- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- Ninja H2 SX
- Sparepart Motor
- Sparepart Stang & Kemudi
- Jalu Stang
- POSH
- POSH: Jalu Stang Solid
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Z650 17-20
NINJA650 17-20
NINJA250SL 15-16
NINJA H2-SX 18-19
NINJA H2-SX 19-20
NINJA H2-SX 18-20
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Spesifikasi] Bawaan Kawasaki tipe M6 (untuk stang bawaan)
[Bahan] Aluminium CNC
[Surface finish] anodize / Plating finish
[Berat] Sekitar 60g (per piece)
[Diameter luar maksimum] 29.5mm
[Termasuk]
Adaptor M6 untuk motor Kawasaki: 2 pcs.
Spacer 5mm: 2 pcs.
M6 x 50mm Stainless Steel Cap Bolt: 2 pcs.
Baut stainless steel M6 x 55mm: 2 pcs.
[Jumlah] Set kanan dan kiri
[Negara asal] Dibuat di Jepang
[Specification] Stock KAWASAKI M6 type (for stock handlebar)
[Material] Machined aluminum
[Surface finish] anodize / Plating finish
[Weight] Approx. 60g (per piece)
[Maximum outer diameter] 29.5mm
[Component]
・M6 adapter for KAWASAKI models: 2 pcs.
・5mm spacer: 2 pcs.
・M6 x 50mm Stainless Steel Cap Bolt: 2 pcs.
・M6 x 55mm Stainless Steel Cap Bolt: 2 pcs.
[Quantity] Left / right set
[Country of Origin] Made in Japan
[Bahan] Aluminium CNC
[Surface finish] anodize / Plating finish
[Berat] Sekitar 60g (per piece)
[Diameter luar maksimum] 29.5mm
[Termasuk]
Adaptor M6 untuk motor Kawasaki: 2 pcs.
Spacer 5mm: 2 pcs.
M6 x 50mm Stainless Steel Cap Bolt: 2 pcs.
Baut stainless steel M6 x 55mm: 2 pcs.
[Jumlah] Set kanan dan kiri
[Negara asal] Dibuat di Jepang
[Specification] Stock KAWASAKI M6 type (for stock handlebar)
[Material] Machined aluminum
[Surface finish] anodize / Plating finish
[Weight] Approx. 60g (per piece)
[Maximum outer diameter] 29.5mm
[Component]
・M6 adapter for KAWASAKI models: 2 pcs.
・5mm spacer: 2 pcs.
・M6 x 50mm Stainless Steel Cap Bolt: 2 pcs.
・M6 x 55mm Stainless Steel Cap Bolt: 2 pcs.
[Quantity] Left / right set
[Country of Origin] Made in Japan
[Deskripsi]
Desain Sederhana "Solid Bar Berakhir!
Dengan menggabungkan bagian-bagiannya, Anda dapat menggunakannya dengan gagang Kawasaki asli ..
Dua jenis baut pemasangan (M6X50,55mm) sudah termasuk.. Solid bar ends with "simple design"!
Stock KAWASAKI M6 type (for stock handlebar)
With the combination of the attached parts, it can be used with stock KAWASAKI handlebars.
Two types of mounting bolts (M6 x 50, 55mm) are included.
Dengan menggabungkan bagian-bagiannya, Anda dapat menggunakannya dengan gagang Kawasaki asli ..
Dua jenis baut pemasangan (M6X50,55mm) sudah termasuk.. Solid bar ends with "simple design"!
Stock KAWASAKI M6 type (for stock handlebar)
With the combination of the attached parts, it can be used with stock KAWASAKI handlebars.
Two types of mounting bolts (M6 x 50, 55mm) are included.
Peringatan
*Tergantung dari tipe motornya, Anda mungkin perlu washer untuk menyesuaikan grip stang.
*Baut jalu stang harap disesuaikan dengan bawaan.
*Harap diperhatikan baut bisa kurang tergantung dengan body motornya.
*Sebaiknya menggunakan lem drat agar baut tidak longgar.
*Foto mungkin memuat warna dan produk lainnya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Adjustment with washers, etc. may be necessary depending on the grip and model used.
*Adjust the bolt protrusion by comparing with the removed bar end.
*Please note that the supplied bolts may not be sufficient for some vehicle bodies.
*It is recommended to apply thread locker to prevent the product from falling off when installing.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Baut jalu stang harap disesuaikan dengan bawaan.
*Harap diperhatikan baut bisa kurang tergantung dengan body motornya.
*Sebaiknya menggunakan lem drat agar baut tidak longgar.
*Foto mungkin memuat warna dan produk lainnya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Adjustment with washers, etc. may be necessary depending on the grip and model used.
*Adjust the bolt protrusion by comparing with the removed bar end.
*Please note that the supplied bolts may not be sufficient for some vehicle bodies.
*It is recommended to apply thread locker to prevent the product from falling off when installing.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
Z650 17-20
NINJA650 17-20
NINJA250SL 15-16
NINJA H2-SX 18-19
NINJA H2-SX 19-20
NINJA H2-SX 18-20
Tampilkan lebih banyak
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/