- Beranda
- Aksesoris
- Kelistrikan
- Smartphone Case
- GILD design
- GILD design: MOBILE SUIT GUNDAM UC Case Duralumin untuk iPhone 6s/6
MOBILE SUIT GUNDAM UC Case Duralumin untuk iPhone 6s/6
- Nomor produk: 42066
-
- IN STOCK
- Out Stock
- GILD design
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Spesifikasi]
Bahan : A2017S (Tubuh) , Aluminium (Baut)
Ukuran : 71mm (lebar) 143mm (tinggi) 10mm (kedalaman)
Berat badan : 47g
[Daftar Produk]
Tubuh Kasus 1 Set
Kunci Eksklusif 1 pcs.
4 Baut Torx x4pcs. + Spare x1pc.
Elastomer (Peredam Kejut) 10 pcs.
3 Kuda Silikon
Instruksi manual
[Produk yang tersedia secara bersamaan]
Baut Kerah Set
Penutup Jack Earphone
Crystal Armor [Specification]
Material: A2017S (Body), Aluminum (Bolt)
Size: 71mm (W) 143mm (H) 10mm (D)
Body weight: 47g
[Set components]
Case body 1 set
Dedicated wrench 1pc
4 Torx bolts + 1 spare
10 elastomers (shock absorbers)
3 silicon sheets
Instructions
[Existing products that can be used at the same time]
・Collar Bolt Set
・Earphone Jack Cover
・Crystal Armor
Bahan : A2017S (Tubuh) , Aluminium (Baut)
Ukuran : 71mm (lebar) 143mm (tinggi) 10mm (kedalaman)
Berat badan : 47g
[Daftar Produk]
Tubuh Kasus 1 Set
Kunci Eksklusif 1 pcs.
4 Baut Torx x4pcs. + Spare x1pc.
Elastomer (Peredam Kejut) 10 pcs.
3 Kuda Silikon
Instruksi manual
[Produk yang tersedia secara bersamaan]
Baut Kerah Set
Penutup Jack Earphone
Crystal Armor [Specification]
Material: A2017S (Body), Aluminum (Bolt)
Size: 71mm (W) 143mm (H) 10mm (D)
Body weight: 47g
[Set components]
Case body 1 set
Dedicated wrench 1pc
4 Torx bolts + 1 spare
10 elastomers (shock absorbers)
3 silicon sheets
Instructions
[Existing products that can be used at the same time]
・Collar Bolt Set
・Earphone Jack Cover
・Crystal Armor
[Deskripsi]
Ini adalah case untuk iPhone 6 / 6s yang terbuat dari duralumin mesin bekerja sama dengan Mobile Suit Gundam UC ..
Kasingnya terbuat dari duralumin padat yang disebut A2017, yang digunakan untuk suku cadang penerbangan, luar angkasa, dan balap.
Kami menggunakan Duralumin A2017S yang dibuat oleh Furukawa-Sky, yang dikatakan memiliki kualitas terbaik di antara mereka ..
Sudut bemper yang menonjol tidak hanya untuk desain visual, tetapi juga dirancang untuk memiliki ketebalan dinding yang diperlukan untuk meredam guncangan dari keempat sudutnya jika jatuh ..
Keempat sudut ini memainkan peran utama dalam melindungi ponsel cerdas Anda.
Baut heksarobular yang tahan lama digunakan untuk memasang baut ..
Lembaran silikon terbuat dari elastomer khusus yang ideal untuk meredam guncangan.
Lembar ini digunakan untuk dudukan apung untuk melindungi ponsel dari benturan kuat ..
Permukaan diperlakukan dengan film oksida anodik (aluminium anodized) untuk membentuk film keras untuk meningkatkan kekuatan dan daya tahan ..
Melindungi iPhone 6 / 6s Anda dari guncangan eksternal dalam casing yang ringan dan kokoh, dibuat dengan presisi dari duralumin padat.
Diameter bagian pemasangan jack earphone adalah sebesar 8,5 mm ..
Penutup jack earphone yang tersedia secara komersial dan penutup jack earphone Guild Design (nomor model GA-200) dapat dipasang pada waktu yang sama ..
Casing yang kompatibel dengan iPhone 6 / 6s juga menyertakan lubang tali sebagai standar ..
Tali bisa dipasang di sudut kiri bawah sisi depan sehingga tidak menghalangi saat Anda berbicara ..
Ini masuk dengan mulus ke dalam saku Anda ..
Fitur 3D Touch baru pada iPhone 6s menambahkan gerakan tepi tekan baru ..
