- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- GPZ900R Ninja
- Sparepart Motor
- Sparepart Mesin
- Radiator
- Oil Cooler
- Bracket Oil Cooler
- K-FACTORY
- K-FACTORY: Bracket Kipas Pendingin Oli Tipe Up
Bracket Kipas Pendingin Oli Tipe Up
- Nomor produk: 112TZAO007R
-
- IN STOCK
- Out Stock
- K-FACTORY
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
untuk Radiator Besar
[Kipas Radiator yang Sesuai] Produk OEM KAWASAKI "59502-0584" (Kipas Radiator Sebelumnya NINJA250) ■For Big Radiator
[Compatible Radiator Fan] KAWASAKI OEM item number "59502-0584" (NINJA250 early model radiator fan)
[Kipas Radiator yang Sesuai] Produk OEM KAWASAKI "59502-0584" (Kipas Radiator Sebelumnya NINJA250) ■For Big Radiator
[Compatible Radiator Fan] KAWASAKI OEM item number "59502-0584" (NINJA250 early model radiator fan)
[Deskripsi]
Ini adalah braket kipas saat memasang oil cooler di bagian belakang radiator.
Menggunakan braket untuk jenis pendingin oli K-FACTORY di bagian belakang prototipe radiator bulat tipe "Racing Core" (RRP 00) , dan ini adalah braket yang memasang kipas radiator saat memasang inti oil cooler bulat PLOT [F87-1050].
Bagian kiri dan kanan dijual terpisah sehingga 1 kipas dapat menanganinya.
(Foto # 1 ada di sisi kiri / # 2 di sisi kanan.) This is the fan bracket when the oil cooler is installed in the rear of the radiator.
This is a bracket to attach the radiator fan when the Proto's Round Oil Cooler Core "F87-1050" is installed with the K-FACTORY Oil Cooler Up Type Bracket at the rear of the Proto Round Radiator "Racing Core" Type (RRP00).
The right side and the left side are sold separately so that one fan can be used.
(The first image is on the left / the second is on the right)
Menggunakan braket untuk jenis pendingin oli K-FACTORY di bagian belakang prototipe radiator bulat tipe "Racing Core" (RRP 00) , dan ini adalah braket yang memasang kipas radiator saat memasang inti oil cooler bulat PLOT [F87-1050].
Bagian kiri dan kanan dijual terpisah sehingga 1 kipas dapat menanganinya.
(Foto # 1 ada di sisi kiri / # 2 di sisi kanan.) This is the fan bracket when the oil cooler is installed in the rear of the radiator.
This is a bracket to attach the radiator fan when the Proto's Round Oil Cooler Core "F87-1050" is installed with the K-FACTORY Oil Cooler Up Type Bracket at the rear of the Proto Round Radiator "Racing Core" Type (RRP00).
The right side and the left side are sold separately so that one fan can be used.
(The first image is on the left / the second is on the right)
Peringatan
* Untuk foto referensi instalasi, silakan klik "foto pertama" dan "foto kedua".
* Produk pada foto # 3 adalah referensi untuk 2 contoh pemasangan.
* Menggunakan braket ini, dan membutuhkan "kit kabel" secara terpisah saat memasang dua kipas radiator yang sesuai. (Ini menggunakan kabel STD untuk 1 kasus itu.) *Please click on the first and second and scale images for installation reference images.
*The third picture is an example of two sets installed.
*Wiring kit (sold separately) is required to install two compatible radiator fans using this bracket.(In the case of a single wire, use the stock wiring.)
* Produk pada foto # 3 adalah referensi untuk 2 contoh pemasangan.
* Menggunakan braket ini, dan membutuhkan "kit kabel" secara terpisah saat memasang dua kipas radiator yang sesuai. (Ini menggunakan kabel STD untuk 1 kasus itu.) *Please click on the first and second and scale images for installation reference images.
*The third picture is an example of two sets installed.
*Wiring kit (sold separately) is required to install two compatible radiator fans using this bracket.(In the case of a single wire, use the stock wiring.)
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/