Kembali ke atas

【DAYTONA】Satu Set Kopling Primer Heavy Duty 3 Disc

Harga: Rp1,525,000

*Termasuk PPN 10%
Webike Points: 15,250 pts

Shipping point: 26 pts ( 26 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
Rp27,000

    • Nomor Produk:
    • 95634

Mohon tunggu...


Model yang Sesuai:

MONKEY R 87 AB22 [Frame No.] AB22-1000017 or later
MONKEY RT 88 AB22 [Frame No.] AB22-1007601 or later
MONKEY BAJA 92 [Frame No.] Z50J-2000001 to 2006661
Lihat lebih lanjut

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

[Deskripsi]

● Diperlukan 3disc Reinforced Clutch Kit untuk Mesin Tuned.
● 110cc yang normal sesuai dengan mesin setara dengan kepala Hyper.
● drive gigi Primer / Rasio gigi reduksi utama adalah jenis tercepat (16 T / 69 anjing → 18 anjing / Ini akan menjadi 67). (Sama rasio gigi primer sebagai perusahaan DAYTONA sisi sekunder Clutch) Clutch luar penutup sekrup sulit untuk menanggung Hexagon Socket Jenis datang disertakan.

[Catatan]

* Tidak mungkin kopling sentrifugal. Ini untuk kopling manual.
Kopling bisa tergelincir dan perumahan kopling bisa rusak saat dipasang pada mesin berdaya tinggi (111cc atau lebih, kepala camshaft kembar dll). Silakan gunakan kit kopling sekunder.

Model yang Sesuai

    • MONKEY R 87 AB22 [Frame No.] AB22-1000017 or later
    • MONKEY RT 88 AB22 [Frame No.] AB22-1007601 or later
    • MONKEY BAJA 92 [Frame No.] Z50J-2000001 to 2006661
    • MONKEY BAJA 93 [Frame No.] Z50J - 2100001 or later
    • MONKEY BAJA 91 [Frame No.] Z 50 J - 1700001 to 1900805
  • 4.5

    18 Ulasan

  • 5

    Sangat baik

    12

    4

    Baik

    5

    3

    Sedang

    0

    2

    Buruk

    0

    1

    Buruk

    1
  • Tulis Ulasan
  • This daytona is confident.

    2017/08/18

    by NO NAME
    I will apply to my car to take me to the desired destination. And to get the engine power I've tuned into my car. I am very confident in this product. I am very confident in this product. Because most of the customization used in my car is used, but this product is almost all of this. This daytona name is where I am confident in the product and its performance will get back.
  • Clutch is also cheap and light

    2016/07/14

    by Japan User(translated)
    * Since I forgot to check Impression CONST test, it is a re-post.. I'm sorry if I was covered.【What made you decide the purchase?】 Price and function【How was it actually used?】 While being strengthened, Lever's lightness is also light.【Was it difficult to install? (Hard parts case)】 It closes every time for the hardness of pure Normal Thread Screw of Centrifuge Filter cover.【Please tell me the point of installation and hang (in the case of Hard parts)】 Anyway, arrange the tools carefully.【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 -[Is there anything I was disappointed about?] There is none.【Hope for Manufacturer - Please let me know if there are any improvement points; I would like Screw of Filter cover to be the hex head..【Have you compared items?】 Takegawa and SHIFT UP Reinforced Clutch[Others]Purchase with webike. In relation to making CUB 90 over 110 cc, Manual clutchization against the increasing PowerI bought it for.I went to Smooth without much difficulty in installation, but I wrote that the sound comes out with impressionAs I saw it, I made a sufficient oil bath in Friction disk in advance.Initially it was a little dragged and dragged, slipping at the time of KICK came out, but it quickly dissolved and calmed down.Although Lever's pull is light, it seems that it is being properly strengthened, and there is no feeling of sliding and it connects spatially at all.After one year of use I am making Mukawa centrifuge for the pursuit of CUB likeness, but this Clutch of DAYTONA is mediumIt was easy to use.It's a bit cheaper compared to others, it's not heavy, and it's recommended because it's not a problem quality.
  • Clutch is also cheap and light

    2016/07/14

    by Japan User(translated)
    【What made you decide the purchase?】 Price and function【How was it actually used?】 While being strengthened, Lever's lightness is also light.【Was it difficult to install? (Hard parts case)】 It closes every time for the hardness of pure Normal Thread Screw of Centrifuge Filter cover.【Please tell me the point of installation and hang (in the case of Hard parts)】 Anyway, arrange the tools carefully.【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 -[Is there anything I was disappointed about?] There is none.【Hope for Manufacturer - Please let me know if there are any improvement points; I would like Screw of Filter cover to be the hex head..【Have you compared items?】 Takegawa and SHIFT UP Reinforced Clutch[Others]Purchase with webike. In relation to making CUB 90 over 110 cc, Manual clutchization against the increasing PowerI bought it for.I went to Smooth without much difficulty in installation, but I wrote that the sound comes out with impressionAs I saw it, I made a sufficient oil bath in Friction disk in advance.Initially it was a little dragged and dragged, slipping at the time of KICK came out, but it quickly dissolved and calmed down.Although Lever's pull is light, it seems that it is being properly strengthened, and there is no feeling of sliding and it connects spatially at all.After one year of use I am making Mukawa centrifuge for the pursuit of CUB likeness, but this Clutch of DAYTONA is mediumIt was easy to use.It's a bit cheaper compared to others, it's not heavy, and it's recommended because it's not a problem quality.
  • DAYTONA Primary Side Reinforced 3 Disc Clutch Kit

    2016/05/23

    by Japan User(translated)
    I attached it along with Bore up. I think that the ratio of GEAR changes as well. I thought that fitting with Sprocket was troublesome, I aimed for two birds with one stone. The function of Clutch itself seems to be connected to sputtering
  • Noise from Clutch?

    2016/05/15

    by Japan User(translated)
    When I tried built-in test run, when I grip Clutch lever I heard a rattling sound. Is it a misplacement in the early stage? Is there a mistake in installation? Also, there was no play of Clutch that was there before (I can not cut when making play) Is it such a thing? Clutch is also well broken and connected with no problem for running.
18 Ulasan Lihat semua

Produk Teratas

【SP Takegawa】Slipper Clutch Kit
Perlengkapan Slipper Clutch SP Takegawa
【SP Takegawa】Special Clutch Kit
Satu Set Kopling Khusus SP Takegawa
【PMC】Easy Clutch Kit [PMC Winter Sale] [Special Price Item]
Easy Clutch Kit PMC
【OVER RACING】Light Touch Clutch Kit
Satu Set Kopling Light Touch OVER RACING
【KITACO】Clutch Kit
Satu Set Kopling KITACO
【KN Planning】Sports Clutch
Kopling Sports KN Planning
【KN Planning】Power Grip Clutch Outer
Rumah Kopling Power Grip KN Planning