- Beranda
- Motor
- SUZUKI 251 - 400cc
- GS400
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Tappet Shim
- BRC
- BRC: OEM Tappet Shim (T2.35)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Sesuai Nomor Suku Cadang OEM : 12892-45004
Kuantitas : 1 pc.
Diameter luar : 29,5 mm
ketebalan : 2.35mm Compatible Stock Part Number: 12892-45004
Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.35mm
Kuantitas : 1 pc.
Diameter luar : 29,5 mm
ketebalan : 2.35mm Compatible Stock Part Number: 12892-45004
Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.35mm
[Deskripsi]
Geser ini diperlukan untuk penyetelan tapet engine.
Pelat ini dijual dengan ketebalan 2.15-3.10, namun ketebalan pelapis yang disertakan dengan kendaraan baru awalnya lebih tebal sehingga bisa disesuaikan.
Tersedia dalam shims dari 2.15-2.55, yang biasa digunakan, karena celahnya dapat disesuaikan dengan mengganti shims dengan yang lebih tipis. This product is a shim required when adjusting the tappet of the engine.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
Pelat ini dijual dengan ketebalan 2.15-3.10, namun ketebalan pelapis yang disertakan dengan kendaraan baru awalnya lebih tebal sehingga bisa disesuaikan.
Tersedia dalam shims dari 2.15-2.55, yang biasa digunakan, karena celahnya dapat disesuaikan dengan mengganti shims dengan yang lebih tipis. This product is a shim required when adjusting the tappet of the engine.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
Peringatan
* Selain itu, tidak memungkinkan untuk dipasang karena dapat digunakan kembali karena ganjal yang merupakan bagian pertama mesin juga telah dipanaskan.
* Tentukan ukuran shim setelah pemasangan jarak antara tappet shim dan camshaft ke tanda T dan ukur ketebalan shim yang awalnya masuk dan terapkan nilai numerik jarak klep sebelum menentukannya. Oleh karena itu, diperlukan manual layanan OEM. *The original shims in the engine are also heat-treated so they will not wear out and can be reused.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
* Tentukan ukuran shim setelah pemasangan jarak antara tappet shim dan camshaft ke tanda T dan ukur ketebalan shim yang awalnya masuk dan terapkan nilai numerik jarak klep sebelum menentukannya. Oleh karena itu, diperlukan manual layanan OEM. *The original shims in the engine are also heat-treated so they will not wear out and can be reused.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/