- Beranda
- Aksesoris
- Perlengkapan Sepeda Motor
- Perlengkapan Motor Lainnya
- MINOURA
- MINOURA: Dudukan Tempat Minum BH-100
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Warna Logo]
Model BH-100-S : Merah
Model BH-100-M : Hitam
[Kode Produk]
Model BH-100-S : 339-3100-00
Model BH-100-M : 339-3110-00
[Bahan] Aluminium, Baja Tahan Karat
[Berat]
Model BH-100-S : 79g
Model BH-100-M : 80g
[Maksimum Membawa Berat] hingga 300g
[Ukuran Mountable (diameter)]
Model BH-100-S : Diameter 22-29mm
Model BH-100-M : Diameter 28-35mm
[Termasuk Bagian]
Baut Pemasangan Kandang Botol x2pcs.
Kursi Transparan
[Logo colors]
・BH-100-S model: Red
・BH-100-M model: Black
[Product Code]
・BH-100-S model: 339-3100-00
・BH-100-M model: 339-3110-00
[Material] Aluminum, Stainless steel
[Weight]
・BH-100-S model: 79g
・BH-100-M model: 80g
[Maximum holdable weight] Up to 300g
[Mountable size (diameter)]
・BH-100-S model: Diameter 22-29mm
・BH-100-M model: Diameter 28-35mm
[Components]
・2 bolts for mounting the bottle cage
・Transparent sheet
Model BH-100-S : Merah
Model BH-100-M : Hitam
[Kode Produk]
Model BH-100-S : 339-3100-00
Model BH-100-M : 339-3110-00
[Bahan] Aluminium, Baja Tahan Karat
[Berat]
Model BH-100-S : 79g
Model BH-100-M : 80g
[Maksimum Membawa Berat] hingga 300g
[Ukuran Mountable (diameter)]
Model BH-100-S : Diameter 22-29mm
Model BH-100-M : Diameter 28-35mm
[Termasuk Bagian]
Baut Pemasangan Kandang Botol x2pcs.
Kursi Transparan
[Logo colors]
・BH-100-S model: Red
・BH-100-M model: Black
[Product Code]
・BH-100-S model: 339-3100-00
・BH-100-M model: 339-3110-00
[Material] Aluminum, Stainless steel
[Weight]
・BH-100-S model: 79g
・BH-100-M model: 80g
[Maximum holdable weight] Up to 300g
[Mountable size (diameter)]
・BH-100-S model: Diameter 22-29mm
・BH-100-M model: Diameter 28-35mm
[Components]
・2 bolts for mounting the bottle cage
・Transparent sheet
[Deskripsi]
Tempat sangkar botol dengan pemasangan dan pelepasan satu sentuhan
Tempat untuk memasang botol ekstra di stang atau tiang pengaman ..
Penjepit cepat yang baru dikembangkan memungkinkan pemasangan dan pelepasan botol dengan satu sentuhan, sehingga mudah untuk melengkapi botol cadangan hanya jika diperlukan, seperti saat bepergian ..
BH-100 tersedia dalam dua diameter penjepit yang berbeda ..
Model BH-100-S]
Kompatibel dengan diameter 22-29mm ..
Logo yang dicetak di sisi penjepit berwarna merah ..
Kompatibel dengan setang dan tiang kursi umum.
Model BH-100-M]
Kompatibel dengan diameter 28-35mm ..
Warna logo yang tercetak di sisi penjepit berwarna hitam ..
Untuk setang berukuran besar dan tiang jok tebal untuk kendaraan berdiameter kecil ..
Mekanisme gigi roda gigi di dalam dudukan memungkinkan dudukan dipasang pada sudut 12 derajat yang berbeda ..
Ini memungkinkan botol diposisikan dekat dengan vertikal, misalnya. pada sudut bilah riser ..
Botolnya juga bisa dimiringkan dengan sengaja untuk memudahkan pelepasan ..
Dudukannya terbuat dari stainless steel tahan karat ..
Badan penjepit juga terbuat dari alumunium untuk mencegah karat ..
Termasuk 2 baut untuk memasang sangkar botol.
Tentang Penjepit Cepat Baru
Fleksibel, tipe universal tanpa alat.
Tali baja tahan karat pada BH-95X sebelumnya adalah mekanisme yang sangat mudah digunakan yang memungkinkan satu ukuran untuk menutupi hingga 22-35mm, tetapi agak sulit untuk memasang dan membutuhkan alat, sehingga tidak dapat dengan mudah dilepas saat tidak dibutuhkan ..
Penjepit cepat yang baru dikembangkan dapat dengan mudah dipasang dan dilepas tanpa memerlukan alat, sehingga botol cadangan dapat dipasang dengan cepat dan hanya jika diperlukan ..