Tepi tepi dirancang untuk terbuka pada 150 derajat di sepanjang tepi area layar sentuh, sehingga Anda dapat menggunakan tepi tekan dengan casing terpasang ..
(* Harap diperhatikan bahwa pengoperasiannya tidak semudah tanpa casing.. )
[tentang perbedaan antara perak dan poles]
(Gambar perbandingan solid untuk iPhone 6 / 6s)
Poles
Poles (Buffing) permukaan aluminium untuk memberikan hasil akhir yang mengkilap.. Ini memiliki hasil akhir seperti cermin, sehingga objek tercermin dengan jelas dalam gambar ..
Oleh karena itu, sidik jari mudah terlihat dan goresan mudah dibuat ..
Perak
Permukaan aluminium dianodisasi (Anodized) ..
Dengan membuat lapisan tipis di permukaan, permukaan menjadi keras dan tahan gores.. Fitur lain dari produk ini adalah sidik jari tidak terlihat dan tidak mudah melekat pada kotoran .. It is a case for iPhone6/6s made of duralumin in collaboration with Mobile Suit Gundam UC.
The case is made of solid duralumin called A2017, which is used for aviation, space and racing parts.
We use duralumin A2017S made by Furukawa-Sky (UACJ Co., Ltd.), which is said to be the highest quality among them.
The protrusion of the four corners of the bumper is not a mere visual design, but is designed as a necessary wall thickness to absorb the impact from the four corners in the event of a fall.
These four corners play a major role in protecting your smartphone.
The fixing bolts are highly durable Hexaro Buhler bolts.
Silicon sheet is made of special elastomer which is the best for shock absorption.
This sheet is used to protect the smartphone body from strong impacts by making it a floating mount.
The surface is treated with an anodic oxide film (anodized) to form a hard film for strength and durability.
Lightweight and highly rigid case precisely machined from solid duralumin to protect the iPhone6/6s from external shocks.
●The diameter of the earphone jack attachment part is designed to be as large as 8.5mm.
Commercially available earphone jack covers and GILD Design earphone jack covers (Model Number: GA-200) can be installed at the same time.
●The iPhone 6 and 6s cases also come standard with a strap hole.
A strap can be attached to the bottom left of the front so it won't get in the way during calls.
You can put it in your pocket smoothly.
●With the introduction of the new 3D Touch feature, the iPhone 6s adds a new gesture, Edge Press.
The edge press is designed to open 150 degrees along the edge of the effective area of the touch screen, so you can use the edge press even with the case on.
(*The operability is inferior to the state without using the case, please understand.)
[about the difference between silver and polish]
(Comparison image is solid for iPhone6/6s)
● Polished
It is a treatment to make the surface glossy by polishing (buffing) the aluminum ground.The finish is like a mirror, so you can see things clearly.
Therefore, fingerprints are easily visible and scratches are easily made.
● Silver
Anodic oxidation treatment is applied to the surface of aluminum.
By creating a strong film on the surface, the surface becomes hard and scratch-resistant.In addition, it does not show fingerprints and is stain resistant.
Kasingnya terbuat dari duralumin padat yang disebut A2017, yang digunakan untuk suku cadang penerbangan, luar angkasa, dan balap.
Kami menggunakan Duralumin A2017S yang dibuat oleh Furukawa-Sky, yang dikatakan memiliki kualitas terbaik di antara mereka ..
Sudut bemper yang menonjol tidak hanya untuk desain visual, tetapi juga dirancang untuk memiliki ketebalan dinding yang diperlukan untuk meredam guncangan dari keempat sudutnya jika jatuh ..
Keempat sudut ini memainkan peran utama dalam melindungi ponsel cerdas Anda.
Baut heksarobular yang tahan lama digunakan untuk memasang baut ..
Lembaran silikon terbuat dari elastomer khusus yang ideal untuk meredam guncangan.
Lembar ini digunakan untuk dudukan apung untuk melindungi ponsel dari benturan kuat ..
Permukaan diperlakukan dengan film oksida anodik (aluminium anodized) untuk membentuk film keras untuk meningkatkan kekuatan dan daya tahan ..
Melindungi iPhone 6 / 6s Anda dari guncangan eksternal dalam casing yang ringan dan kokoh, dibuat dengan presisi dari duralumin padat.
Diameter bagian pemasangan jack earphone adalah sebesar 8,5 mm ..
Penutup jack earphone yang tersedia secara komersial dan penutup jack earphone Guild Design (nomor model GA-200) dapat dipasang pada waktu yang sama ..
Casing yang kompatibel dengan iPhone 6 / 6s juga menyertakan lubang tali sebagai standar ..
Tali bisa dipasang di sudut kiri bawah sisi depan sehingga tidak menghalangi saat Anda berbicara ..
