- Beranda
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Penghangat Stang
- EFFEX
- EFFEX: Saklar Grip Heater Tipe Terpisah
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Korespondensi]
Diameter stang : Φ22.2
Diameter Luar Pegangan : Φ33
Panjang Pegangan Sesuai : 115/120 / 130mm
untuk Kendaraan 12V
[Termasuk Bagian] Heat shrink tubing untuk perlindungan pegangan
[Compatibility]
・Handle Diameter: Φ22.2
・Grip outer diameter: Φ33
・Compatible grip length: 115 / 120 / 130mm
・Exclusive for 12V vehicles
[Components] Heat-shrinkable tube for grip protection
Diameter stang : Φ22.2
Diameter Luar Pegangan : Φ33
Panjang Pegangan Sesuai : 115/120 / 130mm
untuk Kendaraan 12V
[Termasuk Bagian] Heat shrink tubing untuk perlindungan pegangan
[Compatibility]
・Handle Diameter: Φ22.2
・Grip outer diameter: Φ33
・Compatible grip length: 115 / 120 / 130mm
・Exclusive for 12V vehicles
[Components] Heat-shrinkable tube for grip protection
[Deskripsi]
[Karakteristik Produk]
Lima kontrol suhu berbeda dalam sakelar kompak. Lima kontrol suhu berbeda ditunjukkan oleh lima lampu LED berwarna berbeda.
Panjang pegangan dapat disesuaikan menjadi 115/120 / 130mm dengan 3 ukuran yang berbeda dari ExtendSleeve.
Tutup ujung batang yang dapat dilepas untuk kedua jenis ujung batang dan ujung tertutup ..
GripDesign untuk penanganan yang andal dan konduktivitas termal.
Diameter Grip terkecil sekecil 33mm, jadi Anda bisa menggantinya dengan Grip normal dan tetap memiliki pegangan yang nyaman ..
Kawat Nichrome dililitkan sepenuhnya di sekeliling spek untuk menghangatkan seluruh telapak ...
Lima tingkat kontrol suhu dan konsumsi daya. * Temperatur pada 25 derajat Celcius, tidak ada angin dan 13,5 V.. Suhu mungkin lebih rendah dari nilai yang terukur karena pembuangan panas ke Handlebar, Bar End dan Sarung Tangan dan pendinginan oleh angin yang bertiup ..
Fungsi penekan tegangan memungkinkan ketenangan pikiran bahkan pada tegangan rendah.
Secara otomatis menghentikan pemanasan saat tegangan turun di bawah 11.5V dan memulai kembali secara otomatis saat tegangan pulih.
Heat Shrink GripProtective Tube disertakan!. Potong Gagang sesuai panjang, pasang pada Gagang dan panaskan menyusut dengan senapan panas ..
[Product Features]
・5-step temperature control with a compact switch.The 5-step temperature control is indicated by a 5-color LED lamp.
・The grip length can be adjusted to 115 / 120 / 130mm with 3 sizes of extended sleeves.
・The removable bar end cap is compatible with both bar end type and non-through type.
・Grip design for reliable maneuverability and thermal conductivity.
・The smallest diameter Φ33 provides a comfortable grip even if it is replaced with a regular grip.
・The nichrome wire is wound around the entire circumference of the hand to warm the entire palm.
・5 levels of temperature control and power consumption.*The temperature was measured at 25 degrees Celsius, no wind, and voltage 13.5V.The temperature may be lower than the measured value due to heat radiation to the handlebar, bar end, gloves, and cooling by stream.
・With a voltage suppression function, it is safe even at low voltage.
・When the voltage becomes less than 11.5V, the heating is automatically stopped, and when the voltage recovers, the heating is automatically restarted.
・Heat shrink grip protection tube" included!During the season when the grip heater is not used, this item is useful to prevent wear of the expensive grip heater.Simply cut to fit the grip length, attach to the grip, and heat shrink with a heat gun.
Lima kontrol suhu berbeda dalam sakelar kompak. Lima kontrol suhu berbeda ditunjukkan oleh lima lampu LED berwarna berbeda.
Panjang pegangan dapat disesuaikan menjadi 115/120 / 130mm dengan 3 ukuran yang berbeda dari ExtendSleeve.
Tutup ujung batang yang dapat dilepas untuk kedua jenis ujung batang dan ujung tertutup ..
GripDesign untuk penanganan yang andal dan konduktivitas termal.
Diameter Grip terkecil sekecil 33mm, jadi Anda bisa menggantinya dengan Grip normal dan tetap memiliki pegangan yang nyaman ..
Kawat Nichrome dililitkan sepenuhnya di sekeliling spek untuk menghangatkan seluruh telapak ...