Dengan hanya mengatur baut di dasar penjepit, penjepit dapat diubah ukurannya untuk mengakomodasi pipa dengan diameter berbeda.
Setelah itu, Anda dapat dengan mudah memperbaikinya di tempatnya hanya dengan melipat tuas ..
S-Clamp mencakup kisaran 22-29mm dan dapat digunakan dengan setang standar 22mm dan tiang jok 27mm.
Itu juga dapat dipasang pada pegangan drop jalan dengan ruang kosong, bahkan dengan pita batang melilitnya !.
M-clamp mencakup hingga 28-35mm dan dapat dipasang di dasar setang berukuran 32mm atau pada tiang kursi yang lebih tebal pada mobil kecil. Bottle cage holder with one-touch installation and removal
This holder allows you to mount one spare bottle on the handlebar or seat post.
The newly developed quick clamp allows one-touch mounting and dismounting, so you can easily equip a spare bottle only when you need it, such as when going on a long trip.
■There are two types of BH-100 with different clamp diameters.
Model BH-100-S
・Suitable for 22-29mm diameter.
・Logo printing color on the side of the clamp is red.
・Compatible with standard handlebars and seat posts.
Model BH-100-M
・Suitable for 28-35mm diameter.
・Logo printing on the side of the clamp is black.
・Compatible with oversized handlebars and ultra-thick seatposts for small bikes.
There is a gear tooth mechanism inside the holder, and the mounting angle can be changed every 12 degrees.
This makes it possible, for example, to set the bottle close to vertical even on the inclined part of the riser bar.
It can also be deliberately sloped to make it easier to remove the bottle.
The holder is made of rustproof stainless steel.
The clamp body is also made of aluminum to prevent rust.
Includes 2 bolts for mounting the bottle cage.
■About the new quick clamp
Universal type for flexible use without tools.
The stainless steel band used for the BH-95X was a very useful mechanism that could cover 22-35mm with one size, but it was not easy to remove the band when it was not needed because it required some tricks and tools to put it on.
The newly developed quick clamp can be easily installed and removed without tools, allowing you to quickly attach a spare bottle only when needed.
By simply adjusting the bolt at the base of the clamp, the clamp can change its size to accommodate pipes of various diameters.
After that, it can be easily fixed by simply folding the lever.
The S-Clamp covers a range of 22-29mm and can be mounted on a standard 22mm handlebar or 27mm seat post.
It can also be mounted on road drop handlebars with bar tape.
The M-Clamp covers the range 28-35mm and can be mounted at the base of 32mm oversized handlebars or on very thick seat posts of small bikes.
Tempat untuk memasang botol ekstra di stang atau tiang pengaman ..
Penjepit cepat yang baru dikembangkan memungkinkan pemasangan dan pelepasan botol dengan satu sentuhan, sehingga mudah untuk melengkapi botol cadangan hanya jika diperlukan, seperti saat bepergian ..
BH-100 tersedia dalam dua diameter penjepit yang berbeda ..
Model BH-100-S]
Kompatibel dengan diameter 22-29mm ..
Logo yang dicetak di sisi penjepit berwarna merah ..
Kompatibel dengan setang dan tiang kursi umum.
Model BH-100-M]
Kompatibel dengan diameter 28-35mm ..
Warna logo yang tercetak di sisi penjepit berwarna hitam ..
Untuk setang berukuran besar dan tiang jok tebal untuk kendaraan berdiameter kecil ..
Mekanisme gigi roda gigi di dalam dudukan memungkinkan dudukan dipasang pada sudut 12 derajat yang berbeda ..
Ini memungkinkan botol diposisikan dekat dengan vertikal, misalnya. pada sudut bilah riser ..
Botolnya juga bisa dimiringkan dengan sengaja untuk memudahkan pelepasan ..
Dudukannya terbuat dari stainless steel tahan karat ..
Badan penjepit juga terbuat dari alumunium untuk mencegah karat ..
Termasuk 2 baut untuk memasang sangkar botol.
Tentang Penjepit Cepat Baru
Fleksibel, tipe universal tanpa alat.
Tali baja tahan karat pada BH-95X sebelumnya adalah mekanisme yang sangat mudah digunakan yang memungkinkan satu ukuran untuk menutupi hingga 22-35mm, tetapi agak sulit untuk memasang dan membutuhkan alat, sehingga tidak dapat dengan mudah dilepas saat tidak dibutuhkan ..
Penjepit cepat yang baru dikembangkan dapat dengan mudah dipasang dan dilepas tanpa memerlukan alat, sehingga botol cadangan dapat dipasang dengan cepat dan hanya jika diperlukan ..
Dengan hanya mengatur baut di dasar penjepit, penjepit dapat diubah ukurannya untuk mengakomodasi pipa dengan diameter berbeda.
Setelah itu, Anda dapat dengan mudah memperbaikinya di tempatnya hanya dengan melipat tuas ..
