- Beranda
- Motor
- KAWASAKI 126 - 250cc
- ZX-25R
- Sparepart Motor
- Rem
- Baut / Baut Mounting Kaliper
- KOOD
- KOOD: Baut Kaliper Depan
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
ZX-25R 20-21
ZX-25R SE 20-21
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan:Chromoly
Material:Chromoly
Material:Chromoly
[Deskripsi]
Dari pemilihan bahan ke proses produksi, KOOD memegang teguh prinsip "Made in Japan" untuk menjaga kualitas dan performa part custom lewat produksi berstandar tinggi.
From material selection to manufacturing, KOOD sticks to the "Made in Japan" philosophy and aim for high quality and high performance custom parts through an uncompromising manufacturing process.
From material selection to manufacturing, KOOD sticks to the "Made in Japan" philosophy and aim for high quality and high performance custom parts through an uncompromising manufacturing process.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*There may be changes in product specifications due to the manufacturer's reasons.
[About the installation]
*The shaft is a critical component.Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
*Main causes of rusting
・"Transferred rust": External rust rides on the plated surface
・Damage to the plating film: Improper use of tools, stepping stones while driving, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.
*There may be changes in product specifications due to the manufacturer's reasons.
[About the installation]
*The shaft is a critical component.Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
*Main causes of rusting
・"Transferred rust": External rust rides on the plated surface
・Damage to the plating film: Improper use of tools, stepping stones while driving, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.
Model yang Sesuai
ZX-25R 20-21
ZX-25R SE 20-21
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/