- Beranda
- Motor
- YAMAHA 1001cc -
- DRAGSTAR 1100 (XVS1100, V-Star1100)
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Foot Control
- Footstep
- Universal Custom Choppers
- Universal Custom Choppers: Satu Set Footstep Tipe 2
Satu Set Footstep Tipe 2
- Nomor produk: ucc-dsstep
-
- IN STOCK
- Out Stock
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Daftar Produk]
Footpeg
Baut
Kacang
[Ukuran]
•Penyokong
panjangnya : 62mm
Lebar : 24mm
Kira-kira Lebar : 24mm
Bagian Pemasangan Footpeg : Lebar 12mm
• Footpeg
Panjang keseluruhan : 105mm (tanpa Bagian Pemasangan)
DIAMETER : 29mm
Bagian pemasangan : Panjang Keseluruhan 28mm
Bagian pemasangan : Lebar 11mm
[Set components]
・Step
・Bolt
・Nut
[Size]
■Backer
・Vertical: 62mm
・Width: 24mm
・Width approx:24mm
・Step mounting area:Width 12mm
■Step
・Total length: 105mm (not including mounting part)
・Diameter: 29mm
・Mounting area: Total length 28mm
・Mounting area: Width 11mm
Footpeg
Baut
Kacang
[Ukuran]
•Penyokong
panjangnya : 62mm
Lebar : 24mm
Kira-kira Lebar : 24mm
Bagian Pemasangan Footpeg : Lebar 12mm
• Footpeg
Panjang keseluruhan : 105mm (tanpa Bagian Pemasangan)
DIAMETER : 29mm
Bagian pemasangan : Panjang Keseluruhan 28mm
Bagian pemasangan : Lebar 11mm
[Set components]
・Step
・Bolt
・Nut
[Size]
■Backer
・Vertical: 62mm
・Width: 24mm
・Width approx:24mm
・Step mounting area:Width 12mm
■Step
・Total length: 105mm (not including mounting part)
・Diameter: 29mm
・Mounting area: Total length 28mm
・Mounting area: Width 11mm
[Deskripsi]
Badan stepboard biasa tidak tersedia ..
Dengan memasang step backer ini, posisi step akan digerakkan sejauh 4cm ..
Jika menurut Anda dragster agak terlalu besar untuk Anda, atau jika Anda tidak yakin apakah Anda bisa mencapai mid-con, cobalah !.
Suku cadang khusus orisinal yang dapat dipasangi tangga mesin bergaya yang digunakan untuk Harley dan kendaraan lain ..
Langkah normal tidak diperbolehkan ..
Harga pendukungnya sendiri juga masuk akal ..
Kit ini adalah kit pendukung langkah lengkap termasuk tangga, baut dan mur ..
Perubahan posisi menghilangkan banyak sudut miring dragster yang terlalu kecil, terutama jika turun rendah ..
Mudah dipasang.
Ini sukses besar, jadi kita tidak punya banyak stok tersisa!
Lebih cepat lebih baik! The model body of a stock step board is not allowed.
By adding this step backer, the step position is moved by 4cm.
If you think the dragster is a little too far for your legs, or if you don't want to go to the mid-con, please try it.
This is an original special part that makes it possible to install stylish machined steps used on Harleys and other vehicles.
Stock steps are not allowed.
The price of the backer itself is reasonable.
This kit is a full step backer kit including steps, bolts and nuts.
By changing the position, you can get rid of the dragster's too small bank angle, especially if you have it lowered.
Installation is very easy.
We have only a few left in stock for this hit product!
!!
Dengan memasang step backer ini, posisi step akan digerakkan sejauh 4cm ..
Jika menurut Anda dragster agak terlalu besar untuk Anda, atau jika Anda tidak yakin apakah Anda bisa mencapai mid-con, cobalah !.
Suku cadang khusus orisinal yang dapat dipasangi tangga mesin bergaya yang digunakan untuk Harley dan kendaraan lain ..
Langkah normal tidak diperbolehkan ..
Harga pendukungnya sendiri juga masuk akal ..
Kit ini adalah kit pendukung langkah lengkap termasuk tangga, baut dan mur ..
Perubahan posisi menghilangkan banyak sudut miring dragster yang terlalu kecil, terutama jika turun rendah ..
Mudah dipasang.
Ini sukses besar, jadi kita tidak punya banyak stok tersisa!
Lebih cepat lebih baik! The model body of a stock step board is not allowed.
By adding this step backer, the step position is moved by 4cm.
If you think the dragster is a little too far for your legs, or if you don't want to go to the mid-con, please try it.
This is an original special part that makes it possible to install stylish machined steps used on Harleys and other vehicles.
Stock steps are not allowed.
The price of the backer itself is reasonable.
This kit is a full step backer kit including steps, bolts and nuts.
By changing the position, you can get rid of the dragster's too small bank angle, especially if you have it lowered.
Installation is very easy.
We have only a few left in stock for this hit product!
!!
Peringatan
* Harap lepaskan baut OEM di lubang baut di sisi pemasangan bodi kendaraan, dan gunakan suku cadang OEM.
* Harap sesuaikan sedikit tuas setelah pemasangan. *Remove the OEM bolts and use the OEM bolts in the bolt holes on the vehicle body mounting side.
*After installation, the levers should be adjusted slightly.
* Harap sesuaikan sedikit tuas setelah pemasangan. *Remove the OEM bolts and use the OEM bolts in the bolt holes on the vehicle body mounting side.
*After installation, the levers should be adjusted slightly.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/