- Beranda
- Aksesoris
- Kelistrikan
- Case / Bracket Pemasangan ETC
- DAYTONA
- DAYTONA: Bracket ETC Antena Amerika
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Sudut setelan: 180 derajat
Adjustment angle: 180 degrees
[Deskripsi]
Ini adalah braket antena ETC yang berspesialisasi dalam pemasangan ke Amerika.
Hal ini dimungkinkan untuk dipasang pada jembatan atas, atau dapat diikat bersama dengan baut bodi kendaraan seperti braket bawah.
Ini memiliki koneksi atas dan bawah untuk menahan getaran tubuh kendaraan.
Itu dapat disesuaikan sudut 180 derajat.
Ini memungkinkan untuk digunakan untuk memasang antena tipe tunggal ETC BE700 / 51/31 dan JRM-11/21. ETC antenna bracket specially designed for installation on Cruisers.
Can be attached to the top bridge or cotightened to the body bolts such as under the under bracket.
The upper and lower couplings are double-sided in order to withstand the vibration of the train.
180 degree angle adjustment.
It can be used for the antenna installation of the antenna separate type ETC BE700 / 51 / 31 and JRM-11 / 21.
Hal ini dimungkinkan untuk dipasang pada jembatan atas, atau dapat diikat bersama dengan baut bodi kendaraan seperti braket bawah.
Ini memiliki koneksi atas dan bawah untuk menahan getaran tubuh kendaraan.
Itu dapat disesuaikan sudut 180 derajat.
Ini memungkinkan untuk digunakan untuk memasang antena tipe tunggal ETC BE700 / 51/31 dan JRM-11/21. ETC antenna bracket specially designed for installation on Cruisers.
Can be attached to the top bridge or cotightened to the body bolts such as under the under bracket.
The upper and lower couplings are double-sided in order to withstand the vibration of the train.
180 degree angle adjustment.
It can be used for the antenna installation of the antenna separate type ETC BE700 / 51 / 31 and JRM-11 / 21.
Peringatan
Ketika menggunakan double tape, bersihkan permukaan terlebih dahulu.
*Ketika memasang ETC ke bracket bawah, cek stroke shock depan sebelumnya untuk memastikan tidak bersinggungan.
*Sesuai instruksi manual ETC, pasang ETC di sudut tertentu. *Installation must be done by an authorized "Motorcycle ETC Setup Shop".
*When installing with double-sided tape, degrease the surface sufficiently.
*When installing to the under bracket, check the stroke length of the front fork beforehand and make sure there is no interference.
*Install the ETC at the specified angle according to the instruction manual of the ETC.
*Ketika memasang ETC ke bracket bawah, cek stroke shock depan sebelumnya untuk memastikan tidak bersinggungan.
*Sesuai instruksi manual ETC, pasang ETC di sudut tertentu. *Installation must be done by an authorized "Motorcycle ETC Setup Shop".
*When installing with double-sided tape, degrease the surface sufficiently.
*When installing to the under bracket, check the stroke length of the front fork beforehand and make sure there is no interference.
*Install the ETC at the specified angle according to the instruction manual of the ETC.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/