- Beranda
- Sparepart Motor
- Knalpot
- DB Killer
- Auto Magic
- Auto Magic: Peredam Knalpot 100mm (Panjang)
Peredam Knalpot 100mm (Panjang)
- Nomor produk: BF60WM-L100
-
- IN STOCK
- Out Stock
- Auto Magic
- |
- 4.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
bentuk : Φ60
Mengetik : Tipe Dinding W
Ukuran : M
Kuantitas : 1 pc. Outer Diameter Size: Φ60
Type: W wall type
Punching size: M
Extension type: 100mm long
Quantity: 1 pc.
Mengetik : Tipe Dinding W
Ukuran : M
Kuantitas : 1 pc. Outer Diameter Size: Φ60
Type: W wall type
Punching size: M
Extension type: 100mm long
Quantity: 1 pc.
[Deskripsi]
[Petunjuk pemasangan baffle bagian dalam]
Tersedia sebagai tipe sambungan pegas.
Itu diperbaiki antara peredam dan pipa ekor ..
Selain itu, penyekat penyekat bagian dalam di ujung knalpot mencegahnya jatuh ke dalam ..
Tiga jenis produk tersedia untuk φ60, φ54 dan φ50.
Karena pipa ekor memiliki jarak bebas minus 3mm untuk diameter dalam pipa ekor, diameter bagian yang masuk ke pipa ekor adalah dengan ketebalan Φ57 jika untuk Φ60 ..
Bagian stopper (Panjang 3mm) memiliki diameter luar 60mm ..
(φ54 / φ50 bagian sama untuk φ54 / φ50 dengan minus φ3mm di dalam)
Derivative version from conventional products!
Longer and more effective sound purification/toning!
The perforated pipe has been extended from the conventional inner baffle to the inner side of the silencer.
It is effective not only in improving torque and fuel economy, but also in sound quality and volume.
1. The inner baffle has been extended to the inner side of the silencer.
2. The length of the silencer side is also available in two types, 100mm and 200mm.
3. The conventional inner baffle M size has shown improvement of exhaust efficiency such as the torque feeling, improvement in fuel consumption, and improvement of the broken sound, but it has not been able to meet expectations on noise reduction.The new Long Type is effective in terms of sound quality and volume.
Available in spring joint type.
It is attached between the silencer and the tail pipe.
There is also an inner baffle stopper at the end of the tail pipe to prevent it from falling in.
The lineup is only for Φ60.
The tailpipe outer diameter is indicated by a clearance of minus 3mm compared to the inner diameter, so if the tailpipe is Φ60, the part that goes inside has a thickness of Φ57.
The outer diameter of the stopper part (length 3mm) is shaped like Φ60.
(The part that goes inside for Φ54/Φ50 is the same with minus Φ3mm)
Tersedia sebagai tipe sambungan pegas.
Itu diperbaiki antara peredam dan pipa ekor ..
Selain itu, penyekat penyekat bagian dalam di ujung knalpot mencegahnya jatuh ke dalam ..
Tiga jenis produk tersedia untuk φ60, φ54 dan φ50.
Karena pipa ekor memiliki jarak bebas minus 3mm untuk diameter dalam pipa ekor, diameter bagian yang masuk ke pipa ekor adalah dengan ketebalan Φ57 jika untuk Φ60 ..
Bagian stopper (Panjang 3mm) memiliki diameter luar 60mm ..
(φ54 / φ50 bagian sama untuk φ54 / φ50 dengan minus φ3mm di dalam)
Derivative version from conventional products!
Longer and more effective sound purification/toning!
The perforated pipe has been extended from the conventional inner baffle to the inner side of the silencer.
It is effective not only in improving torque and fuel economy, but also in sound quality and volume.
1. The inner baffle has been extended to the inner side of the silencer.
2. The length of the silencer side is also available in two types, 100mm and 200mm.
3. The conventional inner baffle M size has shown improvement of exhaust efficiency such as the torque feeling, improvement in fuel consumption, and improvement of the broken sound, but it has not been able to meet expectations on noise reduction.The new Long Type is effective in terms of sound quality and volume.