S-Clamp mencakup kisaran 22-29mm dan dapat digunakan dengan setang standar 22mm dan tiang jok 27mm.
Itu juga dapat dipasang pada pegangan drop jalan dengan ruang kosong, bahkan dengan pita batang melilitnya !.
M-clamp mencakup hingga 28-35mm dan dapat dipasang di dasar setang berukuran 32mm atau pada tiang kursi yang lebih tebal pada mobil kecil. Bottle cage holder with one-touch installation and removal
This holder allows you to mount one spare bottle on the handlebar or seat post.
The newly developed quick clamp allows one-touch mounting and dismounting, so you can easily equip a spare bottle only when you need it, such as when going on a long trip.
■There are two types of BH-100 with different clamp diameters.
Model BH-100-S
・Suitable for 22-29mm diameter.
・Logo printing color on the side of the clamp is red.
・Compatible with standard handlebars and seat posts.
Model BH-100-M
・Suitable for 28-35mm diameter.
・Logo printing on the side of the clamp is black.
・Compatible with oversized handlebars and ultra-thick seatposts for small bikes.
There is a gear tooth mechanism inside the holder, and the mounting angle can be changed every 12 degrees.
This makes it possible, for example, to set the bottle close to vertical even on the inclined part of the riser bar.
It can also be deliberately sloped to make it easier to remove the bottle.
The holder is made of rustproof stainless steel.
The clamp body is also made of aluminum to prevent rust.
Includes 2 bolts for mounting the bottle cage.
■About the new quick clamp
Universal type for flexible use without tools.
The stainless steel band used for the BH-95X was a very useful mechanism that could cover 22-35mm with one size, but it was not easy to remove the band when it was not needed because it required some tricks and tools to put it on.
The newly developed quick clamp can be easily installed and removed without tools, allowing you to quickly attach a spare bottle only when needed.
By simply adjusting the bolt at the base of the clamp, the clamp can change its size to accommodate pipes of various diameters.
After that, it can be easily fixed by simply folding the lever.
The S-Clamp covers a range of 22-29mm and can be mounted on a standard 22mm handlebar or 27mm seat post.
It can also be mounted on road drop handlebars with bar tape.
The M-Clamp covers the range 28-35mm and can be mounted at the base of 32mm oversized handlebars or on very thick seat posts of small bikes.
Peringatan
* Harap sesuaikan penjepit cepat terlebih dahulu dengan menyesuaikannya sehingga menjadi gaya penjepit yang tepat dengan sekrup penyetelan dasar, lalu miringkan tuas pengunci. Anda dapat memasang sendiri meskipun Anda mengencangkan sekrup setelah memiringkan lvere tetapi torsi pengencangan yang cukup tidak dapat diperoleh, dan dudukan dapat menggantung selama penggunaan.
* Harap pastikan untuk memeriksa di mana baut penyetel ditarik sepenuhnya ke dalam badan penahan saat menekan tuas dan menjepitnya. Belum bisa menjepit secara aman dengan baut yang mengambang.
* Harap operasikan dengan perut jari Anda alih-alih hanya menggantung di kuku Anda saat menaikkan tuas. Ada kemungkinan paku akan lepas karena tuas ditutup dengan tenaga yang kuat.
* Ada beberapa kasus yang memerlukan pelonggaran baut poros tengah dudukan untuk mengganti sudut sangkar botol. Dimungkinkan untuk menyesuaikan saat memasang untuk sangkar botol MINOURA tetapi juga perlu melepaskan sangkar botol untuk sangkar botol merek lain.
* Di tempat-tempat di mana rem dan kabel pemindah dipasang di sepanjang setang, seperti memuat drop bar, penjepitan dapat menyebabkan tenaga yang berlebihan pada kabel untuk menghancurkan kabel luar. Direkomendasikan untuk memasang sebanyak mungkin untuk menghindari kabel.
* Stang atau tiang jok tidak mungkin dipasang dengan bagian melintang tidak beraturan yang tidak bulat.
* Silahkan anda persiapkan sendiri untuk mengganti orientasi penjepit atau sudut sangkar botol karena alatnya (Kunci segi enam M3) Tidak termasuk. Selain itu, kunci heksagonal alat portabel tidak dapat digunakan karena strukturnya. Harap gunakan kunci pas STD L.
* Perusahaan tidak akan bertanggung jawab atas pencurian peralatan selama parkir karena mudah dipindahkan. Harap keluarkan sendiri saat parkir.
* Tempat botol tidak termasuk.
* Harap pasang BH - 100 dari atas, dan bungkus lembaran transparan yang terpasang di sekitar setang untuk mencegah goresan dan memastikan kekuatan penjepitan yang cukup. *For the quick clamp, first adjust the clamping force with the adjustment screw at the base of the clamp to obtain the appropriate clamping force, and then turn down the locking lever.The holder can be installed by tightening the screw after the lever is turned down, but the tightening torque is not sufficient and the holder may hang down during use.
