- Beranda
- Motor
- KAWASAKI 251 - 400cc
- NINJA400 (2014-)
- Sparepart Motor
- Sparepart Stang & Kemudi
- Stang Jepit
- SNIPER
- SNIPER: Stang Jepit
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Warna: Black
Bahan: Aluminium
Ketebalan bracket shock depan: 28mm
Stang: Diameter luar Φ22.2mm, Panjang: 230mm
[Spek]
25mm lebih rendah dari asli
Offset 20mm lebih maju dari asli
Sudut stang bisa disetel
Bukaan stang bisa disetel Color: Black
Material: Aluminum
Fork Bracket Thickness: 28mm
Handlebar: Φ22.2mm O.D., Length: 230mm
[Specification]
25mm lower than stock
Offset 20mm forward from stock
.
Handlebar droop angle: Full adjustable
Handlebar opening angle: Full adjustable
Bahan: Aluminium
Ketebalan bracket shock depan: 28mm
Stang: Diameter luar Φ22.2mm, Panjang: 230mm
[Spek]
25mm lebih rendah dari asli
Offset 20mm lebih maju dari asli
Sudut stang bisa disetel
Bukaan stang bisa disetel Color: Black
Material: Aluminum
Fork Bracket Thickness: 28mm
Handlebar: Φ22.2mm O.D., Length: 230mm
[Specification]
25mm lower than stock
Offset 20mm forward from stock
.
Handlebar droop angle: Full adjustable
Handlebar opening angle: Full adjustable
Peringatan
Pastikan bahwa produk ini dipasang oleh orang yang memiliki kemampuan dan kualifikasi seperti mekanik.
*Stang terpasang ke bracket stang, maka pakai lem drat untuk mencegah stang longgar.
*Stang tidak memiliki lubang saklar, sehingga Anda perlu mengebornya.
*Shock depan harus dipasang dengan tonjolan 6mm.
*Cek alur selang rem dan sudut cutting.
*Alur selang rem di luar klem di atas segitiga memberikan ruang lebih besar untuk selang rem setelah pemasangan.
*Pastikan produk tidak bentrok dengan tangki atau cowl.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. [Regarding installation]
*Please be sure to ask a qualified and skilled person such as a mechanic to install the product.
*The handlebar is screwed into the handlebar bracket, so please use threadlocker before installation to prevent the handlebar from loosening.
*The handlebar does not have a hole for the switch housing, so drilling is required.
*Front forks must be installed with 6mm protrusion.
*Pay attention to the routing of the brake hose and the angle of cut.
*The brake hose is routed outside the top bridge clamp to allow more room for the brake hose after installation.
*Install with care to avoid interference with the tank and cowl.
*There may be changes in product specifications due to the manufacturer's reasons.
*Stang terpasang ke bracket stang, maka pakai lem drat untuk mencegah stang longgar.
*Stang tidak memiliki lubang saklar, sehingga Anda perlu mengebornya.
*Shock depan harus dipasang dengan tonjolan 6mm.
*Cek alur selang rem dan sudut cutting.
*Alur selang rem di luar klem di atas segitiga memberikan ruang lebih besar untuk selang rem setelah pemasangan.
*Pastikan produk tidak bentrok dengan tangki atau cowl.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. [Regarding installation]
*Please be sure to ask a qualified and skilled person such as a mechanic to install the product.
*The handlebar is screwed into the handlebar bracket, so please use threadlocker before installation to prevent the handlebar from loosening.
*The handlebar does not have a hole for the switch housing, so drilling is required.
*Front forks must be installed with 6mm protrusion.
*Pay attention to the routing of the brake hose and the angle of cut.
*The brake hose is routed outside the top bridge clamp to allow more room for the brake hose after installation.
*Install with care to avoid interference with the tank and cowl.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/