- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- Z H2
- Sparepart Motor
- Bodywork
- Spakbor
- Fender Eliminator
- G-Craft
- G-Craft: Dudukan Plat Nomor Billet
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Dudukan Plat Nomor Billet
Billet License Holder
[Deskripsi]
Gaya unik.
Pemegang Plat Billet Penuh.
Didesain dan diproduksi di GCraft untuk menjaga angka dalam keseimbangan terbaik untuk setiap model mobil.
Fender Belakang Besar dan panjang OEM dirancang untuk meningkatkan visibilitas pelat nomor dan setiap Lampu serta untuk mematuhi peraturan ..
Di sisi lain, Ukurannya terlalu besar, dan desain bodi mobil tidak bisa dimanfaatkan ..
Dudukan pelat nomor GILDdesign dioptimalkan untuk setiap bodi mobil dan [Warna] Bersih.
Kami telah menciptakan tampilan belakang yang bergaya dengan Aluminium Full billetLicense Plate Holder baru dengan konsep tidak "melepas spatbor" tetapi "membuat spatbor menarik" ..
Mudah untuk menginstal Fender Belakang dan Kit OEM ..
Sudut Angka tersebut sesuai dengan standar keselamatan Undang-Undang Kendaraan Jalan Raya.
Ini dirancang untuk pemasangan yang mudah dengan kekakuan yang cukup untuk billet aluminium ..
Tata letak Lampu Plat Nomor, Blinker, dan Plat Nomor dirancang dengan cermat untuk menjaga visibilitas dan fungsi setiap bagian ..
Pistol alumit logam dipilih sebagai pelat penghubung agar sesuai dengan bodi mobil untuk efek halus ..
Dari desain hingga desain, setiap bagian dipotong oleh GCraft.
Setiap Bagian dipotong di pabrik GCraft.
Semua proses seperti pengadaan material, pemrosesan, dan perawatan permukaan dilakukan di Jepang ..
Pelat penghubung dikerjakan dari pelat aluminium 10mm.
Pemotongan untuk memastikan kekakuan yang cukup dan bobot yang ringan.
Ini adalah desain unik yang mengejar keindahan keindahan formatif yang lahir dari fungsionalitas desain, dengan mempertimbangkan penempatan aksesori dan sudut pelat nomor .. One and only style.
Full billet license holder.
It is designed and manufactured by G-Craft in order to hold the number in the best balance for each model.
The stock large and long rear fender is designed to increase the visibility of the license plate and each light, and to comply with the regulations.
On the other hand, the size of the body becomes too large and the design of the body itself is not utilized.
GILDdesign's license holders are optimally matched to each vehicle body and also meet the regulations.
"This full billet aluminum license holder is the first of its kind and creates a stylish rear view.
Simply remove the stock rear fender and install the kit.
The structure is designed to be easy to install with sufficient rigidity, which can be realized by using billet aluminum.
In order not to spoil the visibility and function of each part, we paid attention to the arrangement of the number lights, blinkers and license plate.
The connecting plate is made of gun metallic anodized aluminum to match the body of the vehicle.
From design to design, each part is cut by G-Craft.
Each part is machined at G-Craft factory.
All processes such as material procurement, processing and surface treatment are carried out in Japan.
The connecting plate is made of 10mm aluminum plate.
It is machined to be lightweight while maintaining sufficient rigidity.
It is a one-of-a-kind design that pursues the beauty of form born from the beauty of function, taking into consideration the placement of auxiliary equipment and the angle of the license plate.
Pemegang Plat Billet Penuh.
Didesain dan diproduksi di GCraft untuk menjaga angka dalam keseimbangan terbaik untuk setiap model mobil.
Fender Belakang Besar dan panjang OEM dirancang untuk meningkatkan visibilitas pelat nomor dan setiap Lampu serta untuk mematuhi peraturan ..
Di sisi lain, Ukurannya terlalu besar, dan desain bodi mobil tidak bisa dimanfaatkan ..
Dudukan pelat nomor GILDdesign dioptimalkan untuk setiap bodi mobil dan [Warna] Bersih.
Kami telah menciptakan tampilan belakang yang bergaya dengan Aluminium Full billetLicense Plate Holder baru dengan konsep tidak "melepas spatbor" tetapi "membuat spatbor menarik" ..
Mudah untuk menginstal Fender Belakang dan Kit OEM ..
Sudut Angka tersebut sesuai dengan standar keselamatan Undang-Undang Kendaraan Jalan Raya.
Ini dirancang untuk pemasangan yang mudah dengan kekakuan yang cukup untuk billet aluminium ..
Tata letak Lampu Plat Nomor, Blinker, dan Plat Nomor dirancang dengan cermat untuk menjaga visibilitas dan fungsi setiap bagian ..
Pistol alumit logam dipilih sebagai pelat penghubung agar sesuai dengan bodi mobil untuk efek halus ..
Dari desain hingga desain, setiap bagian dipotong oleh GCraft.
Setiap Bagian dipotong di pabrik GCraft.
Semua proses seperti pengadaan material, pemrosesan, dan perawatan permukaan dilakukan di Jepang ..
Pelat penghubung dikerjakan dari pelat aluminium 10mm.
Pemotongan untuk memastikan kekakuan yang cukup dan bobot yang ringan.
Ini adalah desain unik yang mengejar keindahan keindahan formatif yang lahir dari fungsionalitas desain, dengan mempertimbangkan penempatan aksesori dan sudut pelat nomor .. One and only style.
Full billet license holder.
It is designed and manufactured by G-Craft in order to hold the number in the best balance for each model.
The stock large and long rear fender is designed to increase the visibility of the license plate and each light, and to comply with the regulations.
On the other hand, the size of the body becomes too large and the design of the body itself is not utilized.
GILDdesign's license holders are optimally matched to each vehicle body and also meet the regulations.
"This full billet aluminum license holder is the first of its kind and creates a stylish rear view.
Simply remove the stock rear fender and install the kit.
The structure is designed to be easy to install with sufficient rigidity, which can be realized by using billet aluminum.
In order not to spoil the visibility and function of each part, we paid attention to the arrangement of the number lights, blinkers and license plate.
The connecting plate is made of gun metallic anodized aluminum to match the body of the vehicle.
From design to design, each part is cut by G-Craft.
Each part is machined at G-Craft factory.
All processes such as material procurement, processing and surface treatment are carried out in Japan.
The connecting plate is made of 10mm aluminum plate.
It is machined to be lightweight while maintaining sufficient rigidity.
It is a one-of-a-kind design that pursues the beauty of form born from the beauty of function, taking into consideration the placement of auxiliary equipment and the angle of the license plate.
Peringatan
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/