- Beranda
- Motor
- SUZUKI 401 - 750cc
- SV650
- Sparepart Motor
- Rangka
- Chain Guide
- A-TECH
- A-TECH: Pelindung rantai drive
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Kompatibel dengan OEM Swing Arm.
Dapat dipasang bersamaan dengan A-TECH Lear Fender SPL dan Roller Type Stand Hook Slider.
Mencegah pakaian dan bagian tubuh tersangkut di Rantai / Sproket jika terjadi kecelakaan lain.
Ini wajib dipakai saat balapan. It is compatible with stock swingarm.
This product can be installed together with A-TECH rear fender SPL and roller type stand hook slider.
Prevents clothing or body parts from being caught in the chain / sprockets in the event of an accidental fall or other incident.
It is compulsory to wear it in races.
Dapat dipasang bersamaan dengan A-TECH Lear Fender SPL dan Roller Type Stand Hook Slider.
Mencegah pakaian dan bagian tubuh tersangkut di Rantai / Sproket jika terjadi kecelakaan lain.
Ini wajib dipakai saat balapan. It is compatible with stock swingarm.
This product can be installed together with A-TECH rear fender SPL and roller type stand hook slider.
Prevents clothing or body parts from being caught in the chain / sprockets in the event of an accidental fall or other incident.
It is compulsory to wear it in races.
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Tentang FRP (Putih hitam) Produk
Mayoritas produk dipecah menjadi cetakan produksi terpisah (cetakan yang diperlukan untuk menghasilkan produk) , dan gerinda plastik dihasilkan di sepanjang garis pemisahan cetakan produksi karena proses pembuatan.
Dalam beberapa kasus, ketika produk menjalani pemrosesan sekunder, gerinda plastik harus dipotong, dan karena pemrosesan ini, lapisan gel di area pemrosesan juga terpotong pada saat yang bersamaan.
Tanda seperti ini pada produk FRP kami tidak menimbulkan masalah dan bukan merupakan produk cacat karena kami mengembangkan dan menjualnya dengan asumsi akan dicat.
Terima kasih atas pertimbangan Anda.
* Hal di atas tidak berlaku untuk produk FRP yang dicat (PT) , produk karbon basah dan kering.
* Ini harus dikencangkan kembali secara berkala sebelum dan sesudah dijalankan.
* Merupakan karakteristik FRP / produk karbon bahwa posisi lubang baut dapat bergeser karena penyusutan. Ini harus dipasang setelah memperbaiki posisi lubang dengan file atau cara lain dalam kasus ini.
* Dapat menyebabkan kerusakan atau distorsi jika baut terlalu kencang.
* Ini harus dikencangkan utama setelah semua baut, pengencangan tentatif.
* Gambar termasuk tipe lainnya.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah tanpa pemberitahuan sebelumnya pada alasan pabrikan.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*Retighten the bolts periodically before and after running.
*Due to the characteristics of FRP and carbon products, the bolt hole positions may shift due to shrinkage.In this case, correct the position of the hole with a file or the like before installation.
*Tightening the bolts too tightly may result in damage or distortion.
*Tighten all the bolts temporarily and then tighten them completely.
*The image includes other types.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Mayoritas produk dipecah menjadi cetakan produksi terpisah (cetakan yang diperlukan untuk menghasilkan produk) , dan gerinda plastik dihasilkan di sepanjang garis pemisahan cetakan produksi karena proses pembuatan.
Dalam beberapa kasus, ketika produk menjalani pemrosesan sekunder, gerinda plastik harus dipotong, dan karena pemrosesan ini, lapisan gel di area pemrosesan juga terpotong pada saat yang bersamaan.
Tanda seperti ini pada produk FRP kami tidak menimbulkan masalah dan bukan merupakan produk cacat karena kami mengembangkan dan menjualnya dengan asumsi akan dicat.
Terima kasih atas pertimbangan Anda.
* Hal di atas tidak berlaku untuk produk FRP yang dicat (PT) , produk karbon basah dan kering.
* Ini harus dikencangkan kembali secara berkala sebelum dan sesudah dijalankan.
* Merupakan karakteristik FRP / produk karbon bahwa posisi lubang baut dapat bergeser karena penyusutan. Ini harus dipasang setelah memperbaiki posisi lubang dengan file atau cara lain dalam kasus ini.
* Dapat menyebabkan kerusakan atau distorsi jika baut terlalu kencang.
* Ini harus dikencangkan utama setelah semua baut, pengencangan tentatif.
* Gambar termasuk tipe lainnya.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah tanpa pemberitahuan sebelumnya pada alasan pabrikan.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*Retighten the bolts periodically before and after running.
*Due to the characteristics of FRP and carbon products, the bolt hole positions may shift due to shrinkage.In this case, correct the position of the hole with a file or the like before installation.
*Tightening the bolts too tightly may result in damage or distortion.
*Tighten all the bolts temporarily and then tighten them completely.
*The image includes other types.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/