Ini masuk dengan mulus ke dalam saku Anda ..
Fitur 3D Touch baru pada iPhone 6s menambahkan gerakan tepi tekan baru ..
Tepi tepi dirancang untuk terbuka pada 150 derajat di sepanjang tepi area layar sentuh, sehingga Anda dapat menggunakan tepi tekan dengan casing terpasang ..
(* Harap diperhatikan bahwa pengoperasiannya tidak semudah tanpa casing.. )
[tentang perbedaan antara perak dan poles]
(Gambar perbandingan solid untuk iPhone 6 / 6s)
Poles
Poles (Buffing) permukaan aluminium untuk memberikan hasil akhir yang mengkilap.. Ini memiliki hasil akhir seperti cermin, sehingga objek tercermin dengan jelas dalam gambar ..
Oleh karena itu, sidik jari mudah terlihat dan goresan mudah dibuat ..
Perak
Permukaan aluminium dianodisasi (Anodized) ..
Dengan membuat lapisan tipis di permukaan, permukaan menjadi keras dan tahan gores.. Fitur lain dari produk ini adalah sidik jari tidak terlihat dan tidak mudah melekat pada kotoran .. It is a case for iPhone6/6s made of duralumin in collaboration with Mobile Suit Gundam UC.
The case is made of solid duralumin called A2017, which is used for aviation, space and racing parts.
We use duralumin A2017S made by Furukawa-Sky (UACJ Co., Ltd.), which is said to be the highest quality among them.
The protrusion of the four corners of the bumper is not a mere visual design, but is designed as a necessary wall thickness to absorb the impact from the four corners in the event of a fall.
These four corners play a major role in protecting your smartphone.
The fixing bolts are highly durable Hexaro Buhler bolts.
Silicon sheet is made of special elastomer which is the best for shock absorption.
This sheet is used to protect the smartphone body from strong impacts by making it a floating mount.
The surface is treated with an anodic oxide film (anodized) to form a hard film for strength and durability.
Lightweight and highly rigid case precisely machined from solid duralumin to protect the iPhone6/6s from external shocks.
●The diameter of the earphone jack attachment part is designed to be as large as 8.5mm.
Commercially available earphone jack covers and GILD Design earphone jack covers (Model Number: GA-200) can be installed at the same time.
●The iPhone 6 and 6s cases also come standard with a strap hole.
A strap can be attached to the bottom left of the front so it won't get in the way during calls.
You can put it in your pocket smoothly.
●With the introduction of the new 3D Touch feature, the iPhone 6s adds a new gesture, Edge Press.
The edge press is designed to open 150 degrees along the edge of the effective area of the touch screen, so you can use the edge press even with the case on.
(*The operability is inferior to the state without using the case, please understand.)
[about the difference between silver and polish]
(Comparison image is solid for iPhone6/6s)
● Polished
It is a treatment to make the surface glossy by polishing (buffing) the aluminum ground.The finish is like a mirror, so you can see things clearly.
Therefore, fingerprints are easily visible and scratches are easily made.
● Silver
Anodic oxidation treatment is applied to the surface of aluminum.
By creating a strong film on the surface, the surface becomes hard and scratch-resistant.In addition, it does not show fingerprints and is stain resistant.
Peringatan
* Produk ini dirancang untuk iPhone6 / 6s.
* Gelombang radio memblokir sisi belakang bodi utama karena produk ini terbuat dari aluminium karena karakteristik produk. Ada kemungkinan bahwa kinerja penerima gelombang radio mungkin sedikit lebih rendah.
* Produk ini tidak dibuat untuk tujuan melindungi iPhone sepenuhnya dari benturan, dll.
Berkenaan dengan kerusakan, kerusakan, kehilangan, kehilangan data, kehilangan data dll dari badan utama iPhone, harap dicatat bahwa desain serikat tidak akan bertanggung jawab.
* Produk ini dirancang untuk tidak menyentuh iPhone dan casing dengan plastik penyerap goncangan tetapi tidak dibuat untuk mencegah iPhone sepenuhnya dari goresan.
* Harap diperhatikan bahwa Guild Design tidak akan bertanggung jawab atas goresan pada bodi utama iPhone akibat pemasangan produk ini.
* Ada kasus bahwa spesifikasi produk / penampilan / bagian yang disertakan dapat berubah tanpa pemberitahuan sebelumnya.
* Ada kasus yang tidak mungkin digunakan untuk charger eksternal, earphone (diameter bagian jack earphone 8,5 mm).
* Direkomendasikan ketebalan 0.2mm atau kurang saat memasang film.
