- Beranda
- Motor
- BMW 1001cc -
- R1200GS
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Jok
- K&H
- K&H: Jok Belakang Original Rally Blue
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Warna]
Puncak : Anti-Slip Hitam
Sisi : Anti-Slip Biru
MENJAHIT : Perak Sedang [Color]
・Top: Non-slip black
・Side: Non-slip blue
・Stitches: Mediam Silver
Puncak : Anti-Slip Hitam
Sisi : Anti-Slip Biru
MENJAHIT : Perak Sedang [Color]
・Top: Non-slip black
・Side: Non-slip blue
・Stitches: Mediam Silver
[Deskripsi]
Berdasarkan [S-3204] jok belakang asli yang sudah ada di jajaran, kami telah menyelesaikan sakelar atas dan depan dalam C-52 non-slip hitam, sisi-sisi dalam C-58 non-slip biru, dan jahitan dalam S-03 perak medium ..
Sabuk tandem adalah standar.. (Kulit: hitam non-slip / Jahitan: perak sedang)
Kemiringan jok disesuaikan dengan stok jok belakang yang diturunkan ke depan ..
Helm pengendara dan penumpang cenderung tidak bertabrakan satu sama lain, karena pengendara dapat tetap di tanah selama akselerasi dan perlambatan ..
Meraih grabber dapat membuat sarung tangan Anda basah saat melakukan tur di tengah hujan, dan tangan Anda menjadi dingin saat cuaca dingin ..
Area tandem belt membuat sarung tangan penumpang tetap kering dan angin tidak langsung bertiup ke dalamnya saat cuaca dingin ..
Mengganti palang pegangan dengan palang pegangan kiri dan kanan memungkinkan penumpang untuk mengubah posisi dengan mudah dan mengurangi beban di bahu dan leher pada tur jarak jauh ..
Ini bukan asli pengganti jok belakang, tapi desain khusus dari alas jok.. Ini adalah pengganti stock jok belakang ..
Melepas jok dilakukan dengan kunci, persis seperti jok belakang aslinya.
Posisi pemasangan depan dan belakang dapat disetel dengan cara yang sama seperti di pabrik .. Based on [S-3204] original rear seat which is already available, C-52 anti-slip black is used for the top and front changeover, C-58 anti-slip blue is used for the sides, and S-03 Mediam silver is used for the stitching.
Pillion belt is standard equipment.(Leather: Non-Slip Black / Stitching: Mediam Silver)
The slope of the seat surface has been adjusted for the stock rear seat which has a forward sloping seat surface.
The helmet of the rider and the passenger will not collide with each other.
If you hold the grab bar, your glove will be wet in rainy weather, and your hand will be cold in cold weather due to the wind.
The passenger's gloves will not get wet if they are near the pillion belt and the wind will not hit them directly in cold weather.
By changing the grab bars, the passenger can easily change their posture and reduce the burden on the shoulders, neck and back during long distance touring.
This is not a reupholstery of the stock rear seat, but a special design from the seat base.It is a replacement of the stock rear seat.
To remove the seat, use the same key as the stock rear seat.
The front and rear mounting position adjustment mechanism is the same as stock.
Sabuk tandem adalah standar.. (Kulit: hitam non-slip / Jahitan: perak sedang)
Kemiringan jok disesuaikan dengan stok jok belakang yang diturunkan ke depan ..
Helm pengendara dan penumpang cenderung tidak bertabrakan satu sama lain, karena pengendara dapat tetap di tanah selama akselerasi dan perlambatan ..
Meraih grabber dapat membuat sarung tangan Anda basah saat melakukan tur di tengah hujan, dan tangan Anda menjadi dingin saat cuaca dingin ..
Area tandem belt membuat sarung tangan penumpang tetap kering dan angin tidak langsung bertiup ke dalamnya saat cuaca dingin ..
Mengganti palang pegangan dengan palang pegangan kiri dan kanan memungkinkan penumpang untuk mengubah posisi dengan mudah dan mengurangi beban di bahu dan leher pada tur jarak jauh ..
Ini bukan asli pengganti jok belakang, tapi desain khusus dari alas jok.. Ini adalah pengganti stock jok belakang ..
Melepas jok dilakukan dengan kunci, persis seperti jok belakang aslinya.
Posisi pemasangan depan dan belakang dapat disetel dengan cara yang sama seperti di pabrik .. Based on [S-3204] original rear seat which is already available, C-52 anti-slip black is used for the top and front changeover, C-58 anti-slip blue is used for the sides, and S-03 Mediam silver is used for the stitching.
Pillion belt is standard equipment.(Leather: Non-Slip Black / Stitching: Mediam Silver)
The slope of the seat surface has been adjusted for the stock rear seat which has a forward sloping seat surface.
The helmet of the rider and the passenger will not collide with each other.
If you hold the grab bar, your glove will be wet in rainy weather, and your hand will be cold in cold weather due to the wind.
The passenger's gloves will not get wet if they are near the pillion belt and the wind will not hit them directly in cold weather.
By changing the grab bars, the passenger can easily change their posture and reduce the burden on the shoulders, neck and back during long distance touring.
This is not a reupholstery of the stock rear seat, but a special design from the seat base.It is a replacement of the stock rear seat.
To remove the seat, use the same key as the stock rear seat.
The front and rear mounting position adjustment mechanism is the same as stock.
Peringatan
* Tidak mungkin memasang alat OEM ke alas kursi.
*Installation of stock tools on the seat base cannot be done.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/