Kembali ke atas

【MORIWAKI】Rearset

Harga: IDR 15,276,911

*Termasuk PPN 10%
Webike Points: 152,769 pts

Shipping point: 24.3 pts ( 24.3 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
IDR 27,000

    • Pilih varian produk:
    • Nomor Produk:
    • 05060-201P2-00

Mohon pilih varian produk terlebih dahulu.


Model yang Sesuai:

CB1100 RS 17
Lihat lebih lanjut

Spesifikasi:

[Posisi] (Rasio STD)
・ 0mmUp / 0mmBack
・ 10mmUp / 0mmBack
[Spec.]
ChangePattern: Positive ChangeSpec.
· ABS kompatibel
Lihat lebih lanjut

Produk Terlaris

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Show Original

[Spesifikasi]

[Posisi] (Rasio STD)
・ 0mmUp / 0mmBack
・ 10mmUp / 0mmBack
[Spec.]
ChangePattern: Positive ChangeSpec.
· ABS kompatibel

[Deskripsi]

Posisi yang memanfaatkan baik Merit kekakuan tinggi dan fitur

Set belakang yang sesuai dengan Honda CB 1100 RS / EX ditandai dengan pelat dasar yang dipahat dengan tebal besar menggunakan pemesinan 3 dimensi, kekakuan tinggi pelat dasar ini mengurangi beban yang diberikan oleh Rider, Pada saat yang sama dengan benar menyampaikan ke jalan permukaan, respon dari permukaan jalan dikembalikan ke Linear ke Rider.
Kami juga akan meningkatkan rasa stabilitas pada saat Tandem.
Posisi meninggalkan kebaikan fitur CB 1100 RS / EX, Posisi sama dengan OEM dan 2 poin Posisi 10mm Naik, yang membuat pegangan Knee mudah dilakukan dan meningkatkan perasaan stabilitas.
Footpeg juga mengadopsi desain baru dari Set Belakang untuk CB 1100 RS / EX.

[Catatan]

* Gambar mungkin mengandung pewarnaan lain.

Model yang Sesuai

    • CB1100 RS 17
  • 4.0

    6 Ulasan

  • 5

    Sangat baik

    2

    4

    Baik

    2

    3

    Sedang

    2

    2

    Buruk

    0

    1

    Buruk

    0
  • Tulis Ulasan
  • Rattling

    2017/09/15

    by Japan User(translated)
    Both Pedal and the play are fairly playful, especially concerning the rattling of Brake pedal.I am watching the situation because I am concerned about abrasion if something is done to Aluminum.It was the first time.
  • CBR 600 RR to 15 MODEL

    2016/04/11

    by Japan User(translated)
    The footpeg position is satisfied.However, the notation of Instruction Manual is unkind.1. STDSwitch spring is used, but OEM Spring is shorter than the Instruction Manual Spring notation.2. "Cowl processing" In fact, in fact "Scrap Frame" I mean.I processed Rear Sets and installed it.It is a little disappointing to Moriwaki in the world only.If you attach it to 600 RR 13 - 15 MODEL, a bit of ingenuity is necessary.
  • MORIWAKI Racing Footpeg

    2015/09/27

    by Japan User(translated)
    Matching is perfect enough that it is also attached to MP101.I decided to MORIWAKI because I do not like the footpeg of Heel Guard which I had no meat at the moment.The structure is close to the shape of the OEM's Footpeg Holder and around the Brake master of the Right Side, the Large Outer footpeg can be traced, but it can be installed easily.Position is also versatile so it seems fun to look for a position that suits you. Lol
  • Although the buying motive had been decided by appearance, it received the impression which was first taken in its hand and was seen after arrival, and it is accurate and finishing of components carried out firmly at best moreover dramatically. Actual

    2007/10/09

    by Japan User(translated)
    Although the buying motive had been decided by appearance, it received the impression which was first taken in its hand and was seen after arrival, and it is accurate and finishing of components carried out firmly at best moreover dramatically. Actually attach and it moves. If it sees. A moving part dramatically. It was lost that it is smooth, and a shift also enters with a snap, its reliability increases, touch that the machine is operated is transmitted from a step, and a sheeting position also eats away in front (since !954 a position is [ 954 ] naturally 24 mm of 24-mm back up was past the bottom of pure step position Saki). The appearance of the machine after attachment is like [ in which it adapts itself to 954 too much, and the original manufacturer's product has sense of incongruity ]. Appearance good is carried out, and ! engine-performance good is carried out and it is ! absolute recommendation. I thought that this price was cheap with a product like this.
  • It is a beauty that it is pure to the extent that it does not become a comparison it. [ it ] [ it ] A bolt is not pleased only with one. A bolt is too cheaper although a step is a beauty. A position is the touch set to SS at last, and it becom

    2007/05/18

    by Japan User(translated)
    It is a beauty that it is pure to the extent that it does not become a comparison it. [ it ] [ it ] A bolt is not pleased only with one. A bolt is too cheaper although a step is a beauty. A position is the touch set to SS at last, and it becomes very easy to attack it also at a peak. It becomes a little difficult to take out side stands. If it asks for the ease of taking out, the thing of the type instead of the type which attaches a pedal to a step bar attached to a pure place will think that it is good. Or [ that a stop-lamp switch suffers troubles most although it is attachment ] -- In my case, since the reaction was bad, it took about 30 minutes in this adjustment. The way changed into the hydraulic switch may say a troublesome person. I think that anyone can do it if it does after not getting impatient but reading firmly since the description of others is kind.
6 Ulasan Lihat semua

Produk Teratas

【MORIWAKI】Rear Sets Kit
Rearset MORIWAKI
【OVER RACING】Rear Sets 4 Position
Rearset 4 Posisi OVER RACING
【HURRICANE】Step Bar
Footstep HURRICANE
【HURRICANE】Step Bar Type2
Footstep Tipe 2 HURRICANE
【HURRICANE】Step Bar Type1
Footstep Tipe 1 HURRICANE
【K-FACTORY】Riding Footpeg Base Plate
Base Plate Riding Footpeg K-FACTORY
【OVER RACING】4-position Rear Sets
Rearset 4 Posisi OVER RACING