- Beranda
- Motor
- KAWASAKI 126 - 250cc
- NINJA250 (EX250)
- Sparepart Motor
- Bodywork
- Fairing
- Tutup Aki
- A-TECH
- A-TECH: Side Cowl Spesial 2 untuk Racing
Side Cowl Spesial 2 untuk Racing
- Nomor produk: K0159790-R02-L
-
- IN STOCK
- Out Stock
- A-TECH
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Dapat digunakan dengan A-TECH Upper Cowl SPL2 dan Under Cowl SPL2.
Dapat dipasang bersama dengan OEM Seat Cowl.
Spec untuk digunakan dengan OEMSeat Cowl saat dikirim. Kami akan mengirimkan pada.
Bagian tengah penutup samping dilengkapi dengan Saluran Besar, yang secara dramatis meningkatkan efisiensi panas limbah. This product can be installed on A-TECH Upper Cowl SPL2 and Under Cowl SPL2.
It can be installed with the stock seat cowl.
Usually the stock seat will be shipped with a condition the stock cowl can be used.
A large duct is installed in the center of the side cowl, and the waste heat efficiency is dramatically improved.
Dapat dipasang bersama dengan OEM Seat Cowl.
Spec untuk digunakan dengan OEMSeat Cowl saat dikirim. Kami akan mengirimkan pada.
Bagian tengah penutup samping dilengkapi dengan Saluran Besar, yang secara dramatis meningkatkan efisiensi panas limbah. This product can be installed on A-TECH Upper Cowl SPL2 and Under Cowl SPL2.
It can be installed with the stock seat cowl.
Usually the stock seat will be shipped with a condition the stock cowl can be used.
A large duct is installed in the center of the side cowl, and the waste heat efficiency is dramatically improved.
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Untuk produk FRP (black / white), banyak produk yang dibuat menggunakan proses cetak (mold).
*Ketika produk sudah dicetak, di tahapan selanjutnya perlu diampelas untuk menghaluskan permukannya, sehingga lapisan gel dapat ikut terampelas.
*Hal ini bukan berarti produk cacat atau reject karena produk yang berjenis FRP memang belum dicat (hanya dilapisi gel untuk memperkuat bahan dasarnya.
*Kami harap Anda dapat memahaminya.
*Informasi di atas tidak untuk produk dengan tipe yang sudah dicat / dilapisi, seperti dry dan wet carbon.
*Foto menunjukkan bahan FRP Black.
*Foto mungkin memuat produk lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: FRP / Black is used.
*The image includes other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Ketika produk sudah dicetak, di tahapan selanjutnya perlu diampelas untuk menghaluskan permukannya, sehingga lapisan gel dapat ikut terampelas.
*Hal ini bukan berarti produk cacat atau reject karena produk yang berjenis FRP memang belum dicat (hanya dilapisi gel untuk memperkuat bahan dasarnya.
*Kami harap Anda dapat memahaminya.
*Informasi di atas tidak untuk produk dengan tipe yang sudah dicat / dilapisi, seperti dry dan wet carbon.
*Foto menunjukkan bahan FRP Black.
*Foto mungkin memuat produk lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: FRP / Black is used.
*The image includes other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/