* Harap dicatat bahwa ada kemungkinan di mana cacat seperti film mengambang dapat terjadi tergantung pada jenis film luar.
* Di tempat yang kondisi radionya tidak bagus, mungkin akan sulit menerima gelombang radio. Tidak ada masalah ketika menerima gelombang radio normal.
* Sulit untuk menyelesaikan dengan warna yang sama di setiap lot karena karakteristik dari perawatan anodized.
Kami mencoba menyelesaikan dengan warna yang sama sebanyak mungkin tetapi variasi warna akan muncul karena perawatan anodized tergantung banyak.
* Tempat yang disebut kontak yang dilalui arus diberi warna karena produk ini mengalami perlakuan anodisasi. Ada tempat yang tidak memiliki warna dua titik di bagian dalam casing tetapi itu bukan cacat pemrosesan.
* Kami berusaha sedapat mungkin mendekatkan foto produk dengan warna aslinya, tetapi perubahan warna dapat dirasakan oleh monitor komputer pribadi yang Anda gunakan, pengaturan warna, pencahayaan dalam ruangan, sinar matahari, dll. *This product is designed exclusively for iPhone6/6s.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body. There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.
GILD Design is not responsible for any damage to the iPhone, malfunction, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD Design is not responsible for any damage to the iPhone caused by installing this product.
*Product specifications *Appearance *Included items are subject to change without notice.
*You may not be able to use aftermarket chargers or earphones (earphone jack is 8.5mm in diameter).
*We recommend the thickness of the film to be less than 0.2mm.
*Some types of aftermarket film may cause problems such as lifting of the film.
*It may be difficult to receive the signal in the place where the signal condition is not good. If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.
We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored. There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.
* Gelombang radio memblokir sisi belakang bodi utama karena produk ini terbuat dari aluminium karena karakteristik produk. Ada kemungkinan bahwa kinerja penerima gelombang radio mungkin sedikit lebih rendah.
* Produk ini tidak dibuat untuk tujuan melindungi iPhone sepenuhnya dari benturan, dll.
Berkenaan dengan kerusakan, kerusakan, kehilangan, kehilangan data, kehilangan data dll dari badan utama iPhone, harap dicatat bahwa desain serikat tidak akan bertanggung jawab.
* Produk ini dirancang untuk tidak menyentuh iPhone dan casing dengan plastik penyerap goncangan tetapi tidak dibuat untuk mencegah iPhone sepenuhnya dari goresan.
* Harap diperhatikan bahwa Guild Design tidak akan bertanggung jawab atas goresan pada bodi utama iPhone akibat pemasangan produk ini.
* Ada kasus bahwa spesifikasi produk / penampilan / bagian yang disertakan dapat berubah tanpa pemberitahuan sebelumnya.
* Ada kasus yang tidak mungkin digunakan untuk charger eksternal, earphone (diameter bagian jack earphone 8,5 mm).
* Direkomendasikan ketebalan 0.2mm atau kurang saat memasang film.
* Harap dicatat bahwa ada kemungkinan di mana cacat seperti film mengambang dapat terjadi tergantung pada jenis film luar.
* Di tempat yang kondisi radionya tidak bagus, mungkin akan sulit menerima gelombang radio. Tidak ada masalah ketika menerima gelombang radio normal.
* Sulit untuk menyelesaikan dengan warna yang sama di setiap lot karena karakteristik dari perawatan anodized.
Kami mencoba menyelesaikan dengan warna yang sama sebanyak mungkin tetapi variasi warna akan muncul karena perawatan anodized tergantung banyak.
* Tempat yang disebut kontak yang dilalui arus diberi warna karena produk ini mengalami perlakuan anodisasi. Ada tempat yang tidak memiliki warna dua titik di bagian dalam casing tetapi itu bukan cacat pemrosesan.
* Kami berusaha sedapat mungkin mendekatkan foto produk dengan warna aslinya, tetapi perubahan warna dapat dirasakan oleh monitor komputer pribadi yang Anda gunakan, pengaturan warna, pencahayaan dalam ruangan, sinar matahari, dll. *This product is designed exclusively for iPhone6/6s.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body. There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.
GILD Design is not responsible for any damage to the iPhone, malfunction, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD Design is not responsible for any damage to the iPhone caused by installing this product.
*Product specifications *Appearance *Included items are subject to change without notice.
*You may not be able to use aftermarket chargers or earphones (earphone jack is 8.5mm in diameter).
*We recommend the thickness of the film to be less than 0.2mm.
*Some types of aftermarket film may cause problems such as lifting of the film.
*It may be difficult to receive the signal in the place where the signal condition is not good. If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.
We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored. There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/