- Beranda
- Motor
- HONDA 1001cc -
- CB1100F
- Sparepart Motor
- Bodywork
- Fairing
- Tutup Aki
- JSmotorcycle
- JSmotorcycle: Tutup Aki Replika
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Satu Sisi 1pc.
[Quantity] 1 piece per side
[Deskripsi]
The side cover has been discontinued by the manufacturer for quite a long time.
It may have been better when used parts were easily available, but now that the quantity of used parts is decreasing, they are no longer available at a reasonable price.
Second hand does not mean cheap anymore.
This cover that J's reproduced is made by ABS vacuum casting method, which is exactly the same as the stock method.
There are many types of ABS resin.
The method of injecting resin into a simple FRP mold used to make prototypes does not produce the same hard finish as the stock.
In addition, the production quantity is limited and the price of one piece is high.
J's has created all new molds to produce a shape that is very close to stock.
J's had been troubled by the price of used parts, but J's has achieved a reasonable price by mass production.
And the weak point of the stock is the weak fixing part to the frame.
It is made stronger than the stock one.
It is J's strong policy that "it's not just a rebirth".
As with the stock product, there is a mark on the back that indicates the hole position in case you want to attach a three-dimensional emblem to the side cover.
The side cover has been discontinued by the manufacturer for quite a long time.
It may have been better when used parts were easily available, but now that the quantity of used parts is decreasing, they are no longer available at a reasonable price.
Second hand does not mean cheap anymore.
This cover that J's reproduced is made by ABS vacuum casting method, which is exactly the same as the stock method.
There are many types of ABS resin.
The method of injecting resin into a simple FRP mold used to make prototypes does not produce the same hard finish as the stock.
In addition, the production quantity is limited and the price of one piece is high.
J's has created all new molds to produce a shape that is very close to stock.
J's had been troubled by the price of used parts, but J's has achieved a reasonable price by mass production.
And the weak point of the stock is the weak fixing part to the frame.
It is made stronger than the stock one.
It is J's strong policy that "it's not just a rebirth".
As with the stock product, there is a mark on the back that indicates the hole position in case you want to attach a three-dimensional emblem to the side cover.
It may have been better when used parts were easily available, but now that the quantity of used parts is decreasing, they are no longer available at a reasonable price.
Second hand does not mean cheap anymore.
This cover that J's reproduced is made by ABS vacuum casting method, which is exactly the same as the stock method.
There are many types of ABS resin.
The method of injecting resin into a simple FRP mold used to make prototypes does not produce the same hard finish as the stock.
In addition, the production quantity is limited and the price of one piece is high.
J's has created all new molds to produce a shape that is very close to stock.
J's had been troubled by the price of used parts, but J's has achieved a reasonable price by mass production.
And the weak point of the stock is the weak fixing part to the frame.
It is made stronger than the stock one.
It is J's strong policy that "it's not just a rebirth".
As with the stock product, there is a mark on the back that indicates the hole position in case you want to attach a three-dimensional emblem to the side cover.
The side cover has been discontinued by the manufacturer for quite a long time.
It may have been better when used parts were easily available, but now that the quantity of used parts is decreasing, they are no longer available at a reasonable price.
Second hand does not mean cheap anymore.
This cover that J's reproduced is made by ABS vacuum casting method, which is exactly the same as the stock method.
There are many types of ABS resin.
The method of injecting resin into a simple FRP mold used to make prototypes does not produce the same hard finish as the stock.
In addition, the production quantity is limited and the price of one piece is high.
J's has created all new molds to produce a shape that is very close to stock.
J's had been troubled by the price of used parts, but J's has achieved a reasonable price by mass production.
And the weak point of the stock is the weak fixing part to the frame.
It is made stronger than the stock one.
It is J's strong policy that "it's not just a rebirth".
As with the stock product, there is a mark on the back that indicates the hole position in case you want to attach a three-dimensional emblem to the side cover.
Peringatan
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/