- Beranda
- Motor
- HONDA 401 - 750cc
- CB500X (500X)
- Aksesoris
- Kelistrikan
- Dudukan / Holder Smartphone
- DAYTONA
- DAYTONA: Spacer Klem Conversion Pipa Φ13mm
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Lebar: 18mm, diameter luar: Φ22.2 (atau setara)
Width: 18mm,O.D. :Φ22.2 equivalent
[Deskripsi]
Ini adalah spacer karet yang mengubah batang dengan diameter luar φ13 menjadi setara φ22.2.
Ini sangat ideal untuk memasang dudukan smartphone Daytona, casing smartphone, catu daya USB (lebar komponen penjepit 18 mm) ke dalam bar penjepit sepeda motor off-road.
Ini juga dapat digunakan untuk pipa belakang layar OEM CRF 1000 L Africa Twin.
Produk dengan lebar 18mm menyembunyikan diameter luar pipa dari φ13 → φ22.2.
Ini mengasumsikan pemasangan dudukan pintar Daytona, kasing pintar, catu daya USB (lebar komponen penjepit 18 mm). Rubber spacers that convert Φ13 O.D. bars to Φ22.2 equivalent.
Ideal for attaching Daytona smartphone holders, smartphone cases and USB power supplies (clamp part width 18mm) to off-road motorcycle brace bars.
Also available for CRF1000L Africa Twin stock windshield back pipe.
For products with a width of 18mm, the pipe outer diameter is converted from Φ13 to Φ22.2 equivalent.
It is designed to be used with Daytona smartphone holder, smartphone case and USB power supply (clamp part width 18mm).
Ini sangat ideal untuk memasang dudukan smartphone Daytona, casing smartphone, catu daya USB (lebar komponen penjepit 18 mm) ke dalam bar penjepit sepeda motor off-road.
Ini juga dapat digunakan untuk pipa belakang layar OEM CRF 1000 L Africa Twin.
Produk dengan lebar 18mm menyembunyikan diameter luar pipa dari φ13 → φ22.2.
Ini mengasumsikan pemasangan dudukan pintar Daytona, kasing pintar, catu daya USB (lebar komponen penjepit 18 mm). Rubber spacers that convert Φ13 O.D. bars to Φ22.2 equivalent.
Ideal for attaching Daytona smartphone holders, smartphone cases and USB power supplies (clamp part width 18mm) to off-road motorcycle brace bars.
Also available for CRF1000L Africa Twin stock windshield back pipe.
For products with a width of 18mm, the pipe outer diameter is converted from Φ13 to Φ22.2 equivalent.
It is designed to be used with Daytona smartphone holder, smartphone case and USB power supply (clamp part width 18mm).
Peringatan
*Karena bahan, metode produksi dan perbedaan tiap produk, kualitas produk akhir akan serupa dengan produk yang Anda terima.
*Bagian klem lebih lebar atau sempit dari produk ini tidak bisa dipasang. Bisa menyebabkan produk berotasi (longgar, bergerak, dan lainnya di titik klem) karena getaran dan lainnya *Due to the material, manufacturing method, and individual product differences, the quality of the finished product will be about the same as the product you receive.Please understand there may be a difference in the degree of burr or roughness of the material on the mold mating surface and processing surface.
*Clamp parts that are excessively wider or narrower than this product cannot be assembled.This may result in insufficient holding strength of the pipe, which may cause the assembled object to rotate (loosening, shifting, or wobbling of the clamp fixation) due to vibration while riding.
*Φ13Pipe product assembly parts should be degreased thoroughly beforehand.This product is made of hard rubber material, so the opening of the rubber is hard.If the material is opened forcibly while it is cold, cracks may occur.Please warm it up with a hair dryer beforehand in order to install it on the pipe without difficulty.
*Due to the nature of the material, this product will deteriorate due to ultraviolet rays and rainwater.Periodically check the condition of the rubber (for any cracks or deterioration) and replace it as necessary.
*The DAYTONA logo printed on this product is a silk print for simple identification.Even if the product is new and unused, there are cases where the printed logo is flawed, scuffed, or blurred.
*Bagian klem lebih lebar atau sempit dari produk ini tidak bisa dipasang. Bisa menyebabkan produk berotasi (longgar, bergerak, dan lainnya di titik klem) karena getaran dan lainnya *Due to the material, manufacturing method, and individual product differences, the quality of the finished product will be about the same as the product you receive.Please understand there may be a difference in the degree of burr or roughness of the material on the mold mating surface and processing surface.
*Clamp parts that are excessively wider or narrower than this product cannot be assembled.This may result in insufficient holding strength of the pipe, which may cause the assembled object to rotate (loosening, shifting, or wobbling of the clamp fixation) due to vibration while riding.
*Φ13Pipe product assembly parts should be degreased thoroughly beforehand.This product is made of hard rubber material, so the opening of the rubber is hard.If the material is opened forcibly while it is cold, cracks may occur.Please warm it up with a hair dryer beforehand in order to install it on the pipe without difficulty.
*Due to the nature of the material, this product will deteriorate due to ultraviolet rays and rainwater.Periodically check the condition of the rubber (for any cracks or deterioration) and replace it as necessary.
*The DAYTONA logo printed on this product is a silk print for simple identification.Even if the product is new and unused, there are cases where the printed logo is flawed, scuffed, or blurred.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/