Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
YZF-R25 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25 15-21 (1WDG) *One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. /*Because
YZF-R25 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (1WD2)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
XVS250(DS250) 00-17 (5KRJ)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KRG)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to ensure a smooth return of the throttle.
XVS250(DS250) 00-17 (5KRF)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KRB)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KRD)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KR7)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KR4)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KR1)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19DB)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19DA)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D9)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D7)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D6)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D8)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D5)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D4)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D3)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D2)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D1)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
VMAX 09-17 (2S3V)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2S3T)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2S37)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2CEU)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
MT-03 16-21 (B1E2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
VMAX 09-17 (2CEK)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2CEF)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
MT-25 16-21 (B1E2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B1E1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B0B2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B0B1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B055)* The grip warmer will not be powered unless the headlight is on, so please operate the controller after starting the engine.
MT-25 16-21 (B051)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B045)*Because the Grip Warmer is not powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B042)*Because the Grip Warmer will not be powered unless the headlight is on, operate the controller after the engine is started.
YZF-R3A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
MT-03 16-21 (B1E1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B0B2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B0B1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B055)* The grip warmer will not be powered unless the headlight is on, so please operate the controller after starting the engine.
MT-03 16-21 (B045)*Because the Grip Warmer is not powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B051)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03
MT-03 16-21 (B042)*Because the Grip Warmer will not be powered unless the headlight is on, operate the controller after the engine is started.
FZ1-S(FZ1 FAZER) 06-14 (3C3W)* Since the controller cannot be installed on the mirror boss, please install it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-S(FZ1 FAZER) 06-14 (3C3G)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill the hole for the lead wire at the installation place.
FZ1-S(FZ1 FAZER) 06-14 (2DV8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement in the installation place.
FZ1-S(FZ1 FAZER) 06-14 (2DV7)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire at the installation place.
FZ1-S(FZ1 FAZER) 06-14 (2DV2)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire at the installation place.
FZ1-S(FZ1 FAZER) 06-14 (1CAV)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement in the installation place.
FZ1-S(FZ1 FAZER) 06-14 (1CAU)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-S(FZ1 FAZER) 06-14 (1CAT)*Because the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement in the installation place.
FZ1-S(FZ1 FAZER) 06-14 (1CAN)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-S(FZ1 FAZER) 06-14 (1CAJ)*Because the controller cannot be installed on the mirror boss, please install it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement at the installation place.
FZ1-N(FZ1) 08-12 2D1A
FZ1-S(FZ1 FAZER) 06-14 (1CA8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-N(FZ1) 08-12 2D1X
FZ1-N(FZ1) 08-12 1EC8
FZ1-N(FZ1) 08-12 1EC7
YZF-R3A 15-21 (1WD2)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3
YZF-R3A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
MT03
YZF-R3A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25A 15-21 (1WDG) *One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. /*Because
YZF-R25A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (1WD2)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
VMAX 09-17 (2CEP)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
YZF-R25 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B029)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B021)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (1WDG) *One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. /*Because
YZF-R3A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Part number OEM] Q5K-YSK-063-Y41
[Deskripsi]
Nyaman dan mudah digenggam di musim dingin!
Didesain khusus untuk kendaraan Yamaha agar mudah dipasang tanpa mengubah kabel kendaraan.
[Ringkasan Produk]
Didesain khusus untuk kendaraan Yamaha agar mudah dipasang tanpa mengubah kabel kendaraan
Pegangan pemanas berdiameter terkecil di dunia
Elemen pemanas baja tahan karat yang memanas secara merata menghasilkan daya tahan tinggi ..
Pengaturan output tombol tekan 3-tahap sederhana: Hi, Mid dan Lo (setiap tingkat keluaran dapat diubah dalam kelipatan 10%)
Penyesuaian otomatis output pemanas sesuai dengan voltase baterai.
Desain andal dengan perlindungan baterai.
Didesain khusus untuk kendaraan Yamaha agar mudah dipasang tanpa mengubah kabel kendaraan.
[Ringkasan Produk]
Didesain khusus untuk kendaraan Yamaha agar mudah dipasang tanpa mengubah kabel kendaraan
Pegangan pemanas berdiameter terkecil di dunia
Elemen pemanas baja tahan karat yang memanas secara merata menghasilkan daya tahan tinggi ..
Pengaturan output tombol tekan 3-tahap sederhana: Hi, Mid dan Lo (setiap tingkat keluaran dapat diubah dalam kelipatan 10%)
Penyesuaian otomatis output pemanas sesuai dengan voltase baterai.
Desain andal dengan perlindungan baterai.
Peringatan
*Harap pastikan Anda memakai sarung tangan ketika menggunakan grip warmer.
*Jangan gunakan grip warmer dengan output tinggi ketika suhu di luar mencapai 20 derajat atau lebih.
*Harap ganti grip dan berhenti gunakan grip warmer jika gripnya telah usang atau rusak.
*R3/25 memerlukan baut secara terpisah untuk bracket pemasangan.