Lima tingkat kontrol suhu dan konsumsi daya. * Temperatur pada 25 derajat Celcius, tidak ada angin dan 13,5 V.. Suhu mungkin lebih rendah dari nilai yang terukur karena pembuangan panas ke Handlebar, Bar End dan Sarung Tangan dan pendinginan oleh angin yang bertiup ..
Fungsi penekan tegangan memungkinkan ketenangan pikiran bahkan pada tegangan rendah.
Secara otomatis menghentikan pemanasan saat tegangan turun di bawah 11.5V dan memulai kembali secara otomatis saat tegangan pulih.
Heat Shrink GripProtective Tube disertakan!. Potong Gagang sesuai panjang, pasang pada Gagang dan panaskan menyusut dengan senapan panas ..
[Product Features]
・5-step temperature control with a compact switch.The 5-step temperature control is indicated by a 5-color LED lamp.
・The grip length can be adjusted to 115 / 120 / 130mm with 3 sizes of extended sleeves.
・The removable bar end cap is compatible with both bar end type and non-through type.
・Grip design for reliable maneuverability and thermal conductivity.
・The smallest diameter Φ33 provides a comfortable grip even if it is replaced with a regular grip.
・The nichrome wire is wound around the entire circumference of the hand to warm the entire palm.
・5 levels of temperature control and power consumption.*The temperature was measured at 25 degrees Celsius, no wind, and voltage 13.5V.The temperature may be lower than the measured value due to heat radiation to the handlebar, bar end, gloves, and cooling by stream.
・With a voltage suppression function, it is safe even at low voltage.
・When the voltage becomes less than 11.5V, the heating is automatically stopped, and when the voltage recovers, the heating is automatically restarted.
・Heat shrink grip protection tube" included!During the season when the grip heater is not used, this item is useful to prevent wear of the expensive grip heater.Simply cut to fit the grip length, attach to the grip, and heat shrink with a heat gun.
Peringatan
* Tidak dapat digunakan untuk kendaraan dengan diameter gagang kecil (kurang dari Φ22.2) , inci bar (Φ25,4) , dan kendaraan dengan kapasitas baterai dan pembangkit listrik yang rendah. (Diperlukan tegangan 12,5V untuk memulai.) * Untuk memasang selongsong pemanjang, aplikasikan perekat pada bagian yang cocok dengan pegangan di dalam selongsong pemanjang, lalu tekan dengan kuat. Selain itu, berhati-hatilah agar tidak membebani selongsong yang diperpanjang, yang dapat menyebabkan selongsong yang diperpanjang jatuh dan merusak ujung pegangan dan selongsong yang diperpanjang.
* Karena radiasi panas ke roda kemudi, ujung palang dan sarung tangan, dan pendinginan oleh angin yang bertiup, suhu yang dirasakan mungkin terasa rendah.
* Harap gunakan senapan panas untuk memasang tabung yang dapat menyusut panas untuk perlindungan pegangan. Selain itu, saat memanaskan pemanas pegangan, tabung pelindung yang terpasang dapat menjadi lunak dan kendor karena panas, jadi disarankan untuk memasangnya saat pemanas tidak digunakan.
* Jika tabung kendor setelah dipasang, panaskan kembali menyusut dengan heat gun agar dekat dengan pegangan, masih tidak melekat, keluarkan produk karena dianggap umur produk.
* Karena karakteristik tabung pelindung, panjang keseluruhan memiliki toleransi kira-kira ± 3mm. Selain itu, permukaan ujung mungkin sedikit miring, tetapi ini bukan produk yang rusak.
* Diameter dalam pegangan kanan adalah Φ25,4. Jika ada tulang rusuk pada selongsong throttle kendaraan yang akan dipasang, potong dengan ketinggian tidak lebih rendah dari diameter bagian dalam pegangan sebelum dipasang.. Jika diameter luar selongsong akselerasi lebih kecil dari diameter bagian dalam pegangan dan kendur, gunakan segel aluminium yang disediakan untuk menyesuaikan celah dengan pegangan.
* Tidak boleh digunakan untuk kendaraan SUZUKI dengan kapasitas baterai rendah dan pembangkit tenaga dan kendaraan HONDA dengan baterai kurang dari 7S.
* Kendaraan YAMAHA dapat digunakan pada kendaraan dengan baterai 4B5 atau lebih tinggi.
*Not for use with vehicles with small handlebars (Φless than 22.2), inch bars (Φ25.4), or vehicles with low battery capacity or power generation.(A voltage of 12.5V is required for start-up)
*When installing the supplied extension sleeve, apply adhesive to the inside of the extension sleeve where it meets the grip, and crimp it firmly.Please note that extreme load on the extending sleeve may lead to the falling off of the extending sleeve or the breakage of the grip end and the extending sleeve.
