- Beranda
- Sparepart Motor
- Rangka
- Standar Motor
- TERADA MOTORS
- TERADA MOTORS: Anti Rollover Rod Tipe A (1 Set 10 Pcs)
Anti Rollover Rod Tipe A (1 Set 10 Pcs)
- Nomor produk: TE-01-10
-
- IN STOCK
- Out Stock
- TERADA MOTORS
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Kuantitas : 1 Set 10pcs.
10-piece set
[Deskripsi]
Penyangga samping yang dipasang pada sisi berlawanan dari sepeda untuk mencegah sepeda terjungkal ..
Perlindungan maksimal terhadap gempa bumi, angin topan dan ancaman lainnya pada sepeda motor dari tabrakan dengan pejalan kaki.
Letakkan bodi, yang bisa diatur dengan memutar bagian bawah bodi, pada sisi berlawanan dari penyangga samping ..
Tempatkan badan, sesuaikan dengan panjang optimal, antara badan dan tanah ..
Rangkanya ditopang oleh bagian atas berbentuk U.
Bagian rangka lain bisa digunakan, seperti pipa knalpot, pelindung mesin, dan tangga, selama cukup kuat ..
Bagian bawah bantalan bola dilengkapi dengan plat karet untuk mengurangi kemungkinan rusaknya lantai saat digunakan di dalam ruangan ..
Tentunya plat karet juga dipasang di bagian atas bodi yang bersentuhan dengan motor ..
Ada 4 tipe tubuh tergantung panjang keseluruhan ..
Harap periksa jarak antara bagian tempat pemasangannya dengan tanah dan gunakan panjang yang paling sesuai .. This auxiliary stand is fitted to the side of the side stand to prevent the motorcycle from falling over.
It provides maximum protection against all threats to the motorcycle, including earthquakes, typhoons and contact with passers-by.
Place the main unit, which can be adjusted in length by rotating the bottom, on the opposite side of the side stand.
Please use it by inserting the main body adjusted to the most suitable length between the bike body and the ground.
The upper U-shaped part supports the frame.
It is also possible to use parts other than the frame for installation if the area is strong enough, such as exhaust pipes, engine guards and steps.
The bottom of the spherical bearing is equipped with a rubber plate to reduce the possibility of damaging the floor when used indoors.
Of course, a rubber plate is also attached to the top of the head where it comes into contact with the motorcycle.
There are 4 types of body with different length.
Please confirm the distance between the installable part and the ground, and use the most suitable length.
Perlindungan maksimal terhadap gempa bumi, angin topan dan ancaman lainnya pada sepeda motor dari tabrakan dengan pejalan kaki.
Letakkan bodi, yang bisa diatur dengan memutar bagian bawah bodi, pada sisi berlawanan dari penyangga samping ..
Tempatkan badan, sesuaikan dengan panjang optimal, antara badan dan tanah ..
Rangkanya ditopang oleh bagian atas berbentuk U.
Bagian rangka lain bisa digunakan, seperti pipa knalpot, pelindung mesin, dan tangga, selama cukup kuat ..
Bagian bawah bantalan bola dilengkapi dengan plat karet untuk mengurangi kemungkinan rusaknya lantai saat digunakan di dalam ruangan ..
Tentunya plat karet juga dipasang di bagian atas bodi yang bersentuhan dengan motor ..
Ada 4 tipe tubuh tergantung panjang keseluruhan ..
Harap periksa jarak antara bagian tempat pemasangannya dengan tanah dan gunakan panjang yang paling sesuai .. This auxiliary stand is fitted to the side of the side stand to prevent the motorcycle from falling over.
It provides maximum protection against all threats to the motorcycle, including earthquakes, typhoons and contact with passers-by.
Place the main unit, which can be adjusted in length by rotating the bottom, on the opposite side of the side stand.
Please use it by inserting the main body adjusted to the most suitable length between the bike body and the ground.
The upper U-shaped part supports the frame.
It is also possible to use parts other than the frame for installation if the area is strong enough, such as exhaust pipes, engine guards and steps.
The bottom of the spherical bearing is equipped with a rubber plate to reduce the possibility of damaging the floor when used indoors.
Of course, a rubber plate is also attached to the top of the head where it comes into contact with the motorcycle.
There are 4 types of body with different length.
Please confirm the distance between the installable part and the ground, and use the most suitable length.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Produk ini disetel sebesar 10 pcs.
* Harap pastikan bahwa pipa knalpot dingin saat disangga dengan pipa knalpot.
* Ini adalah panjang dari "Panjang Keseluruhan" ke ujung bawah kepala bagian atas (Titik Kontak Rangka Sepeda Motor). *This product is a set of 10 bottles
*When supporting the exhaust pipe, please make sure that the exhaust pipe is cool.
*"Overall length" is the length from the ground to the top of the tipping bar stop (where it contacts the frame of the motorcycle).
* Harap pastikan bahwa pipa knalpot dingin saat disangga dengan pipa knalpot.
* Ini adalah panjang dari "Panjang Keseluruhan" ke ujung bawah kepala bagian atas (Titik Kontak Rangka Sepeda Motor). *This product is a set of 10 bottles
*When supporting the exhaust pipe, please make sure that the exhaust pipe is cool.
*"Overall length" is the length from the ground to the top of the tipping bar stop (where it contacts the frame of the motorcycle).
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/