- Beranda
- Motor
- HONDA 126 - 250cc
- NSR250R
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Saklar Stang
- DMR-JAPAN
- DMR-JAPAN: Saklar Stang (Tipe NSR 250)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Panjang harness : 650mm
[Daftar Produk]
Ganti unit
Terminal (untuk Mengubah Panjang Sakelar Harness)
[Termasuk Bagian]
Terminal Coupler Kabel untuk Diproses
Instruksi manual (Peran Warna Kabel) [Product Description]
Handlebar switches: 1 pc.
Terminals: 9 pieces
Joint harnesses: 1 pc.
Relays: 1 pc.
Rubber: 1 pc.
[Daftar Produk]
Ganti unit
Terminal (untuk Mengubah Panjang Sakelar Harness)
[Termasuk Bagian]
Terminal Coupler Kabel untuk Diproses
Instruksi manual (Peran Warna Kabel) [Product Description]
Handlebar switches: 1 pc.
Terminals: 9 pieces
Joint harnesses: 1 pc.
Relays: 1 pc.
Rubber: 1 pc.
[Deskripsi]
Ini untuk NSR250 (MC21 & 18) , tetapi ini adalah sakelar standar untuk pengalihan.
Juga tersedia sebagai produk tujuan umum (modifikasi diperlukan) untuk segala hal mulai dari sepeda mini hingga sepeda besar, seperti monyet dan Kera.
Muncul dengan deskripsi peran kabel ..
Hanya ada beberapa barang bekas yang tersisa, jadi gunakanlah sebagai yang baru!
Sirkuit untuk sakelar adalah MC18 dan panjang harness adalah MC21, yang merupakan kombinasi hibrid dari MC18 dan MC21 ..
Dengan "ide bagus" ini, MC18 dan MC21 dapat digunakan dengan MC18 dan MC21, dan karena lewat ditenagai oleh tenaga baterai, maka dapat digunakan dengan sepeda mini yang biasa digunakan untuk lampu depan bertenaga AC, untuk passing lebih stabil ..
Produk ini diproduksi di sebuah pabrik di Taiwan, di mana sakelar diproduksi untuk produsen suku cadang utama dan produsen sepeda motor.
Anda bisa merasakan perbedaan dalam ketahanan dan ketahanan cuaca karena kami menggunakan bahan terbaik .. DMR-JAPAN original specifications!
Replacement for NSR250R (MC21).
Also a countermeasure for minor trouble!!!
The low beam of the MC21 consumes a large amount of power (70w with 35w x 2 lamps), but since electricity is output directly from the steering wheel switch without using a relay, the load on the HI/LO switch is large and there are minor problems that can easily burn out the switch.
Therefore, as with other Honda 2-light bikes, a relay is installed on the low beam side to protect the steering wheel switch, allowing the use of high wattage bulbs with peace of mind.
The light relay is a stock product of the motorcycle manufacturer.
This is the same standard relay used on the HI side in NSR250R.
This product is manufactured at a factory in Taiwan that manufactures switches for major parts manufacturers and motorcycle manufacturers.
The use of high quality materials allows you to feel the difference in texture, weather resistance, and durability of the resin.
[How to install the Relay KIT]
Remove the coupler from the handlebar switch, insert the relay kit, and ground the green wire.
Secure the relay with a cable tie.
There are two main ways to route the wires, so please refer to the pictures and route the wires freely so that there is no strain on the wires.
The "relay bracket" makes installation easy and smart.
Juga tersedia sebagai produk tujuan umum (modifikasi diperlukan) untuk segala hal mulai dari sepeda mini hingga sepeda besar, seperti monyet dan Kera.
Muncul dengan deskripsi peran kabel ..
Hanya ada beberapa barang bekas yang tersisa, jadi gunakanlah sebagai yang baru!
Sirkuit untuk sakelar adalah MC18 dan panjang harness adalah MC21, yang merupakan kombinasi hibrid dari MC18 dan MC21 ..
Dengan "ide bagus" ini, MC18 dan MC21 dapat digunakan dengan MC18 dan MC21, dan karena lewat ditenagai oleh tenaga baterai, maka dapat digunakan dengan sepeda mini yang biasa digunakan untuk lampu depan bertenaga AC, untuk passing lebih stabil ..
Produk ini diproduksi di sebuah pabrik di Taiwan, di mana sakelar diproduksi untuk produsen suku cadang utama dan produsen sepeda motor.
Anda bisa merasakan perbedaan dalam ketahanan dan ketahanan cuaca karena kami menggunakan bahan terbaik .. DMR-JAPAN original specifications!
Replacement for NSR250R (MC21).
Also a countermeasure for minor trouble!!!
The low beam of the MC21 consumes a large amount of power (70w with 35w x 2 lamps), but since electricity is output directly from the steering wheel switch without using a relay, the load on the HI/LO switch is large and there are minor problems that can easily burn out the switch.
Therefore, as with other Honda 2-light bikes, a relay is installed on the low beam side to protect the steering wheel switch, allowing the use of high wattage bulbs with peace of mind.
The light relay is a stock product of the motorcycle manufacturer.
This is the same standard relay used on the HI side in NSR250R.
This product is manufactured at a factory in Taiwan that manufactures switches for major parts manufacturers and motorcycle manufacturers.
The use of high quality materials allows you to feel the difference in texture, weather resistance, and durability of the resin.
[How to install the Relay KIT]
Remove the coupler from the handlebar switch, insert the relay kit, and ground the green wire.
Secure the relay with a cable tie.
There are two main ways to route the wires, so please refer to the pictures and route the wires freely so that there is no strain on the wires.
The "relay bracket" makes installation easy and smart.
Peringatan
* Harap nyalakan lampu depan saat berkendara di jalan umum.
* Kendaraan yang didaftarkan sebagai kendaraan baru sejak 1 April 1998 tidak dapat dipasang karena fungsi ON / OFF lampu depan melanggar standar keselamatan kendaraan angkutan jalan raya. *When using the DMR main harness, please use the MC18 switch since the harness has already taken measures (when using a relay).
*There may be changes in product specifications due to the manufacturer's reasons.
* Kendaraan yang didaftarkan sebagai kendaraan baru sejak 1 April 1998 tidak dapat dipasang karena fungsi ON / OFF lampu depan melanggar standar keselamatan kendaraan angkutan jalan raya. *When using the DMR main harness, please use the MC18 switch since the harness has already taken measures (when using a relay).
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/