- Beranda
- Motor
- DUCATI 1001cc -
- MULTISTRADA 1200 (MTS1200)
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Film Pelindung Speedometer
- MotoCrazy
- MotoCrazy: Meter Protection Film
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan : MEMBELAI
Finishing : Finishing Permukaan Lapisan Fluor
Konstitusi : Struktur 3 lapis (Film Pelindung Permukaan + Badan Film Pelindung + Film Pelepas Permukaan Perekat)
Permukaan Hisap : Jenis Adsorpsi Diri Membran Silikon
Buatan Jepang Material: PET
Finish: Surface fluorine coat glossy finish
Configuration:Three-layered structure (surface protective film + protective film body + suction surface release film)
Adsorption surface: Silicon film self-adhesive type
made in Japan
Finishing : Finishing Permukaan Lapisan Fluor
Konstitusi : Struktur 3 lapis (Film Pelindung Permukaan + Badan Film Pelindung + Film Pelepas Permukaan Perekat)
Permukaan Hisap : Jenis Adsorpsi Diri Membran Silikon
Buatan Jepang Material: PET
Finish: Surface fluorine coat glossy finish
Configuration:Three-layered structure (surface protective film + protective film body + suction surface release film)
Adsorption surface: Silicon film self-adhesive type
made in Japan
[Deskripsi]
Film ini dirancang khusus untuk melindungi mobil Anda dari goresan dan kotoran dengan menempelkannya pada panel meteran ..
Dipotong menurut jenis mobil menggunakan film tiga lapis berkualitas tinggi buatan Jepang dengan transmisi cahaya dan kilau tinggi.
Film berlapis fluor tahan noda dan gores, dan perekat diri dengan silikon tahan gelembung, sehingga mudah diaplikasikan.
Ini bisa diterapkan kembali ..
Ini adalah item yang bagus untuk dipasang dari mobil baru !.
[Metode Tempel]
Kelupas sebagian film untuk mencegah debu dan sidik jari muncul di permukaan ..
Lepaskan film pelindung permukaan di akhir aplikasi ..
* Debu pada permukaan perekat silikon dapat dihilangkan dengan mengaplikasikan selotip ringan ..
* Hapus gelembung udara dengan menekan dengan jari-jari Anda atau mengangkat tepinya sedikit dan mengoleskannya kembali. This film is specially designed to be attached to the meter panel to protect it from dirt and scratches.
High quality Japanese made triple layer film with high light transmittance and glossy finish.
The fluorine-coated film is scratch and stain resistant, and the self-adhesive silicon film prevents air bubbles from forming, making it easy to apply.
It can also be reapplied.
This item should be installed from the time the bike is new.
[Paste method]
●To prevent dust and fingerprints from sticking to the surface, peel off the film to protect the surface from dust and fingerprints.
●When you are done, remove the protective film from the surface.
*Dust on the silicon adsorption surface can be removed with a light touch of cellophane tape.
*Remove air bubbles by gently pushing them out with your finger or by lifting the edge slightly and reapplying.
Dipotong menurut jenis mobil menggunakan film tiga lapis berkualitas tinggi buatan Jepang dengan transmisi cahaya dan kilau tinggi.
Film berlapis fluor tahan noda dan gores, dan perekat diri dengan silikon tahan gelembung, sehingga mudah diaplikasikan.
Ini bisa diterapkan kembali ..
Ini adalah item yang bagus untuk dipasang dari mobil baru !.
[Metode Tempel]
Kelupas sebagian film untuk mencegah debu dan sidik jari muncul di permukaan ..
Lepaskan film pelindung permukaan di akhir aplikasi ..
* Debu pada permukaan perekat silikon dapat dihilangkan dengan mengaplikasikan selotip ringan ..
* Hapus gelembung udara dengan menekan dengan jari-jari Anda atau mengangkat tepinya sedikit dan mengoleskannya kembali. This film is specially designed to be attached to the meter panel to protect it from dirt and scratches.
High quality Japanese made triple layer film with high light transmittance and glossy finish.
The fluorine-coated film is scratch and stain resistant, and the self-adhesive silicon film prevents air bubbles from forming, making it easy to apply.
It can also be reapplied.
This item should be installed from the time the bike is new.
[Paste method]
●To prevent dust and fingerprints from sticking to the surface, peel off the film to protect the surface from dust and fingerprints.
●When you are done, remove the protective film from the surface.
*Dust on the silicon adsorption surface can be removed with a light touch of cellophane tape.
*Remove air bubbles by gently pushing them out with your finger or by lifting the edge slightly and reapplying.
Peringatan
* Spesifikasi dan tampilan produk dapat berubah sewaktu-waktu tanpa pemberitahuan sebelumnya karena adanya peningkatan performa dan lain-lain.
*Specifications and appearance are subject to change without notice due to performance improvement or other reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/