- Beranda
- Motor
- YAMAHA 251 - 400cc
- X-MAX 400
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Depan
- Puig
- Puig: Sambungan Spakbor Depan
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Untuk depan
Warna: Black
Bahan: ABS resin For Front
Color: Black
Material: ABS resin
Warna: Black
Bahan: ABS resin For Front
Color: Black
Material: ABS resin
[Deskripsi]
Dengan memanjangkan bagian belakang spatbor depan, ini mengurangi percikan lumpur dan lumpur yang menggulung ban depan dan berkontribusi pada perlindungan radiator, pipa knalpot, dll.
By extending the rear end of the stock front fender, it will reduce flying rocks, mud splashes, etc. which are caused by the front tires, and contribute to the protection of the radiator, exhaust pipe, etc.
Peringatan
*Pemasangan dilakukan dengan double tape dan push rivet (atau tapping screw tergantung dari motornya) sehingga perlu pengeboran lubang pada spakbor.
*Harap gunakan air dan cairan pembersih yang netral untuk membersihkan dan merawat produk. Kontak dengan cairan kimia keras termasuk alkali/cairan asam dapat menyebabkan keretakan atau pengerasan sehingga membuat produk cepat rusak. *Installation is done with the included double-sided tape and push rivets (or tapping screws depending on the vehicle), so drilling holes in the fender is required.
*This product will be installed by extending the stock fender, so if there is any damage to the stock fender, it may be damaged.
*Please use tap water and neutral detergent to clean and maintain the product.Contact with highly aggressive chemicals, including alkali / acidic liquids, may cause cracking and hardening, and shorten the life of the product.
*Harap gunakan air dan cairan pembersih yang netral untuk membersihkan dan merawat produk. Kontak dengan cairan kimia keras termasuk alkali/cairan asam dapat menyebabkan keretakan atau pengerasan sehingga membuat produk cepat rusak. *Installation is done with the included double-sided tape and push rivets (or tapping screws depending on the vehicle), so drilling holes in the fender is required.
*This product will be installed by extending the stock fender, so if there is any damage to the stock fender, it may be damaged.
*Please use tap water and neutral detergent to clean and maintain the product.Contact with highly aggressive chemicals, including alkali / acidic liquids, may cause cracking and hardening, and shorten the life of the product.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/