- Beranda
- Motor
- KAWASAKI 126 - 250cc
- NINJA250 (EX250)
- Sparepart Motor
- Kelistrikan
- Switch / Harness
- Kabel Lainnya
- SUS441
- SUS441: Kabel Harness Sensor Tekanan Intake [L]
Kabel Harness Sensor Tekanan Intake [L]
- Nomor produk: NJ-004
-
- IN STOCK
- Out Stock
- SUS441
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Ini adalah "sub-harness ekstensi" untuk dihubungkan ke harness utama yang panjangnya tidak akan cukup saat sensor tekanan udara masuk dipindahkan ..
Ini adalah sub-harness untuk memperpanjang panjang sensor.. Tergantung pada model tahun ..
Dengan menggerakkan sensor tekanan masuk lebih dekat ke mesin, item ini meningkatkan respons throttle dan memetakan respons ..
Item ini meningkatkan respons throttle dengan memperpendek panjang selang sensor tekanan masuk respons lambat stok dan memindahkannya lebih dekat ke mesin ..
Ini adalah sub-harness untuk dihubungkan ke harness utama yang panjangnya tidak akan cukup saat sensor tekanan udara masuk dipindahkan ..
R25, RR, dan Ninja baru adalah sensor tekanan udara masuk "throttle body-mount", tetapi karena Ninja pada awalnya dikembangkan sebagai "sepeda touring", suku cadang ini dibuat menjadi "tumpul" ..
Untuk balapan, ini adalah item yang harus dimiliki untuk respon throttle yang lebih cepat ..
Ini mengubah NINJA250 yang sedikit membosankan menjadi sepeda yang berorientasi pada balapan seperti YZF-R25 atau CBR250RR .. This is an extension sub-harness to connect to the main harness that is not long enough for the intake pressure sensor.
This is a "sub-harness for extension" of the sensor whose length is insufficient due to short circuit.Depends on the model year.
This item improves the throttle response and map response by moving the intake air pressure sensor closer to the engine side.
This item improves the throttle response by shortening the stock intake pressure sensor hose which is slow to respond.
This is a sub-harness to connect to the main harness which is not long enough for the intake pressure sensor.
The R25, RR and the new Ninja have intake pressure sensors that are directly attached to the throttle body, but the Ninja was originally developed as a touring bike, so these parts are set to be dull.
This is a necessary item to make the throttle response quicker for racing.
It is the item that transforms NINJA250, which is set a little bit dull as a touring bike, into the bike suitable for racing like YZF-R25 or CBR250RR.
Ini adalah sub-harness untuk memperpanjang panjang sensor.. Tergantung pada model tahun ..
Dengan menggerakkan sensor tekanan masuk lebih dekat ke mesin, item ini meningkatkan respons throttle dan memetakan respons ..
Item ini meningkatkan respons throttle dengan memperpendek panjang selang sensor tekanan masuk respons lambat stok dan memindahkannya lebih dekat ke mesin ..
Ini adalah sub-harness untuk dihubungkan ke harness utama yang panjangnya tidak akan cukup saat sensor tekanan udara masuk dipindahkan ..
R25, RR, dan Ninja baru adalah sensor tekanan udara masuk "throttle body-mount", tetapi karena Ninja pada awalnya dikembangkan sebagai "sepeda touring", suku cadang ini dibuat menjadi "tumpul" ..
Untuk balapan, ini adalah item yang harus dimiliki untuk respon throttle yang lebih cepat ..
Ini mengubah NINJA250 yang sedikit membosankan menjadi sepeda yang berorientasi pada balapan seperti YZF-R25 atau CBR250RR .. This is an extension sub-harness to connect to the main harness that is not long enough for the intake pressure sensor.
This is a "sub-harness for extension" of the sensor whose length is insufficient due to short circuit.Depends on the model year.
This item improves the throttle response and map response by moving the intake air pressure sensor closer to the engine side.
This item improves the throttle response by shortening the stock intake pressure sensor hose which is slow to respond.
This is a sub-harness to connect to the main harness which is not long enough for the intake pressure sensor.
The R25, RR and the new Ninja have intake pressure sensors that are directly attached to the throttle body, but the Ninja was originally developed as a touring bike, so these parts are set to be dull.
This is a necessary item to make the throttle response quicker for racing.
It is the item that transforms NINJA250, which is set a little bit dull as a touring bike, into the bike suitable for racing like YZF-R25 or CBR250RR.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/