- Beranda
- Sparepart Motor
- Bodywork
- Fairing
- Fairing Atas
- GULL CRAFT
- GULL CRAFT: CR Cowl
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Lebar] Sekitar 460mm
[tinggi] Sekitar 470mm (termasuk layar)
[Panjangnya] Sekitar 655mm (Termasuk Penutup Cahaya)
[Daftar Produk]
• Tubuh Kerudung
•Layar
• Penutup Cahaya
• Sekrup Layar
• Sekrup Penutup Ringan Type: gel coat
[Width] Approx. 460mm
[Height] Approx. 470mm (including windshield)
[Length] approx. 655mm (including light cover)
[Kit Contents]
・Main unit of cowl
・Windshield
・Light cover
・Windshield screw
・Light cover screws
[tinggi] Sekitar 470mm (termasuk layar)
[Panjangnya] Sekitar 655mm (Termasuk Penutup Cahaya)
[Daftar Produk]
• Tubuh Kerudung
•Layar
• Penutup Cahaya
• Sekrup Layar
• Sekrup Penutup Ringan Type: gel coat
[Width] Approx. 460mm
[Height] Approx. 470mm (including windshield)
[Length] approx. 655mm (including light cover)
[Kit Contents]
・Main unit of cowl
・Windshield
・Light cover
・Windshield screw
・Light cover screws
[Deskripsi]
Penutup depan baru akan dijual !.
Desainnya memiliki ukuran yang cocok untuk NAKED besar atau BMW FlatTWIN ..
Karena lebar bagian Under Cowl paling lebar sekitar 460mm, maka dapat dipasang pada sepeda motor Besar ..
(Lebar kepala silinder CB1100 saat ini sekitar 400mm.)
Garpu depan terbalik dapat dipasang tanpa modifikasi jika ukuran inti ban dalam hingga 205mm ..
Desain Cowl di sekeliling Handlebar juga memudahkan untuk menghasilkan posisi pegangan favorit Anda ..
Diameter cahaya kompatibel dengan 180mm.
Dalam produksi, sistem CAD digunakan untuk membuat millet, BMW RnineT, R100RS, YamahaXSR900, XJR1300 KawasakiZ900RS, ZEPHYR1100, Moto GUZZ V7, HondaCB1100, CB750, SEA BASSGSF1200, Inazuma, DUCTI900SS, MONSTER S2, Sepeda motor di area ini baik-baik saja! . This is a new front cowl for sale.
The design is large enough to fit a large air-cooled four-engine naked vehicle or a BMW flat twin.
The maximum width of the under part of the cowl is about 460mm, so it can be installed on most of the big bikes.
(The cylinder head width of the current CB1100 is about 400mm)
The design of the front end is such that it can accommodate upside down forks, and depending on the mounting position, upside down forks with inner tube core dimensions of up to 205mm can be mounted without modification.
The design of the cowl around the handlebars also makes it easy to find the handlebar position you like.
The diameter of the light is 180mm.
Simulating the installation by CAD, BMW RnineT, R100RS, YAMAHA XSR900, XJR1300, KAWASAKI Z900RS, Zephyr1100, MOTO GUZZI V7, HONDA CB1100, CB750, SUZUKI GSF1200, INAZUMA, DUCTI900SS, MONSTER, are just right.
Desainnya memiliki ukuran yang cocok untuk NAKED besar atau BMW FlatTWIN ..
Karena lebar bagian Under Cowl paling lebar sekitar 460mm, maka dapat dipasang pada sepeda motor Besar ..
(Lebar kepala silinder CB1100 saat ini sekitar 400mm.)
Garpu depan terbalik dapat dipasang tanpa modifikasi jika ukuran inti ban dalam hingga 205mm ..
Desain Cowl di sekeliling Handlebar juga memudahkan untuk menghasilkan posisi pegangan favorit Anda ..
Diameter cahaya kompatibel dengan 180mm.
Dalam produksi, sistem CAD digunakan untuk membuat millet, BMW RnineT, R100RS, YamahaXSR900, XJR1300 KawasakiZ900RS, ZEPHYR1100, Moto GUZZ V7, HondaCB1100, CB750, SEA BASSGSF1200, Inazuma, DUCTI900SS, MONSTER S2, Sepeda motor di area ini baik-baik saja! . This is a new front cowl for sale.
The design is large enough to fit a large air-cooled four-engine naked vehicle or a BMW flat twin.
The maximum width of the under part of the cowl is about 460mm, so it can be installed on most of the big bikes.
(The cylinder head width of the current CB1100 is about 400mm)
The design of the front end is such that it can accommodate upside down forks, and depending on the mounting position, upside down forks with inner tube core dimensions of up to 205mm can be mounted without modification.
The design of the cowl around the handlebars also makes it easy to find the handlebar position you like.
The diameter of the light is 180mm.
Simulating the installation by CAD, BMW RnineT, R100RS, YAMAHA XSR900, XJR1300, KAWASAKI Z900RS, Zephyr1100, MOTO GUZZI V7, HONDA CB1100, CB750, SUZUKI GSF1200, INAZUMA, DUCTI900SS, MONSTER, are just right.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah tanpa pemberitahuan sebelumnya karena alasan produsen.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/