- Beranda
- Motor
- SUZUKI 251 - 400cc
- GS400
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Tappet Shim
- BRC
- BRC: OEM Tappet Shim (T2.45)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Sesuai Nomor Suku Cadang OEM : 12892-45006
Kuantitas : 1 pc.
Diameter luar : 29,5 mm
ketebalan : 2.45mm Compatible Stock Part Number: 12892-45006
Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.45mm
Kuantitas : 1 pc.
Diameter luar : 29,5 mm
ketebalan : 2.45mm Compatible Stock Part Number: 12892-45006
Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.45mm
[Deskripsi]
Geser ini diperlukan untuk penyetelan tapet engine.
Pelat ini dijual dengan ketebalan 2.15-3.10, namun ketebalan pelapis yang disertakan dengan kendaraan baru awalnya lebih tebal sehingga bisa disesuaikan.
Tersedia dalam shims dari 2.15-2.55, yang biasa digunakan, karena celahnya dapat disesuaikan dengan mengganti shims dengan yang lebih tipis.
Shim yang awalnya dipasang di mesin juga diberi heat treatment agar tidak aus dan bisa digunakan kembali.
Untuk menentukan ukuran shim, ukur jarak antara tappet shim dan camshaft ke tanda T, lalu terapkan nilai kelonggaran klep dengan ketebalan shim aslinya.. Oleh karena itu, diperlukan manual layanan OEM. This product is a shim required when adjusting the tappet of the engine.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
The shims that were originally installed in the engine are heat-treated and do not wear out, so they can be reused.
To determine the shim size, measure the gap between the tappet shim and the camshaft at the T mark and apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
Pelat ini dijual dengan ketebalan 2.15-3.10, namun ketebalan pelapis yang disertakan dengan kendaraan baru awalnya lebih tebal sehingga bisa disesuaikan.
Tersedia dalam shims dari 2.15-2.55, yang biasa digunakan, karena celahnya dapat disesuaikan dengan mengganti shims dengan yang lebih tipis.
Shim yang awalnya dipasang di mesin juga diberi heat treatment agar tidak aus dan bisa digunakan kembali.
Untuk menentukan ukuran shim, ukur jarak antara tappet shim dan camshaft ke tanda T, lalu terapkan nilai kelonggaran klep dengan ketebalan shim aslinya.. Oleh karena itu, diperlukan manual layanan OEM. This product is a shim required when adjusting the tappet of the engine.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
The shims that were originally installed in the engine are heat-treated and do not wear out, so they can be reused.
To determine the shim size, measure the gap between the tappet shim and the camshaft at the T mark and apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
Peringatan
*The original shims in the engine are also heat-treated so they will not wear out and can be reused.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*The original shims in the engine are also heat-treated so they will not wear out and can be reused.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*The original shims in the engine are also heat-treated so they will not wear out and can be reused.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/