Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Warna : Hitam Bahan : Aluminium Powder Coating, Stainless Steel, Plastik Kekuatan Tinggi Ukuran Bola : 1 inci
[Mountable Range] X Grip : Lebar Sekitar 44mm-114mm, Tebal hingga 22mm Basis Mount Bar : Φ19-Φ25.4mm Korespondensi
[Daftar Produk] untuk X Grip Tablet Lengan STD Basis Mount Bar Menambatkan
[Spesifikasi] Untuk Smartphone pengolahan : Tanpa
Type: X-Grip & Bar Mount Base (M) Color: Black Size: 1 inch ball Weight [grams]: 354g Material [Material]: Marine-grade aluminum, high strength composite, stainless steel Compatibility: Width of fitting 44.4-114.3mm, Thickness -22.2mm Diameter of mounting point Φ19-25.4mm Where Used: Handlebar (Milibar/Inch bar), round pipe Quantity: 1 pc. Components: Tether band, rubber cap adhesive, #10-24 x 1inch cap bolt, #10-24 Nylock nut.75inch spacer, .9inch spacer, 88.9mm rubber strip, 5/32inch hex wrench
[Deskripsi]
Ideal untuk digunakan dengan Stang Pipa Sepeda Motor. Basis yang stylish dan berkekuatan tinggi dikombinasikan dengan Quantity: Set. Jumlah batang Dudukan dasar Φ19-Φ25.4mm dan XGrip: Set. MountQuantity: Setel agar stang pipa dapat dipasang Fa-Brett. Stang tersedia untuk bar Millibar dan Inch.
Compatible with millimeter & inch bar handles. Mounting diameters from Φ19.05mm -Φ25.4mm.
Bar Mount BaseΦ19-Φ25.4mm and X-Grip Set. A mounting set that makes it possible to mount the phablet on the bar handle. Bar mount base Compatible diameters Φ19-Φ25.4. The handlebars are compatible with both millimeter and inch bars. For installation, a clearance of at least 10mm is required on the lower side of the clamp. X-grip: It can be mounted up to approximately 44mm-114mm in width and 22mm in thickness. For smartphones. Please fix your smartphone with the attached tether (rubber band) to prevent it from falling off.
Peringatan
* Jangan mengoperasikan peralatan ramount saat mengendarai sepeda. Ada kemungkinan merusak perangkat elektronik (mis. smartphone, sistem navigasi, dll.) karena getaran saat sepeda dipasang di ramount. (Silakan gunakan dengan risiko Anda sendiri.) * Diperlukan jarak minimum 10mm di sisi bawah penjepit untuk pemasangan. * Harap perbaiki smartphone dengan tambatan yang terpasang (gelang karet) untuk mencegahnya jatuh. * Ada perbedaan individual dalam kualitas cat dan pelapis antar produk.
*At least 10mm clearance is required at the bottom side of the clamp for installation. *Please secure the phablet phone with the attached tether (rubber band) to prevent it from falling out. *Fix the mounted device with the attached tether band to prevent it from falling off. *Do not operate or adjust the mounting object or the ram mount product while riding, as it is dangerous. *We will not compensate for any damage caused by vibration or removal of the product during or after installation, or for any trouble caused by installation method or combination of parts without any defect in the Ram Mount product. *In order to prevent unexpected breakage of parts, malfunctions, or accidental damage caused by deterioration of materials (including rust) due to use environment, aging, or wear and tear, always inspect the product before use and discontinue use or replace the product with a new one if any abnormality is found. *There may be changes in product specifications due to the manufacturer's reasons.
