepatan akan menyebabkan ECU error dan melambat.)
Ini adalah sensor kecepatan yang tidak bergantung pada speedometer, sehingga mengaktifkan pembatas kecepatan saat kecepatan 55 km / jam, terlepas dari tampilan kecepatan pada meteran atau putaran mesin ..
Oleh karena itu, meskipun katrol kecepatan tinggi dipasang, kecepatan maksimum dikontrol pada 55 km / jam.. Produk ini mengatasi masalah ini hanya dengan melepas penggandeng sensor kecepatan pada bagian roda gigi mesin dan menghentikannya dengan perangkai ON, untuk melepaskan pembatas sensor kecepatan ..
Klik di sini untuk Situs Produsen.
http: // www. dilts-jepang. com / onlineshop / index. php? main_page = info_produk & cPath = 2 & products_id = 74
http: // www. dilts-jepang. com / hati-hati. html # penambah This is a speed limiter cut to improve the maximum speed by canceling the "speed sensor limiter" installed in the late model gyro system.
The new gyro system has a special speed sensor installed in the engine and the ECU controls the limiter when the maximum speed reaches 55km / h. (If you remove the speed sensor, the ECU will give an error and slow down)
The speed limiter is activated when the speed reaches 55km / h, independent of the speedometer and engine speed.
Therefore, even if you install a high speed pulley, the maximum speed will be controlled at 55km/h. This product solves these problems by removing the coupler of the speed sensor attached to the gear part of the engine and interrupting it by turning on the coupler, and releases the limiter by the speed sensor.
Click here for the manufacturer's website
http://www.dilts-japan.com/onlineshop/index.php?main_page=product_info&cPath=2&products_id=74
http://www.dilts-japan.com/caution.html#enhancer
Peringatan
* Produk ini ditujukan untuk kompetisi / balap.
* Ada reburitte yang memutuskan "batas atas putaran mesin" daripada kecepatan untuk melindungi mesin untuk ECU.
* Rotasi akan naik sekitar 9000rpm mendekati batas saat memasang produk ini tetapi ini adalah area berbahaya bagi mesin.
* Ini dapat menyebabkan kerusakan serius pada mesin jika digunakan dengan cara yang salah.
* Bingkai TD02 / TA03 No.. tidak sesuai dengan model lama karena tidak ada sensor kecepatan yang dipasang.
*This product is intended for use in competition / racing.
*The ECU has a rev limit which is not a speed limit but an "upper limit of engine speed" to protect the engine.
*When this product is installed, the rpm will be increased to about 9000rpm, which is a dangerous area for the engine.
*If used improperly, the engine can be seriously damaged.
*TD02 / TA03 models with an older frame NO are not compatible as they are not equipped with a speed sensor.
*This product will only remove the limiter caused by the "Speed Sensor Limiter".The engine speed limiter is not cancelled.Due to the deterioration of the drivetrain of your motorcycle, the engine speed limiter may be activated and the maximum speed may not be improved.Read more about it here.
* Ada reburitte yang memutuskan "batas atas putaran mesin" daripada kecepatan untuk melindungi mesin untuk ECU.
* Rotasi akan naik sekitar 9000rpm mendekati batas saat memasang produk ini tetapi ini adalah area berbahaya bagi mesin.
* Ini dapat menyebabkan kerusakan serius pada mesin jika digunakan dengan cara yang salah.
* Bingkai TD02 / TA03 No.. tidak sesuai dengan model lama karena tidak ada sensor kecepatan yang dipasang.
*This product is intended for use in competition / racing.
*The ECU has a rev limit which is not a speed limit but an "upper limit of engine speed" to protect the engine.
*When this product is installed, the rpm will be increased to about 9000rpm, which is a dangerous area for the engine.
*If used improperly, the engine can be seriously damaged.
*TD02 / TA03 models with an older frame NO are not compatible as they are not equipped with a speed sensor.
*This product will only remove the limiter caused by the "Speed Sensor Limiter".The engine speed limiter is not cancelled.Due to the deterioration of the drivetrain of your motorcycle, the engine speed limiter may be activated and the maximum speed may not be improved.Read more about it here.
Model yang Sesuai
gyro X TD02-11-
gyro canopy TA03-11-
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/