Lampu Depan LED Multi Reflector LHL-H10

Nomor produk: 64007-01
- IN STOCK
- Out Stock

PROTEC
|
0.0
(0 ulasan)

Rp3,377,000

*Termasuk PPN 11%

Webike Points: +33,770 Points

Alamat Pengiriman

Mohon pilih varian produk terlebih dahulu.

to DKI Jakarta, Jakarta Selatan, Cilandak

Pilih Alamat

Biaya pengiriman Rp10,000

Cek kupon saya

Jumlah

100% Ori Garansi 7 hr Gratis Cashback Nett Tanpa Biaya Tambahan

Model yang Sesuai

Lihat Semua

CB1100 RS 17-21

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

Spesifikasi:

Tegangan Terukur : DC12V
konsumsi daya : 30w
Korespondensi Inspeksi Kendaraan Jepang
Garansi Produsen 1 tahun

[Deskripsi]

Kit lampu depan yang menjadi multi-reflektor dengan desain yang sudah dikenal hanya dengan mengganti lampu depan LED normal CB1100RS (17 tahun atau lebih) ..
Warna pendaran terhalogenasi 3000 Kelvin dan putih 6000 Kelvin ..

Ini sekitar 3 kali lebih terang dari biasanya dan memenuhi persyaratan pemeriksaan kendaraan!
Sinar Lo dari lampu depan LED stok memancarkan 10,8w pada 10,8w, dan nilai lumennya hampir sama dengan bohlam halogen 55w ..
Mengganti lampu depan dengan lampu depan LED Protec akan meningkatkan kecerahan beberapa kali lipat dan meningkatkan cakupan dan keamanan kendaraan ..
Ini 2,7 kali lebih cerah dalam hal konsumsi daya, tetapi Anda bisa merasakan penampilan yang lebih dari 2,7 kali lebih cerah ..
Tentu saja, sudah siap untuk diperiksa!

Peringatan

* Silakan beli suku cadang OEM secara terpisah untuk lampu kepala. (Sesuai dengan nomor produk lampu depan OEM 33120 - MAZ - 003) *Please purchase the stock headlight separately.(Compatible stock headlight part number: 33120-MAZ-003)
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.

*PROTEC is not responsible for any damage or accident caused by the use of this product.PROTEC will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.

Model yang Sesuai

CB1100 RS 17-21

Link Laman Model

HONDA

CB1100 RS

Lampu Depan LED Multi Reflector LHL-H10

Model yang Sesuai

Rincian Produk

Spesifikasi:

[Deskripsi]

Peringatan

Model yang Sesuai

Link Laman Model

PRODUK YANG JUGA DILIHAT

Produk Siap Dikirim dari Gudang Jepang

Rekomendasi buat Kamu

Best Seller

Produk Teratas

New Custom Article

Gunakan kupon

Review Gambar

Review detail