Available in spring joint type.
It is attached between the silencer and the tail pipe.
There is also an inner baffle stopper at the end of the tail pipe to prevent it from falling in.
The lineup is only for Φ60.
The tailpipe outer diameter is indicated by a clearance of minus 3mm compared to the inner diameter, so if the tailpipe is Φ60, the part that goes inside has a thickness of Φ57.
The outer diameter of the stopper part (length 3mm) is shaped like Φ60.
(The part that goes inside for Φ54/Φ50 is the same with minus Φ3mm)
Peringatan
* Pipa ekor adalah pipa antara bagian pengumpul dan peredam suara.
* Bagian sambungan antara tail pipe dan silencer belum tentu benar lingkaran.
* Nilai numerik dari diameter bagian dalam bukaan sisipan pada sisi peredam akan berbeda tergantung pada pabrikannya.
* Penghenti sekat mungkin tidak tersangkut dan tidak dapat dipasang pada sambungan tipe flensa (Plat & jenis memperbaiki baut) bersama.
* Ada kemungkinan baffle stopper tidak tersangkut dan tidak dapat dipasang karena sambungan sudah terpasang dengan band seperti megafon KERKER. *Inner Baffle is a registered trademark of Auto Magic Co.
*All perforated pipe diameters are M size.
*The perforated pipe diameter S size is not scheduled for production at this time.
*All long types are for Φ60.
*When you install a new one, the glass wool is hardened by resin, and the resin is burned by the heat of the exhaust. During this time, smoke is produced for a short time.
*The tail pipe refers to the pipe between the merge collector and the silencer.
*The joint between the tail pipe and the silencer is not always a perfect circle.
*The inside diameter of the inlet on the silencer side varies from manufacturer to manufacturer.
*Flange type joint (plate & bolt type) joint may not be able to be installed because the stopper of baffle is not inserted.
*If the joint is fixed with a band, such as KERKER megaphones, the stopper on the baffle may not be able to be inserted.
*It is installed and fixed between the silencer and the EX tail pipe.If there is something in between, the inner baffle may not be able to be installed.
*If the inner diameter of the silencer is too small to fit in the silencer, it may not be possible to install the silencer.
*The EX tail pipe may not be able to be installed unless the outer and inner diameters of the tail pipe are regular circles.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Bagian sambungan antara tail pipe dan silencer belum tentu benar lingkaran.
* Nilai numerik dari diameter bagian dalam bukaan sisipan pada sisi peredam akan berbeda tergantung pada pabrikannya.
* Penghenti sekat mungkin tidak tersangkut dan tidak dapat dipasang pada sambungan tipe flensa (Plat & jenis memperbaiki baut) bersama.
* Ada kemungkinan baffle stopper tidak tersangkut dan tidak dapat dipasang karena sambungan sudah terpasang dengan band seperti megafon KERKER. *Inner Baffle is a registered trademark of Auto Magic Co.
*All perforated pipe diameters are M size.
*The perforated pipe diameter S size is not scheduled for production at this time.
*All long types are for Φ60.
*When you install a new one, the glass wool is hardened by resin, and the resin is burned by the heat of the exhaust. During this time, smoke is produced for a short time.
*The tail pipe refers to the pipe between the merge collector and the silencer.
*The joint between the tail pipe and the silencer is not always a perfect circle.
*The inside diameter of the inlet on the silencer side varies from manufacturer to manufacturer.
*Flange type joint (plate & bolt type) joint may not be able to be installed because the stopper of baffle is not inserted.
*If the joint is fixed with a band, such as KERKER megaphones, the stopper on the baffle may not be able to be inserted.
*It is installed and fixed between the silencer and the EX tail pipe.If there is something in between, the inner baffle may not be able to be installed.
*If the inner diameter of the silencer is too small to fit in the silencer, it may not be possible to install the silencer.
*The EX tail pipe may not be able to be installed unless the outer and inner diameters of the tail pipe are regular circles.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/