- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Swingarm
- GM-MOTO
- GM-MOTO: Swingarm Super Lebar Tipe WGF2 dengan Stabilizer untuk MONKEY (7.0J)
Swingarm Super Lebar Tipe WGF2 dengan Stabilizer untuk MONKEY (7.0J)
- Nomor produk: mky-00255
-
- IN STOCK
- Out Stock
- GM-MOTO
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Swingarm: Tipe dengan stabilizer
Bahan: Aluminium
Lebar: Kiri dan kanan lebar 4.5cm (model super duper lebar 260mmi)
Dibuat di CINA Swingarm: Type with Stabilizer
Material: Aluminum
Wide Width: Left and Right 4.5cm Expansion Width (260mm Wide Ultra-super Wide Specification)
Made in CHINA
Bahan: Aluminium
Lebar: Kiri dan kanan lebar 4.5cm (model super duper lebar 260mmi)
Dibuat di CINA Swingarm: Type with Stabilizer
Material: Aluminum
Wide Width: Left and Right 4.5cm Expansion Width (260mm Wide Ultra-super Wide Specification)
Made in CHINA
[Deskripsi]
Lengan ayun yang lebar dengan bagian heksagonal yang sangat tebal bahkan menjadi lebih lebar!
Lengan ayun lebar untuk monyet yang diawasi sepenuhnya oleh GM-MOTO sekarang mendukung 7.0J!
Tentu saja, produksinya adalah produk aluminium presisi tinggi oleh KEPSPEED.
Lebar lebar adalah lebar super lebar 260 mm dengan lebar 4,5 cm di kedua sisinya.
Selain itu, kami secara bersamaan mengembangkan hub super-lebar, suspensi super-lebar, kit offset sproket penggerak 7.0J yang sesuai, 7.0J 3pcs. roda aluminium, dll., dan Anda tidak perlu khawatir tentang pemilihan suku cadang jika Anda membelinya secara bersamaan karena akan dirilis.
Extra thick hexagonal section wide swingarm is now even wider!
GM-MOTO fully supervised wide swingarm for MONKEY is compatible with 7.0J!
Of course, it is made by KEPSPEED, a high precision aluminum product.
The wide width is super wide specification with 260mm width which is 4.5cm wider on both sides.
GM-MOTO has also developed and released Super Wide Hub, Super Wide Suspension, 7.0J Compatible Drive Sprocket Offset Kit and 7.0J 3 Piece Aluminum Wheel at the same time, so if you purchase them at the same time, you don't have to worry about the parts selection.
Lengan ayun lebar untuk monyet yang diawasi sepenuhnya oleh GM-MOTO sekarang mendukung 7.0J!
Tentu saja, produksinya adalah produk aluminium presisi tinggi oleh KEPSPEED.
Lebar lebar adalah lebar super lebar 260 mm dengan lebar 4,5 cm di kedua sisinya.
Selain itu, kami secara bersamaan mengembangkan hub super-lebar, suspensi super-lebar, kit offset sproket penggerak 7.0J yang sesuai, 7.0J 3pcs. roda aluminium, dll., dan Anda tidak perlu khawatir tentang pemilihan suku cadang jika Anda membelinya secara bersamaan karena akan dirilis.
Extra thick hexagonal section wide swingarm is now even wider!
GM-MOTO fully supervised wide swingarm for MONKEY is compatible with 7.0J!
Of course, it is made by KEPSPEED, a high precision aluminum product.
The wide width is super wide specification with 260mm width which is 4.5cm wider on both sides.
GM-MOTO has also developed and released Super Wide Hub, Super Wide Suspension, 7.0J Compatible Drive Sprocket Offset Kit and 7.0J 3 Piece Aluminum Wheel at the same time, so if you purchase them at the same time, you don't have to worry about the parts selection.
Peringatan
*Swingarm ini adalah produk KEPSPEED yang memproduksi suku cadang aluminium berkualitas tinggi.
*Swingarm ini dirancang untuk digunakan tanpa penyetelan saat digunakan dengan set lengkap.
*Harap dicatat bahwa itu tidak memverifikasi kesesuaian kombinasi dengan produk merk lain.
*Silakan beli sesuai dengan lebar dan panjang swingarm. Tiang rem dan tromol dijual terpisah.
*Mohon dipasang dengan mekanik atau di bengkel.
*Harap pastikan untuk memeriksa apakah ada titik kontak yang tidak normal bahkan ketika shock belakang dalam kondisi dasar penuh.
*Lakukan proses untuk mengurangi celah dengan washer jika ada celah 0,5 mm atau lebih antara rangka Anda dan swingarm ini.
*Ini mungkin merusak kasus terburuk jika poros pivot dikencangkan sementara jarak bebasnya besar, beban tinggi dapat diterapkan ke swingarm.
*Harap lakukan pemeriksaan rutin agar tidak menimbulkan masalah yang tidak terduga seperti kelonggaran awal komponen saat berkendara.
*Ada kasus yang memiliki goresan kecil karena keadaan transportasi, dan tidak tercakup dalam garansi kecuali untuk cacat yang tidak sesuai dengan fungsi produk. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
*This swingarm is designed to be used without adjustment when the complete kit is used.
※ GM-MOTO has not verified the consistency of the combination with other companies' products.
*Brake rods for drum brakes are sold separately.Please purchase according to the width and length of the swingarm.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain will vary depending on the condition of your vehicle and the front and rear sprockets.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
*Swingarm ini dirancang untuk digunakan tanpa penyetelan saat digunakan dengan set lengkap.
*Harap dicatat bahwa itu tidak memverifikasi kesesuaian kombinasi dengan produk merk lain.
*Silakan beli sesuai dengan lebar dan panjang swingarm. Tiang rem dan tromol dijual terpisah.
*Mohon dipasang dengan mekanik atau di bengkel.
*Harap pastikan untuk memeriksa apakah ada titik kontak yang tidak normal bahkan ketika shock belakang dalam kondisi dasar penuh.
*Lakukan proses untuk mengurangi celah dengan washer jika ada celah 0,5 mm atau lebih antara rangka Anda dan swingarm ini.
*Ini mungkin merusak kasus terburuk jika poros pivot dikencangkan sementara jarak bebasnya besar, beban tinggi dapat diterapkan ke swingarm.
*Harap lakukan pemeriksaan rutin agar tidak menimbulkan masalah yang tidak terduga seperti kelonggaran awal komponen saat berkendara.
*Ada kasus yang memiliki goresan kecil karena keadaan transportasi, dan tidak tercakup dalam garansi kecuali untuk cacat yang tidak sesuai dengan fungsi produk. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
*This swingarm is designed to be used without adjustment when the complete kit is used.
※ GM-MOTO has not verified the consistency of the combination with other companies' products.
*Brake rods for drum brakes are sold separately.Please purchase according to the width and length of the swingarm.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain will vary depending on the condition of your vehicle and the front and rear sprockets.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/