*Untuk R3/25 dan MT-03/25, harap operasikan controller setelah menyalakan mesin.
*Harap siapkan adesif perekat karet khusus ketika menempelkan grip kiri ke stang.
*Jangan gunakan grip warmer dengan output tinggi ketika suhu di luar mencapai 20 derajat atau lebih.
*Harap ganti grip dan berhenti gunakan grip warmer jika gripnya telah usang atau rusak.
*R3/25 memerlukan baut secara terpisah untuk bracket pemasangan.
*Untuk R3/25 dan MT-03/25, harap operasikan controller setelah menyalakan mesin.
*Harap siapkan adesif perekat karet khusus ketika menempelkan grip kiri ke stang.
Model yang Sesuai
YZF-R25 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25 15-21 (1WDG) *One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. /*Because
YZF-R25 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25 15-21 (1WD2)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
XVS250(DS250) 00-17 (5KRJ)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KRG)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to ensure a smooth return of the throttle.
XVS250(DS250) 00-17 (5KRF)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KRB)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KRD)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KR7)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KR4)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (5KR1)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19DB)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19DA)*You may need to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D9)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D7)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D6)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D8)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D5)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D4)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D3)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D2)*You may need to adjust the position of the grip end with a washer (90201-06066) to allow the throttle to return smoothly.
XVS250(DS250) 00-17 (19D1)*It may be necessary to adjust the position of the grip end with the washer (90201-06066) to allow the throttle to return smoothly.
VMAX 09-17 (2S3V)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2S3T)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2S37)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2CEU)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
MT-03 16-21 (B1E2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
VMAX 09-17 (2CEK)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
VMAX 09-17 (2CEF)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
MT-25 16-21 (B1E2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B1E1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B0B2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B0B1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B055)* The grip warmer will not be powered unless the headlight is on, so please operate the controller after starting the engine.
MT-25 16-21 (B051)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B045)*Because the Grip Warmer is not powered unless the headlight is on, please operate the controller after starting the engine.
MT-25 16-21 (B042)*Because the Grip Warmer will not be powered unless the headlight is on, operate the controller after the engine is started.
YZF-R3A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
MT-03 16-21 (B1E1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B0B2)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B0B1)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B055)* The grip warmer will not be powered unless the headlight is on, so please operate the controller after starting the engine.
MT-03 16-21 (B045)*Because the Grip Warmer is not powered unless the headlight is on, please operate the controller after starting the engine.
MT-03 16-21 (B051)*Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the engine.
MT-03
MT-03 16-21 (B042)*Because the Grip Warmer will not be powered unless the headlight is on, operate the controller after the engine is started.
FZ1-S(FZ1 FAZER) 06-14 (3C3W)* Since the controller cannot be installed on the mirror boss, please install it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-S(FZ1 FAZER) 06-14 (3C3G)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill the hole for the lead wire at the installation place.
FZ1-S(FZ1 FAZER) 06-14 (2DV8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement in the installation place.
FZ1-S(FZ1 FAZER) 06-14 (2DV7)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire at the installation place.
FZ1-S(FZ1 FAZER) 06-14 (2DV2)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire at the installation place.
FZ1-S(FZ1 FAZER) 06-14 (1CAV)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement in the installation place.
FZ1-S(FZ1 FAZER) 06-14 (1CAU)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-S(FZ1 FAZER) 06-14 (1CAT)*Because the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement in the installation place.
FZ1-S(FZ1 FAZER) 06-14 (1CAN)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-S(FZ1 FAZER) 06-14 (1CAJ)*Because the controller cannot be installed on the mirror boss, please install it on the handlebar cover or side panel. In that case, it is necessary to make a hole for the lead wire arrangement at the installation place.
FZ1-N(FZ1) 08-12 2D1A
FZ1-S(FZ1 FAZER) 06-14 (1CA8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover or side panel. In this case, it is necessary to drill holes for the lead wires at the installation location.
FZ1-N(FZ1) 08-12 2D1X
FZ1-N(FZ1) 08-12 1EC8
FZ1-N(FZ1) 08-12 1EC7
YZF-R3A 15-21 (1WD2)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3
YZF-R3A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
MT03
YZF-R3A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25A 15-21 (1WDG) *One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. /*Because
YZF-R25A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R25A 15-21 (1WD2)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
VMAX 09-17 (2CEP)*The sub-harness of the grip warmer (the lead wire that connects to the H/L relay) needs to be cut and extended by about 1m.
YZF-R25 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R3A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
YZF-R25 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B029)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (B021)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Because the grip warmer will not be powered unless the headlight is on, please operate the controller after starting the en
YZF-R25 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (1WDG) *One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) is required to install the controller bracket to the mirror boss.
YZF-R3A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. /*Because
YZF-R3A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the bracket for installing the controller to the mirror boss. *Bolt (97027-10014) for installing the controller installation bracket to the mirror boss is required separately. *Because t
Tampilkan lebih banyak