*Make sure that the adjustment bolt is fully retracted into the holder body when the lever is clamped.If the bolt is still floating, it is not clamped firmly.
*When raising the lever, operate it with your finger, not with your fingernail only.The lever is closed with a strong force, which may injure your fingernail.
*To change the angle of the bottle cage, it is necessary to loosen the bolt on the central axis of the holder.If the bottle cage is made by MINOURA, you can adjust it while it is installed, but if the bottle cage is made by another company, you have to remove the bottle cage.
*On drop bars for road use where the brake and shift wires are installed along the handlebar, the clamp may apply excessive force to the cable and crush the outer cable.It is advisable to avoid the cable as much as possible.
*This product cannot be installed on handlebars or seat posts with a non-circular cross-section.
*The tool (M3 Allen wrench) to change the direction of the clamp and the angle of the bottle cage is not included.A portable Allen wrench cannot be used because of the structure.Use a regular L-wrench.
*We are not responsible for the theft of equipment while parked due to the ease of removal.When you park your bike, please remove it and take it with you.
*Bottle cage is not included.
*To prevent scratches and ensure sufficient clamping force, wrap the supplied transparent sheet around the handlebar and install the BH-100 on top of it.
* Harap pastikan untuk memeriksa di mana baut penyetel ditarik sepenuhnya ke dalam badan penahan saat menekan tuas dan menjepitnya. Belum bisa menjepit secara aman dengan baut yang mengambang.
* Harap operasikan dengan perut jari Anda alih-alih hanya menggantung di kuku Anda saat menaikkan tuas. Ada kemungkinan paku akan lepas karena tuas ditutup dengan tenaga yang kuat.
* Ada beberapa kasus yang memerlukan pelonggaran baut poros tengah dudukan untuk mengganti sudut sangkar botol. Dimungkinkan untuk menyesuaikan saat memasang untuk sangkar botol MINOURA tetapi juga perlu melepaskan sangkar botol untuk sangkar botol merek lain.
* Di tempat-tempat di mana rem dan kabel pemindah dipasang di sepanjang setang, seperti memuat drop bar, penjepitan dapat menyebabkan tenaga yang berlebihan pada kabel untuk menghancurkan kabel luar. Direkomendasikan untuk memasang sebanyak mungkin untuk menghindari kabel.
* Stang atau tiang jok tidak mungkin dipasang dengan bagian melintang tidak beraturan yang tidak bulat.
* Silahkan anda persiapkan sendiri untuk mengganti orientasi penjepit atau sudut sangkar botol karena alatnya (Kunci segi enam M3) Tidak termasuk. Selain itu, kunci heksagonal alat portabel tidak dapat digunakan karena strukturnya. Harap gunakan kunci pas STD L.
* Perusahaan tidak akan bertanggung jawab atas pencurian peralatan selama parkir karena mudah dipindahkan. Harap keluarkan sendiri saat parkir.
* Tempat botol tidak termasuk.
* Harap pasang BH - 100 dari atas, dan bungkus lembaran transparan yang terpasang di sekitar setang untuk mencegah goresan dan memastikan kekuatan penjepitan yang cukup. *For the quick clamp, first adjust the clamping force with the adjustment screw at the base of the clamp to obtain the appropriate clamping force, and then turn down the locking lever.The holder can be installed by tightening the screw after the lever is turned down, but the tightening torque is not sufficient and the holder may hang down during use.
*Make sure that the adjustment bolt is fully retracted into the holder body when the lever is clamped.If the bolt is still floating, it is not clamped firmly.
*When raising the lever, operate it with your finger, not with your fingernail only.The lever is closed with a strong force, which may injure your fingernail.
*To change the angle of the bottle cage, it is necessary to loosen the bolt on the central axis of the holder.If the bottle cage is made by MINOURA, you can adjust it while it is installed, but if the bottle cage is made by another company, you have to remove the bottle cage.
*On drop bars for road use where the brake and shift wires are installed along the handlebar, the clamp may apply excessive force to the cable and crush the outer cable.It is advisable to avoid the cable as much as possible.
*This product cannot be installed on handlebars or seat posts with a non-circular cross-section.
*The tool (M3 Allen wrench) to change the direction of the clamp and the angle of the bottle cage is not included.A portable Allen wrench cannot be used because of the structure.Use a regular L-wrench.
*We are not responsible for the theft of equipment while parked due to the ease of removal.When you park your bike, please remove it and take it with you.
*Bottle cage is not included.
*To prevent scratches and ensure sufficient clamping force, wrap the supplied transparent sheet around the handlebar and install the BH-100 on top of it.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/