- Beranda
- Sparepart Motor
- Kelistrikan
- Lampu
- Sparepart Lampu Sein Lainnya
- KELLERMANN
- KELLERMANN: Bohlam Lampu LED 5V-9V untuk Boost Unit i.SED V6
Bohlam Lampu LED 5V-9V untuk Boost Unit i.SED V6
- Nomor produk: KM123-966
-
- IN STOCK
- Out Stock
- KELLERMANN
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Kuantitas : 1 Set 2 lembar.
■Turn signal voltage 5-9V specification bike
2 pcs. per set
2 pcs. per set
[Deskripsi]
Tegangan untuk sinyal belok diatur lebih rendah dari 12V pada kendaraan modern yang seharusnya memiliki sinyal belok LED. Oleh karena itu, saat menggantinya dengan indikator serba guna, mereka tidak menyala secara normal karena voltase tidak mencukupi.. Unit ini akan menyelesaikan masalah itu.. Relai yang beroperasi sebagai respons terhadap lampu indikator dan memungkinkan daya 12V disuplai ke lampu indikator.. Sinyal belok serba guna akan berfungsi dengan baik ..
Jumlah unit yang dibutuhkan tergantung pada kabel kendaraan.. Jika setiap penutup mata terpisah, diperlukan satu penutup untuk setiap penutup mata (2 set per kendaraan).
Jika kanan depan / belakang dan kiri depan / belakang dihubungkan secara paralel, maka dibutuhkan dua set, satu untuk sisi kanan dan satu untuk sisi kiri (satu set diperlukan per kendaraan).
Harap periksa kabel kendaraan Anda sebelum membeli .. The voltage for turn signals is set lower than 12V on recent bikes since it is expected that they will be equipped with LEDs.Therefore, if you replace the turn signals with universal turn signals, they will not light up properly due to insufficient voltage.This unit solves this problem.This is a relay that operates in accordance with the movement of the turn signal, and enables 12V to be supplied.Universal turn signals will now function properly.
The number of units required varies depending on the wiring of the bike.If each turn signal is independent, one is required for each (two sets are required for one bike).
If the right front/rear and left front/rear are connected in parallel, two are required, one for the right side and one for the left side (one set is required for one bike).
Please check the wiring of your bike before purchasing.
Jumlah unit yang dibutuhkan tergantung pada kabel kendaraan.. Jika setiap penutup mata terpisah, diperlukan satu penutup untuk setiap penutup mata (2 set per kendaraan).
Jika kanan depan / belakang dan kiri depan / belakang dihubungkan secara paralel, maka dibutuhkan dua set, satu untuk sisi kanan dan satu untuk sisi kiri (satu set diperlukan per kendaraan).
Harap periksa kabel kendaraan Anda sebelum membeli .. The voltage for turn signals is set lower than 12V on recent bikes since it is expected that they will be equipped with LEDs.Therefore, if you replace the turn signals with universal turn signals, they will not light up properly due to insufficient voltage.This unit solves this problem.This is a relay that operates in accordance with the movement of the turn signal, and enables 12V to be supplied.Universal turn signals will now function properly.
The number of units required varies depending on the wiring of the bike.If each turn signal is independent, one is required for each (two sets are required for one bike).
If the right front/rear and left front/rear are connected in parallel, two are required, one for the right side and one for the left side (one set is required for one bike).
Please check the wiring of your bike before purchasing.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/