- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- Z900RS
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Belakang
- A-TECH
- A-TECH: Spakbor Kolong SPL
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Ini diperpanjang sekitar 150mm lebih panjang dari OEM, dan memiliki percikan lumpur yang tidak menyenangkan, dll.. Perawatan roda gigi akan ditingkatkan ..
Bagian yang Disertakan: Tidak termasuk, tetapi dapat dipasang dengan baut OEM yang dilepas selama pemasangan .. The length of this kit is 150mm longer than stock to prevent uncomfortable mud splash and to improve the maintenance of the rear area.
There are no accessories, but it can be installed by bolt-on using the stock bolts which were removed when installing.
Bagian yang Disertakan: Tidak termasuk, tetapi dapat dipasang dengan baut OEM yang dilepas selama pemasangan .. The length of this kit is 150mm longer than stock to prevent uncomfortable mud splash and to improve the maintenance of the rear area.
There are no accessories, but it can be installed by bolt-on using the stock bolts which were removed when installing.
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Foto menunjukkan produk dalam tipe Twill Weave Dry Carbon.
*Pemesanan produk yang dibuat berdasarkan pesanan TIDAK DAPAT DIBATALKAN.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: It is made of twill weave dry carbon.
*The product is made to order and cannot be cancelled or returned after the order has been placed.
*There may be changes in product specifications due to the manufacturer's reasons.
*Pemesanan produk yang dibuat berdasarkan pesanan TIDAK DAPAT DIBATALKAN.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: It is made of twill weave dry carbon.
*The product is made to order and cannot be cancelled or returned after the order has been placed.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/