- Beranda
- Sparepart Motor
- Kelistrikan
- Lampu
- Sparepart Resistor Lampu Sein Lainnya
- KELLERMANN
- KELLERMANN: Universal Resistor i.BOS-CL1
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Spesifikasi Sinyal Giliran LED CANBUS (Belakang)
For LED turn signal specification with CANBUS (rear)
[Deskripsi]
[Di kendaraan Harley]
Jika kendaraan Anda dilengkapi CANBUS, Anda dapat mengganti ke lampu indikator LED seperti biasa.. Satu-satunya hal adalah indikator pada pengukur berada dalam status fula tinggi ..
Selain indikator Kellermann, lampu belakang / rem (termasuk seri DF dalam satu unit) pada kendaraan yang dilengkapi CANBUS untuk mencegah indikator meteran terbalik.
Jika Anda khawatir tentang hula indikator yang tinggi, ini adalah tempat yang tepat untuk memulai ..
[Untuk kendaraan lain]
Digunakan saat memasang indikator Kellermann plus lampu belakang / lampu rem (termasuk seri DF dalam satu unit). The wiring of the i.BOS CL1 in gray/white should not be connected initially. Only connect it if normal operation is not achieved.(This wiring is for bikes with a taillight status check function on the vehicle.)
[For Harley bikes]
If your bike is equipped with CANBUS, the turn signals will light up as usual even if you change to LED turn signals.
However, the indicator on the meter will be in a high-flux state.
This resistor is necessary for Kellermann turn signal lights plus tail/brake lights (including the DF series combined into one) that are installed on bikes with CANBUS to prevent high-flux of the meter indicators.
It is recommended for those who are concerned about the high-flux of the indicator.
This product can be used for bikes with 12V LEDs in the stock turn signal (stock LED → Kellermann LED).
If the stock turn signal has halogen bulbs, please use the resistor for halogen specification even if your bike is equipped with CANBUS.
[For other bikes]
This product can be used for bikes with stock turn signal with 12V 2W LED (stock LED → Kellermann LED).
For use with Kellermann turn signals plus taillights / brake lights (including the DF series combined into one).
If the stock turn signal has halogen bulbs, please use the resistor for halogen specification even if your bike is equipped with CANBUS.
Jika kendaraan Anda dilengkapi CANBUS, Anda dapat mengganti ke lampu indikator LED seperti biasa.. Satu-satunya hal adalah indikator pada pengukur berada dalam status fula tinggi ..
Selain indikator Kellermann, lampu belakang / rem (termasuk seri DF dalam satu unit) pada kendaraan yang dilengkapi CANBUS untuk mencegah indikator meteran terbalik.
Jika Anda khawatir tentang hula indikator yang tinggi, ini adalah tempat yang tepat untuk memulai ..
[Untuk kendaraan lain]
Digunakan saat memasang indikator Kellermann plus lampu belakang / lampu rem (termasuk seri DF dalam satu unit). The wiring of the i.BOS CL1 in gray/white should not be connected initially. Only connect it if normal operation is not achieved.(This wiring is for bikes with a taillight status check function on the vehicle.)
[For Harley bikes]
If your bike is equipped with CANBUS, the turn signals will light up as usual even if you change to LED turn signals.
However, the indicator on the meter will be in a high-flux state.
This resistor is necessary for Kellermann turn signal lights plus tail/brake lights (including the DF series combined into one) that are installed on bikes with CANBUS to prevent high-flux of the meter indicators.
It is recommended for those who are concerned about the high-flux of the indicator.
This product can be used for bikes with 12V LEDs in the stock turn signal (stock LED → Kellermann LED).
If the stock turn signal has halogen bulbs, please use the resistor for halogen specification even if your bike is equipped with CANBUS.
[For other bikes]
This product can be used for bikes with stock turn signal with 12V 2W LED (stock LED → Kellermann LED).
For use with Kellermann turn signals plus taillights / brake lights (including the DF series combined into one).
If the stock turn signal has halogen bulbs, please use the resistor for halogen specification even if your bike is equipped with CANBUS.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Dapat digunakan untuk kendaraan dengan lampu sein OEM LED 12V (LED OEM → LED Kellermann).
* Harap gunakan register untuk spesifikasi halogen bahkan di dalam mobil dengan CANBUS jika lampu sein OEM adalah bohlam halogen.
* Dibutuhkan 1 buah untuk setiap kendaraan.
* Jika Anda juga ingin mengganti bagian depan, silakan beli dua register terpisah untuk spesifikasi halogen jika lampu sein depan OEM adalah bohlam halogen dan satu KM123-940 untuk spesifikasi LED. *This product can be used for bikes with 12V LED indicators (stock LED → Kellermann LED).
*If your stock blinkers are halogen bulbs, please use the register for halogen specification even if your bike is equipped with CANBUS.
*One is required for each bike.
*If you want to replace the front blinker, please purchase 2 pieces of Halogen Resistor or 1 piece of KM123-940 if you use LED.
*This product is a universal product (for 12V plus control specification bikes).Depending on bike specifications, conditions, and individual differences, the product may not be compatible and may require modification or addition of parts, or may not be able to be installed.
*The actual product may differ in some colors and shapes due to improvements and specification changes.
*For the convenience of photography, other products may also appear in the image, but only the item in the title will be delivered.
*There may be changes in product specifications due to the manufacturer's reasons.
* Harap gunakan register untuk spesifikasi halogen bahkan di dalam mobil dengan CANBUS jika lampu sein OEM adalah bohlam halogen.
* Dibutuhkan 1 buah untuk setiap kendaraan.
* Jika Anda juga ingin mengganti bagian depan, silakan beli dua register terpisah untuk spesifikasi halogen jika lampu sein depan OEM adalah bohlam halogen dan satu KM123-940 untuk spesifikasi LED. *This product can be used for bikes with 12V LED indicators (stock LED → Kellermann LED).
*If your stock blinkers are halogen bulbs, please use the register for halogen specification even if your bike is equipped with CANBUS.
*One is required for each bike.
*If you want to replace the front blinker, please purchase 2 pieces of Halogen Resistor or 1 piece of KM123-940 if you use LED.
*This product is a universal product (for 12V plus control specification bikes).Depending on bike specifications, conditions, and individual differences, the product may not be compatible and may require modification or addition of parts, or may not be able to be installed.
*The actual product may differ in some colors and shapes due to improvements and specification changes.
*For the convenience of photography, other products may also appear in the image, but only the item in the title will be delivered.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/