*Please understand in advance that you may feel lower temperature due to the heat radiation to the handlebars, bar ends and gloves, and cooling by the driving wind.
*Use a heat gun to install the heat shrink tubing for grip protection provided.Also, when the grip heater is heated, the protective tube may soften and loosen due to the heat, so it is recommended to install it when the heater is not in use.
*If the tube becomes loose after installation, heat shrink it again with a heat gun to make it tighter to the grip.If it still does not adhere, please remove the product as it may be the end of its life.
*The total length of the protective tube has a tolerance of plus or minus 3mm due to its characteristics.The edge of the product may be slightly slanted, but this is not a defect.
*The inner diameter of the right grip is Φ25.4.If the throttle sleeve of the vehicle to be installed has ribs, cut them to a height not lower than the inner diameter of the grip before installation.If the outer diameter of the throttle sleeve is smaller than the inner diameter of the grip and the throttle sleeve is loose, use the supplied aluminum seal to adjust the gap between the throttle sleeve and the grip.
*This product may not be used for SUZUKI vehicles with low battery capacity and power generation, or HONDA vehicles with batteries less than 7S.
*Yamaha vehicles with 4B5 or higher batteries can be used.
* Karena radiasi panas ke roda kemudi, ujung palang dan sarung tangan, dan pendinginan oleh angin yang bertiup, suhu yang dirasakan mungkin terasa rendah.
* Harap gunakan senapan panas untuk memasang tabung yang dapat menyusut panas untuk perlindungan pegangan. Selain itu, saat memanaskan pemanas pegangan, tabung pelindung yang terpasang dapat menjadi lunak dan kendor karena panas, jadi disarankan untuk memasangnya saat pemanas tidak digunakan.
* Jika tabung kendor setelah dipasang, panaskan kembali menyusut dengan heat gun agar dekat dengan pegangan, masih tidak melekat, keluarkan produk karena dianggap umur produk.
* Karena karakteristik tabung pelindung, panjang keseluruhan memiliki toleransi kira-kira ± 3mm. Selain itu, permukaan ujung mungkin sedikit miring, tetapi ini bukan produk yang rusak.
* Diameter dalam pegangan kanan adalah Φ25,4. Jika ada tulang rusuk pada selongsong throttle kendaraan yang akan dipasang, potong dengan ketinggian tidak lebih rendah dari diameter bagian dalam pegangan sebelum dipasang.. Jika diameter luar selongsong akselerasi lebih kecil dari diameter bagian dalam pegangan dan kendur, gunakan segel aluminium yang disediakan untuk menyesuaikan celah dengan pegangan.
* Tidak boleh digunakan untuk kendaraan SUZUKI dengan kapasitas baterai rendah dan pembangkit tenaga dan kendaraan HONDA dengan baterai kurang dari 7S.
* Kendaraan YAMAHA dapat digunakan pada kendaraan dengan baterai 4B5 atau lebih tinggi.
*Not for use with vehicles with small handlebars (Φless than 22.2), inch bars (Φ25.4), or vehicles with low battery capacity or power generation.(A voltage of 12.5V is required for start-up)
*When installing the supplied extension sleeve, apply adhesive to the inside of the extension sleeve where it meets the grip, and crimp it firmly.Please note that extreme load on the extending sleeve may lead to the falling off of the extending sleeve or the breakage of the grip end and the extending sleeve.
*Please understand in advance that you may feel lower temperature due to the heat radiation to the handlebars, bar ends and gloves, and cooling by the driving wind.
*Use a heat gun to install the heat shrink tubing for grip protection provided.Also, when the grip heater is heated, the protective tube may soften and loosen due to the heat, so it is recommended to install it when the heater is not in use.
*If the tube becomes loose after installation, heat shrink it again with a heat gun to make it tighter to the grip.If it still does not adhere, please remove the product as it may be the end of its life.
*The total length of the protective tube has a tolerance of plus or minus 3mm due to its characteristics.The edge of the product may be slightly slanted, but this is not a defect.
*The inner diameter of the right grip is Φ25.4.If the throttle sleeve of the vehicle to be installed has ribs, cut them to a height not lower than the inner diameter of the grip before installation.If the outer diameter of the throttle sleeve is smaller than the inner diameter of the grip and the throttle sleeve is loose, use the supplied aluminum seal to adjust the gap between the throttle sleeve and the grip.
*This product may not be used for SUZUKI vehicles with low battery capacity and power generation, or HONDA vehicles with batteries less than 7S.
*Yamaha vehicles with 4B5 or higher batteries can be used.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/