- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- Z900RS
- Sparepart Motor
- Bodywork
- Fairing
- Seat Cowl / Tail Cowl
- A-TECH
- A-TECH: Tail Cowl SPL
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Termasuk]
Bracket relokasi lampu belakang
Set baut x 1
[Spesifikasi]
Panjang: + sekitar 45mm (dibandingkan dengan OEM) [Included Parts]
Taillight Transfer Bracket
Bolts x1 Set
[Material]
Length: + Approximately 45mm (OEM Ratio)
Bracket relokasi lampu belakang
Set baut x 1
[Spesifikasi]
Panjang: + sekitar 45mm (dibandingkan dengan OEM) [Included Parts]
Taillight Transfer Bracket
Bolts x1 Set
[Material]
Length: + Approximately 45mm (OEM Ratio)
[Deskripsi]
Ini lebih panjang dari penutup ekor OEM sekitar 45mm ..
Hanya Lampu OEMTail yang didukung .. This tail cowl is about 45mm longer than stock tail cowl.
It is only compatible with stock taillights.
Hanya Lampu OEMTail yang didukung .. This tail cowl is about 45mm longer than stock tail cowl.
It is only compatible with stock taillights.
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Foto menunjukkan produk dalam tipe Twill Weave Dry Carbon.
*Pemesanan produk yang dibuat berdasarkan pesanan TIDAK DAPAT DIBATALKAN.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *There may be changes in product specifications due to the manufacturer's reasons.
*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: It is made of twill weave dry carbon.
*The product is made to order and cannot be cancelled or returned after the order has been placed.
*Pemesanan produk yang dibuat berdasarkan pesanan TIDAK DAPAT DIBATALKAN.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *There may be changes in product specifications due to the manufacturer's reasons.
*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: It is made of twill weave dry carbon.
*The product is made to order and cannot be cancelled or returned after the order has been placed.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/