Kembali ke atas

【XAM】Sprocket Belakang PREMIUM

Harga: Rp1,168,000

*Termasuk PPN 10%
Webike Points: 11,680 pts

Shipping point: 5.1 pts ( 5.1 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
Rp9,000

    • Pilih varian produk:
    • Nomor Produk:
    • A1201X35T

Mohon pilih varian produk terlebih dahulu.


Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

[Spesifikasi]

rantai Ukuran : 415

[Deskripsi]

● pengolahan THAMT (Teflon / keras anodized / proses pengobatan molibdenum)
Keras keras anodized aluminium + disulfided Molybdenum + Teflon (Permukaan)

Hanya anodized lapisan keras dapat menyebabkan kejang jika tekanan permukaan kontak adalah getaran tinggi atau denda atau gesekan terjadi di tempat-tempat terjadi gesekan.
anodized keras ini memiliki fungsi pelumasan diri dan berhasil meningkatkan kinerja ketahanan aus di Sprocket.

● Pelumasan · perlawanan Abrasi
Molibdenum disulfida yang telah menembus seluruh pori-pori Anodized oleh elektrodeposisi mengurangi hambatan gesek dari lapisan keras untuk lebar Besar.
Ada pelumasan yang digunakan untuk bagian geser tanpa pelumasan.

● daya tahan
Dalam uji ketahanan gesekan, kinerja daya tahan beberapa kali lebih tinggi dari anodized keras standar.

● kekerasan tinggi
Sekitar 130% peningkatan -150% dibandingkan dengan standar Anodized.

[Catatan]

* Bentuk sebenarnya dari produk mungkin berbeda dari produk pada foto.

Model yang Sesuai

  • 4.3

    29 Ulasan

  • 5

    Memuaskan

    18

    4

    Bagus

    6

    3

    Lumayan

    3

    2

    Kurang

    1

    1

    Mengecewakan

    1
  • Tulis Ulasan
  • Large weird satisfaction!

    2017/06/02

    by Japan User(translated)
    Along with full power, Chain also spoken, Sprocket also thought together and bought one more thing!I am satisfied with the appearance! I will try another one next time.
  • Awesome looking good quality sprocket. Put this on my Gb400 to replace the old and it looks great. There was some difficulty fitting the sprocket as the original nut had to be replaced with something smaller to make it fit, but it wasn't too difficult to

    2016/10/30

    by NO NAME
    Awesome looking good quality sprocket. Put this on my Gb400 to replace the old and it looks great. There was some difficulty fitting the sprocket as the original nut had to be replaced with something smaller to make it fit, but it wasn't too difficult to do. Was so much better than the original sprocket and made the bike feel new, given that the original sprocket was very old. I hope I won't need to replace any sprockets again anytime soon.
  • Especially, it does not seem to be written here - - -

    2016/10/13

    by Japan User(translated)
    If you dare say it - - ---------------------------------------------------*SEROW225WE (After 5MP1) , SEROW 250, TRICKER, XT 250 XSold separately X. A. M exclusive use Sprocket carrier "PCY" Required !!--------------------------------------------------With this there is nothing "Total cost" Because it changes considerablyIf I knew, I did not make this choice - - - etcI think that there are quite a few people, so think it is important information.And, Bae Wei this "PCY" Handling itI do not have a pattern. We would appreciate your additional consideration m (__) mOkay, the item is famous for AluminumSprocket"Kashima Coat" It was a wonderful dish that was decorated.Rather than saying Gold as Gold (Due to Coat) PrettyBlack will be sold, so if you do not like thisSpecial "Kara-OrderSystem" Please useYou can also use colorful things, so it's safe!
  • For Extreme!

    2016/09/22

    by Japan User(translated)
    Willy installed in DJEBEL for practice.At the time of purchasing a car body, 40 danches of the same Manufacturer were attached and Willy could be done as it was, but purchased and installed to earn even a lower Torque.As a result, Willy became easier to do in principle and it came to rise even in the second speed.I feel a little better, I felt my arms up.As a running impression on the public road again, the rotation became high and the fuel economy got worse a little as well.But, since the aim is Willy practice machine, it is divisible.From now on, it may be Recommendation for those who are Willy!
  • High quality, it is useful for setting the ideal GEAR ratio.

    2016/08/28

    by Japan User(translated)
    In my case, the normal gear ratio is too low geared SEA BASS - DF 200 We chose 40 dots of 520 Size for RearSprocket of DJEBEL. Compared with 45 NORMAL, it became easier to get on the urban area and expressway.If possible, I wanted to increase FrontSprocket by 1 to make Chain as it is, and I wanted to reduce RearSprocket by about 3, but unfortunately there was not one more Front's MODEL.(So ??Chain has also exchanged from 112 Piece of NORMAL to 110 Piece. )Accuracy of Sprocket installation is good, Bronze color Color is also favorite.I think that durability is somewhat inferior to the iron MODEL, but I feel Cost performance is good.
29 Ulasan Lihat semua