- Beranda
- Motor
- HONDA 0 - 50cc
- SUPER CUB 50 (C50)
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Set Mesin
- TANAKA TRADING
- TANAKA TRADING: Mesin 124cc dengan Dinamo Starter
Mesin 124cc dengan Dinamo Starter
- Nomor produk: ca1656
-
- IN STOCK
- Out Stock
- TANAKA TRADING
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Warna body]
Silver
[Spesifikasi]
Kapasitas mesin: 124cc
Kopling manual 4 percepatan (Pola operan 1-N-2-3-4) [Body color]
Silver
[Specification]
Engine Displacement: 124cc
Manual Clutch 4-speed (Shift Pattern 1-N-2-3-4)
Silver
[Spesifikasi]
Kapasitas mesin: 124cc
Kopling manual 4 percepatan (Pola operan 1-N-2-3-4) [Body color]
Silver
[Specification]
Engine Displacement: 124cc
Manual Clutch 4-speed (Shift Pattern 1-N-2-3-4)
[Deskripsi]
Attached harnesses: For Monkey
Attached harnesses: For Monkey
Attached harnesses: For Monkey
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Manifold yang termasuk hanya untuk karburator Tanaka Trading [ca30.ca31] dan tidak bisa untuk karburator bawaan.
*Tipe netral tidak akan kembali ke posisi semula usai gir ke-4.
*Untuk karbu 12V, kabel body bawaan bisa dipakai, namun coupler sambungan mesin harus diganti dengan tipe skun.
*Untuk motor 6V, gunakan produk kabel body [ca885]
*Untuk motor 6V, aki, klep, dan komponen elektrik lainnya harus diganti ke 12V.
*Ada kasus di mana ada bagian yang harus dipotong ketika memasang ke CHALY karena akan bersentuhan dengan rangka.
*Manifold yang disertakan hanya untuk MONKEY. Beberapa motor lainnya (CHALY, Cub, etc.) mungkin membutuhkan modifikasi atau bahkan tidak sesuai sama sekali dengan produk ini.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. *The attached manifold is for the carburetor sold by Tanaka Trading [ca30, ca31].It cannot be used with stock carburetor.
*The included manifold sprocket is for Monkey.Some vehicles (CHALY, CUB, etc.) may require modification and may not fit.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle, the [ca885] 12V engine replacement harness is very convenient.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*When you install it on CHALY, you need to cut the interfering part because it interferes with the frame.
*Since the included switches cannot be used with the coupler on the Cub's harness, wiring modification is required.
*Regardless of the harness selection, the set contents are parts for Monkey.
*Tanaka Trading does not exchange products after shipment.Please check the engine model carefully before purchasing.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*As this is a set product combined with the accompanying harness, wiring modifications may be necessary.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
*Tipe netral tidak akan kembali ke posisi semula usai gir ke-4.
*Untuk karbu 12V, kabel body bawaan bisa dipakai, namun coupler sambungan mesin harus diganti dengan tipe skun.
*Untuk motor 6V, gunakan produk kabel body [ca885]
*Untuk motor 6V, aki, klep, dan komponen elektrik lainnya harus diganti ke 12V.
*Ada kasus di mana ada bagian yang harus dipotong ketika memasang ke CHALY karena akan bersentuhan dengan rangka.
*Manifold yang disertakan hanya untuk MONKEY. Beberapa motor lainnya (CHALY, Cub, etc.) mungkin membutuhkan modifikasi atau bahkan tidak sesuai sama sekali dengan produk ini.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. *The attached manifold is for the carburetor sold by Tanaka Trading [ca30, ca31].It cannot be used with stock carburetor.
*The included manifold sprocket is for Monkey.Some vehicles (CHALY, CUB, etc.) may require modification and may not fit.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle, the [ca885] 12V engine replacement harness is very convenient.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*When you install it on CHALY, you need to cut the interfering part because it interferes with the frame.
*Since the included switches cannot be used with the coupler on the Cub's harness, wiring modification is required.
*Regardless of the harness selection, the set contents are parts for Monkey.
*Tanaka Trading does not exchange products after shipment.Please check the engine model carefully before purchasing.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*As this is a set product combined with the accompanying harness, wiring modifications may be necessary.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/