- Beranda
- Motor
- APRILIA 1001cc -
- TUONO V4 1100 Factory
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Saklar Stang
- CNC Racing
- CNC Racing: Saklar Stang untuk Racing (Kiri)
Saklar Stang untuk Racing (Kiri)
- Nomor produk: SWA05B
-
- IN STOCK
- Out Stock
- CNC Racing
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
RSV4 Racing Factory 17-18
RSV4 RR 18
Tuono V4 1100 Factory 17-19
Tuono V4 1100 RR 17-19
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Kerah] Hitam
[FrontButton]
Biru: Atas
Warna: Kuning: Benar
Hitam: Oke
Lampu Hijau: Kiri
Warna: Abu-abu: Lebih Rendah
[RearButton]
Merah: Kontrol traksi +
Lampu Hijau: Kontrol traksi-
Hitam: Jalur pit [Color] Black
[Front buttons]
Blue: Upper
Yellow: right
Black: OK
Green: left
Gray: under
[rear button]
Red: Traction control +
Green: Traction control -
Black: Pit lane
[FrontButton]
Biru: Atas
Warna: Kuning: Benar
Hitam: Oke
Lampu Hijau: Kiri
Warna: Abu-abu: Lebih Rendah
[RearButton]
Merah: Kontrol traksi +
Lampu Hijau: Kontrol traksi-
Hitam: Jalur pit [Color] Black
[Front buttons]
Blue: Upper
Yellow: right
Black: OK
Green: left
Gray: under
[rear button]
Red: Traction control +
Green: Traction control -
Black: Pit lane
[Deskripsi]
Tubuh saklar dibuat dari aluminium 7075 penuh (Ergal) batangan dan kemudian mengalami proses anodisasi hitam keras yang meningkatkan pemrosesan dengan mesin CNC.
Semua tombol sesuai dengan standar militer IP67 yang menyatakan sakelar itu sendiri tahan air.
Pengoperasian semua tombol dijamin oleh lebih dari 700.000 siklus.
Perakitan sangat mudah dan pasang & mainkan : cukup bongkar sakelar asli dengan alat yang direkomendasikan oleh Pabrikan dan klem master silinder; kemudian pasang sakelar CNC Racing yang menghubungkan steker ke kabel asli sepeda.
Tidak ada hal lain yang diperlukan dan Anda selalu dapat kembali ke konfigurasi asli tanpa modifikasi apa pun.
Saklar stang balap mempertahankan fungsi Joystick (5 tombol depan) dan kontrol TC / Pitlane (3 tombol belakang) ; semua fungsi lain dari sakelar asli tidak ada pada versi ini yang didedikasikan untuk trek The switch body is machined from full 7075 aluminium (Ergal) bars and has then undergone a hard black anodizing process that enhances processing with CNC machinery.
All the buttons compliant with the IP67 military standard that certifies the switch itself is water resistant.
The operation of all buttons is guaranteed by over 700.000 cycles.
Assembly is very easy and plug&play: just dismantle the original switch with the tools recommended by the Manufacturer and the master cylinder clamp; then fit the CNC Racing switch connecting the plug to the bike original cable.
Nothing else is required and you can always go back to the original configuration without any modification.
The racing handlebar switch maintains the functions of the Joystick (5 front buttons) and of the TC control/Pitlane (3 rear buttons); all the other functions of the original switch are not present on this version dedicated to the track
Semua tombol sesuai dengan standar militer IP67 yang menyatakan sakelar itu sendiri tahan air.
Pengoperasian semua tombol dijamin oleh lebih dari 700.000 siklus.
Perakitan sangat mudah dan pasang & mainkan : cukup bongkar sakelar asli dengan alat yang direkomendasikan oleh Pabrikan dan klem master silinder; kemudian pasang sakelar CNC Racing yang menghubungkan steker ke kabel asli sepeda.
Tidak ada hal lain yang diperlukan dan Anda selalu dapat kembali ke konfigurasi asli tanpa modifikasi apa pun.
Saklar stang balap mempertahankan fungsi Joystick (5 tombol depan) dan kontrol TC / Pitlane (3 tombol belakang) ; semua fungsi lain dari sakelar asli tidak ada pada versi ini yang didedikasikan untuk trek The switch body is machined from full 7075 aluminium (Ergal) bars and has then undergone a hard black anodizing process that enhances processing with CNC machinery.
All the buttons compliant with the IP67 military standard that certifies the switch itself is water resistant.
The operation of all buttons is guaranteed by over 700.000 cycles.
Assembly is very easy and plug&play: just dismantle the original switch with the tools recommended by the Manufacturer and the master cylinder clamp; then fit the CNC Racing switch connecting the plug to the bike original cable.
Nothing else is required and you can always go back to the original configuration without any modification.
The racing handlebar switch maintains the functions of the Joystick (5 front buttons) and of the TC control/Pitlane (3 rear buttons); all the other functions of the original switch are not present on this version dedicated to the track
Peringatan
* Untuk pelanggan yang telah membeli CNC Racing: CNC Racing di Webike, silakan hubungi Webike jika Anda memiliki pertanyaan tentang produk ini.
* Harap dicatat bahwa semua instruksi manual ditulis dalam bahasa Inggris dan bahasa asing lainnya.
* Ada kasus di mana logo berubah tergantung pada produk dari lot produksi pabrikan. Produk tanpa ukiran "MADE IN ITALY" dan logo CNC RACING adalah a [CNC] Desain. Harap diperhatikan (Desain, seperti situs negara asal produsen logo) tidak dapat ditentukan oleh pelanggan. Harap dicatat bahwa PEMBATALAN atau PENGEMBALIAN produk karena perubahan spesifikasi desain logo tidak dapat diterima. *If you have purchased a CNC Racing product from Webike, please contact Webike with any questions about the product.
*All instruction manuals are in English and other languages.
*Logos may change depending on the product of the manufacturer's production lot.Some products do not have "MADE IN ITALY" stamped on them, or the CNC RACING logo is only "CNC".(Designed like the logo on the manufacturer's website) You cannot specify. Please note that we do not accept cancellations or returns due to changes in logo design specifications.
* Harap dicatat bahwa semua instruksi manual ditulis dalam bahasa Inggris dan bahasa asing lainnya.
* Ada kasus di mana logo berubah tergantung pada produk dari lot produksi pabrikan. Produk tanpa ukiran "MADE IN ITALY" dan logo CNC RACING adalah a [CNC] Desain. Harap diperhatikan (Desain, seperti situs negara asal produsen logo) tidak dapat ditentukan oleh pelanggan. Harap dicatat bahwa PEMBATALAN atau PENGEMBALIAN produk karena perubahan spesifikasi desain logo tidak dapat diterima. *If you have purchased a CNC Racing product from Webike, please contact Webike with any questions about the product.
*All instruction manuals are in English and other languages.
*Logos may change depending on the product of the manufacturer's production lot.Some products do not have "MADE IN ITALY" stamped on them, or the CNC RACING logo is only "CNC".(Designed like the logo on the manufacturer's website) You cannot specify. Please note that we do not accept cancellations or returns due to changes in logo design specifications.
Model yang Sesuai
RSV4 Racing Factory 17-18
RSV4 RR 18
Tuono V4 1100 Factory 17-19
Tuono V4 1100 RR 17-19
Tampilkan lebih banyak
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/