- Beranda
- Motor
- HONDA 251 - 400cc
- CB350 Super Sport
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Gasket Mesin
- BRC
- BRC: Satu Set Gasket Mesin Heavy Duty
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Kuantitas : 1 Set untuk 1 Kendaraan
tanpa Valve Seal Quantity: For 1 vehicle
・No valve seal
tanpa Valve Seal Quantity: For 1 vehicle
・No valve seal
[Deskripsi]
Set Gasket Mesin Bertulang CB350F (Tanpa segel Valve) Berbaris!
Kali ini, kami mengganti semua gasket menjadi gasket hitam yang digunakan dari kendaraan baru saat itu.
Anda bisa melihat sedikit paking dari luar saat dipasang di penutup, tetapi warna hijau paking pabrik saat ini tidak terlihat bagus saat dipasang.
Kami meningkatkan ketebalan penutup kepala sebesar 0,5 mm menjadi 3,5 mm untuk mencegah kebocoran oli bahkan setelah mengganti paking penutup kepala OEM (karet hitam) karena distorsi penutup kepala.
Selain itu, jika Anda membuatnya setebal ini, tidak akan lepas bahkan jika Anda meletakkannya di alur stok dan membaliknya.
Oleh karena itu, tidak perlu menyatukannya, dan mudah dipasang.
Gasket kepala OEM memiliki ketebalan 1mm tetapi kami telah memperkuatnya menjadi 1,6mm untuk mengatasi distorsi penutup kepala.
Empat gasket silinder yang digunakan antara kepala silinder dan silinder adalah gasket OEM yang dapat menyebabkan kebocoran oli jika bukan produk OEM.
Produk BRC dibuat di Jepang dan dapat digunakan dengan percaya diri. CB350F reinforced engine gasket set (without valve seal) is finally available l!
This time, BRC changed all the gaskets to the black gaskets that were used from the time when the vehicle was new.
When the gasket is installed on the cover, you can see the gasket a little bit from the outside, but the current stock green color does not look good when it is installed.
Because there are many bikes which become oil leak even if it changes to a stock head cover gasket (black rubber) because of the distortion of the head cover, BRC strengthened the thickness from stock 3mm to 3.5mm by 0.5mm to prevent the leak completely.
Moreover, with this thickness, it will not come off even if you put it in the stock groove and turn it upside down.
Therefore, it is easy to install because it does not need to be bonded.
The stock head gasket is 1mm thick, but it has been strengthened to 1.6mm thick to accommodate the distortion of the head cover.
The four cylindrical gaskets used between the head and the cylinder are not stock products (aftermarket products), which will cause oil leaks, so BRC use stock products to properly deal with oil leaks.
BRC's products are made in Japan, so you can use them with assurance.
Kali ini, kami mengganti semua gasket menjadi gasket hitam yang digunakan dari kendaraan baru saat itu.
Anda bisa melihat sedikit paking dari luar saat dipasang di penutup, tetapi warna hijau paking pabrik saat ini tidak terlihat bagus saat dipasang.
Kami meningkatkan ketebalan penutup kepala sebesar 0,5 mm menjadi 3,5 mm untuk mencegah kebocoran oli bahkan setelah mengganti paking penutup kepala OEM (karet hitam) karena distorsi penutup kepala.
Selain itu, jika Anda membuatnya setebal ini, tidak akan lepas bahkan jika Anda meletakkannya di alur stok dan membaliknya.
Oleh karena itu, tidak perlu menyatukannya, dan mudah dipasang.
Gasket kepala OEM memiliki ketebalan 1mm tetapi kami telah memperkuatnya menjadi 1,6mm untuk mengatasi distorsi penutup kepala.
Empat gasket silinder yang digunakan antara kepala silinder dan silinder adalah gasket OEM yang dapat menyebabkan kebocoran oli jika bukan produk OEM.
Produk BRC dibuat di Jepang dan dapat digunakan dengan percaya diri. CB350F reinforced engine gasket set (without valve seal) is finally available l!
This time, BRC changed all the gaskets to the black gaskets that were used from the time when the vehicle was new.
When the gasket is installed on the cover, you can see the gasket a little bit from the outside, but the current stock green color does not look good when it is installed.
Because there are many bikes which become oil leak even if it changes to a stock head cover gasket (black rubber) because of the distortion of the head cover, BRC strengthened the thickness from stock 3mm to 3.5mm by 0.5mm to prevent the leak completely.
Moreover, with this thickness, it will not come off even if you put it in the stock groove and turn it upside down.
Therefore, it is easy to install because it does not need to be bonded.
The stock head gasket is 1mm thick, but it has been strengthened to 1.6mm thick to accommodate the distortion of the head cover.
The four cylindrical gaskets used between the head and the cylinder are not stock products (aftermarket products), which will cause oil leaks, so BRC use stock products to properly deal with oil leaks.
BRC's products are made in Japan, so you can use them with assurance.
Peringatan
* Katup uap / segel oli / o-ring bagian bawah tidak termasuk. Perlu membeli secara terpisah jika perlu.
* Semua bagian di atas silinder termasuk dalam tipe O-ring.
* Bagian bawah silinder, segel oli dan 8 segel batang katup tidak termasuk. *Valve stem seal, oil seal, and lower back o-ring are not included.If you need it, please purchase it separately.
*O-rings are included from the cylinder upwards.
*This does not include the area below the cylinder, oil seals or the 8 valve stem seals.
* Semua bagian di atas silinder termasuk dalam tipe O-ring.
* Bagian bawah silinder, segel oli dan 8 segel batang katup tidak termasuk. *Valve stem seal, oil seal, and lower back o-ring are not included.If you need it, please purchase it separately.
*O-rings are included from the cylinder upwards.
*This does not include the area below the cylinder, oil seals or the 8 valve stem seals.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/