- Beranda
- Motor
- HONDA 401 - 750cc
- Rebel 500
- Sparepart Motor
- Sparepart Stang & Kemudi
- Stang
- DAYTONA
- DAYTONA: Stang 40B Inner Weight 145
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Diameter luar stang] Φ25.4
[Lebar stang] 710mm
[Bahan] Stainless Steel (STKMT Steel)
[Warna] Black
[Posisi] Lebih mundur 40mm /Lebih ramping 20mm
[Inner Weight] 145g (satu sisi)
[Handlebar Outer Diameter] Φ25.4
[Handlebar Width] 710mm
[Material] Stainless Steel (STKMT Steel)
[Color] Black
[Position] 40mm Back/20mm Narrow
[Inner Weight] 145g (one side)
[Lebar stang] 710mm
[Bahan] Stainless Steel (STKMT Steel)
[Warna] Black
[Posisi] Lebih mundur 40mm /Lebih ramping 20mm
[Inner Weight] 145g (satu sisi)
[Handlebar Outer Diameter] Φ25.4
[Handlebar Width] 710mm
[Material] Stainless Steel (STKMT Steel)
[Color] Black
[Position] 40mm Back/20mm Narrow
[Inner Weight] 145g (one side)
[Deskripsi]
Inner weight mengurangi getaran tidak nyaman yang ditransmisikan ke stang.
Lebih mundur 40mm dibandingkan stang bawaan sehingga orang dengan postur tubuh kecil dapat berkendara secara lebih nyaman.
Bagian ujungnya memiliki lubang sekrup 6 mm sehingga Anda dapat memasang jalu stang dan spion jalu stang dengan mengombinasikannya beserta grip dan selongsong gas.
Desain bolt-on yang tidak memerlukan penggantian kabel, selang rem, kabel harness, dan lainnya.
Inner weight reduces unpleasant vibrations transmitted to the handlebar.
It has pullback for 40 mm compared to genuine handlebar, so a small person can ride more comfortably
Since the end part has been machined with 6 mm screw holes, it is possible to customize bar ends and bar end mirrors by combining end penetration type grips and throttle sleeves.
Bolt-on design that does not require replacement of cables, brake hoses, harnesses, etc.
Lebih mundur 40mm dibandingkan stang bawaan sehingga orang dengan postur tubuh kecil dapat berkendara secara lebih nyaman.
Bagian ujungnya memiliki lubang sekrup 6 mm sehingga Anda dapat memasang jalu stang dan spion jalu stang dengan mengombinasikannya beserta grip dan selongsong gas.
Desain bolt-on yang tidak memerlukan penggantian kabel, selang rem, kabel harness, dan lainnya.
Inner weight reduces unpleasant vibrations transmitted to the handlebar.
It has pullback for 40 mm compared to genuine handlebar, so a small person can ride more comfortably
Since the end part has been machined with 6 mm screw holes, it is possible to customize bar ends and bar end mirrors by combining end penetration type grips and throttle sleeves.
Bolt-on design that does not require replacement of cables, brake hoses, harnesses, etc.
Peringatan
*Harap pastikan stang, saklar dan lainnya tidak menyentuh tangki bahan bakar dan pastikan selang rem dan kabel lainnya tidak dipasang terlalu kencang.
*During the installation process, be sure to move the handlebars carefully to the right and left limits while temporarily mounted, and check that the handlebars, control switches, etc. do not come in contact with the fuel tank, and that the brake hoses, wiring harnesses, etc. are not too taut.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/