- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- W800
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Cover Mesin
- FORK
- FORK: Bevel Gear Cover W
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Kami mereproduksi apa yang disebut penutup roda gigi 窶 弸 penutup 窶? Bevel untuk kendaraan W modern berdasarkan logo klasik dan garis-garis klasik W1SA dan W3 tahun 70-an yang disukai.
Sirip di kedua sisi memiliki jarak yang sama dengan kepala, dan menyatu dengan baik dengan seluruh desain mesin.
Tipe sirip: Dipoles hanya pada bagian cembung.
Kedua latar belakang logo sengaja dibuat tidak rata dalam tekstur, dan menonjolkan garis hitam.
Black Fin Type: Garis rambut pada bagian cembung, cat hitam pada bagian lainnya.
Bagian belakang logo sengaja dibuat tidak rata dan bergaris hitam. The classic logo and lines used on the famous W1SA and W3 "Y-covers" of the 70's have been recreated on a modern W bevel gear cover.
The fins on both sides are evenly spaced with the head and are designed to blend in with the engine as a whole without feeling out of place.
Fin Type: Only convexed part is polished.
The back of the logo on both of them is uneven, and black is added with the line.
Fin Black Type: Hairline finish on the convex part and black paint on the rest.
The back of the logo has an uneven texture, and the lines are black.
Sirip di kedua sisi memiliki jarak yang sama dengan kepala, dan menyatu dengan baik dengan seluruh desain mesin.
Tipe sirip: Dipoles hanya pada bagian cembung.
Kedua latar belakang logo sengaja dibuat tidak rata dalam tekstur, dan menonjolkan garis hitam.
Black Fin Type: Garis rambut pada bagian cembung, cat hitam pada bagian lainnya.
Bagian belakang logo sengaja dibuat tidak rata dan bergaris hitam. The classic logo and lines used on the famous W1SA and W3 "Y-covers" of the 70's have been recreated on a modern W bevel gear cover.
The fins on both sides are evenly spaced with the head and are designed to blend in with the engine as a whole without feeling out of place.
Fin Type: Only convexed part is polished.
The back of the logo on both of them is uneven, and black is added with the line.
Fin Black Type: Hairline finish on the convex part and black paint on the rest.
The back of the logo has an uneven texture, and the lines are black.
Catatan
Peringatan
*Tentang pemasangan di W800 (termasuk street / cafe) setelah 2019.
Bagian berikut diperlukan saat mengganti bevel gear cover setelah tahun 2019.
[Part number OEM Kawasaki]
Pin: 92043-1606
Lembar pelindung panas: 53004-1124 (bukan tidak mungkin untuk mentransplantasikan yang awalnya terpasang ke 800 yang baru, tetapi bentuknya sedikit berbeda)
Baut soket M5 × 14: 92151-1581 × 2 (Baut baru 800 lebih panjang sekitar 4mm dari yang sebelumnya)
-Washer resin: 92022-1023 x 2
*Baut dan lembar pelindung panas tidak termasuk. Harap gunakan produk OEM.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *Installation on 2019 and later W800 (including street / cafe)
If you are replacing a 2019 or later bevel gear cover, you will need the following parts.
[KAWASAKI OEM part number]
・Pin: 92043-1606
*Thermal barrier mat: 53004-1124 (You can transplant the one originally attached to the new 800, but the shape is slightly different)
*Socket bolt M5 x 14: 92151-1581 x 2 (The new 800's are about 4mm longer than the previous ones)
*Plastic washers: 92022-1023 x 2
*Bolts and heat shield sheet are not included.Please use the stock one.
*There may be changes in product specifications due to the manufacturer's reasons.
Bagian berikut diperlukan saat mengganti bevel gear cover setelah tahun 2019.
[Part number OEM Kawasaki]
Pin: 92043-1606
Lembar pelindung panas: 53004-1124 (bukan tidak mungkin untuk mentransplantasikan yang awalnya terpasang ke 800 yang baru, tetapi bentuknya sedikit berbeda)
Baut soket M5 × 14: 92151-1581 × 2 (Baut baru 800 lebih panjang sekitar 4mm dari yang sebelumnya)
-Washer resin: 92022-1023 x 2
*Baut dan lembar pelindung panas tidak termasuk. Harap gunakan produk OEM.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *Installation on 2019 and later W800 (including street / cafe)
If you are replacing a 2019 or later bevel gear cover, you will need the following parts.
[KAWASAKI OEM part number]
・Pin: 92043-1606
*Thermal barrier mat: 53004-1124 (You can transplant the one originally attached to the new 800, but the shape is slightly different)
*Socket bolt M5 x 14: 92151-1581 x 2 (The new 800's are about 4mm longer than the previous ones)
*Plastic washers: 92022-1023 x 2
*Bolts and heat shield sheet are not included.Please use the stock one.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/