- Beranda
- Motor
- KAWASAKI 1001cc -
- Ninja ZX-14R (ZZR1400)
- Sparepart Motor
- Rangka
- Jalu Paddock
- BEET
- BEET: V-Racing Stand Hook
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan] Badan Bracket : Duralumin
[pengobatan permukaan] Warna Anodized
[Material] Bracket body: Duralumin made
[Surface treatment] Color alumite
[pengobatan permukaan] Warna Anodized
[Material] Bracket body: Duralumin made
[Surface treatment] Color alumite
[Deskripsi]
Ini adalah stand hook balap dengan spesifikasi yang sama dengan pembalap yang tahan lama dan tidak akan merusak bos pemasangan atau lengan ayun meskipun sewaktu-waktu terjatuh.
Ini dapat dipasang pada bos penyangga lengan ayun normal dengan baut terpasang, dan dapat dipasang jika ukuran baut pemasangan 10 mm. Dimungkinkan untuk memilih dari 4 warna, hitam, perak, emas dan hijau.
Di BEET, kami mengonfirmasi penggunaan penerima pelat V yang tahan lama (JT - R 107 W) untuk setiap stand belakang yang dibuat oleh J Trip. The racing stand hooks are made to the same specifications as those used on endurance racers, and will not damage the mounting boss or swingarm in the event of a fall.
It can be installed on the stand boss of stock swingarm by bolt-on, as long as the bolt size is 10mm.
Compatible model: ZX-14R, Z1000(07-09), NINJA1000, Z1000(10-), NINJA400, ZX-6R (09-11), KAWASAKI models with M10 hole
Ini dapat dipasang pada bos penyangga lengan ayun normal dengan baut terpasang, dan dapat dipasang jika ukuran baut pemasangan 10 mm. Dimungkinkan untuk memilih dari 4 warna, hitam, perak, emas dan hijau.
Di BEET, kami mengonfirmasi penggunaan penerima pelat V yang tahan lama (JT - R 107 W) untuk setiap stand belakang yang dibuat oleh J Trip. The racing stand hooks are made to the same specifications as those used on endurance racers, and will not damage the mounting boss or swingarm in the event of a fall.
It can be installed on the stand boss of stock swingarm by bolt-on, as long as the bolt size is 10mm.
Compatible model: ZX-14R, Z1000(07-09), NINJA1000, Z1000(10-), NINJA400, ZX-6R (09-11), KAWASAKI models with M10 hole
Catatan
Klik di sini untuk Warna lainnya
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Dapat berubah warna karena radiasi ultraviolet.
*The color may fade due to ultraviolet rays.
*BEET has used J-TRIP V-plate holder (JT-R107W) on each rear stand to check the performance.
*The image may show other types and coloring.
*There may be changes in product specifications due to the manufacturer's reasons.
*The color may fade due to ultraviolet rays.
*BEET has used J-TRIP V-plate holder (JT-R107W) on each rear stand to check the performance.
*The image may show other types and coloring.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/