- Beranda
- Sparepart Motor
- Bodywork
- Fairing
- Fairing Atas
- GOODS
- GOODS: Kit Kerudung Gaya FXRT dengan Unit Cahaya
Kit Kerudung Gaya FXRT dengan Unit Cahaya
- Nomor produk: G6-00211
-
- IN STOCK
- Out Stock
- GOODS
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
dengan Light Unit
[Ukuran]
Lebar : Sekitar 760mm
Kira-kira Panjang : Sekitar 500mm
Tinggi : Sekitar 520mm
[Bahan]
FRP
Isi Produk
Badan Kerudung, Set Braket, Layar, Set Sekrup Layar With light unit
[Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
Components
Cowl body, bracket set, windshield, windshield screw set
[Ukuran]
Lebar : Sekitar 760mm
Kira-kira Panjang : Sekitar 500mm
Tinggi : Sekitar 520mm
[Bahan]
FRP
Isi Produk
Badan Kerudung, Set Braket, Layar, Set Sekrup Layar With light unit
[Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
Components
Cowl body, bracket set, windshield, windshield screw set
[Deskripsi]
Kit Fairing FXRTStyle.
Kit Fairing FXRTStyle. Dengan unit Cahaya.
Termasuk braket pemasangan untuk FXBBStreet Bob (18-20 tahun). FXRT style fairing kit.
FXRT style fairing kit.With light unit.
Includes mounting brackets compatible with FXBB STREET BOB ('18-'20).
Kit Fairing FXRTStyle. Dengan unit Cahaya.
Termasuk braket pemasangan untuk FXBBStreet Bob (18-20 tahun). FXRT style fairing kit.
FXRT style fairing kit.With light unit.
Includes mounting brackets compatible with FXBB STREET BOB ('18-'20).
Peringatan
* Kerudung ini adalah produk tujuan umum yang dibuat di luar negeri, jadi mungkin ada goresan, goresan, dan gesekan, dll.. yang dapat menyebabkan lubang tidak pas, dan mungkin perlu dimodifikasi untuk pemasangan. Harap pastikan untuk memahami hal-hal berikut sebelum membeli.
* Unit lampu dan penutup mesin dapat saling mengganggu, dalam hal ini bagian penutup yang mengganggu harus dilepas.
* Garpu dan penutup mesin dapat saling mengganggu, jadi Anda perlu memeriksa rentang gerakan sisi kiri dan kanan serta mencukur penutup mesin jika ada gangguan.
* Bagian lain yang mengganggu perlu dipotong, dicukur, atau diproses.
* Unit lampu yang terpasang harus dibuat dengan harness ekstensi dari harness utama.
* Lubang antara penahan dan penutup mesin dapat bergeser tergantung pada posisi penutup mesin. Dalam hal ini, Anda perlu memperlebar lubang pada penutup mesin.
* Ada kasus di mana layar dan lubang penutup tidak cocok, dalam hal ini, Anda perlu memperbaiki layar dan lubang penutup dari lubang tengah penutup ke luar dengan mur sumur, dan kemudian melebarkan bagian yang tidak cocok dengan file.
* Beberapa lot tidak memiliki lubang di sisi penutupnya untuk layar. Dalam hal ini, bor lubang agar sesuai dengan layar.
* Metode pemrosesan selain yang tercantum di sini tidak tersedia, jadi harap periksa dengan kendaraan yang sebenarnya.
* Produk sedang diproses, jadi kami tidak dapat menerima pengembalian karena ketidakmampuan untuk menginstalnya.
* Pastikan untuk memproses dan memasang produk sebelum mengecat. Tidak ada klaim yang akan diterima setelah pengecatan.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Please make sure to read the notes before purchasing.
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*The supplied light unit requires an extension harness to be fabricated from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.
* Unit lampu dan penutup mesin dapat saling mengganggu, dalam hal ini bagian penutup yang mengganggu harus dilepas.
* Garpu dan penutup mesin dapat saling mengganggu, jadi Anda perlu memeriksa rentang gerakan sisi kiri dan kanan serta mencukur penutup mesin jika ada gangguan.
* Bagian lain yang mengganggu perlu dipotong, dicukur, atau diproses.
* Unit lampu yang terpasang harus dibuat dengan harness ekstensi dari harness utama.
* Lubang antara penahan dan penutup mesin dapat bergeser tergantung pada posisi penutup mesin. Dalam hal ini, Anda perlu memperlebar lubang pada penutup mesin.
* Ada kasus di mana layar dan lubang penutup tidak cocok, dalam hal ini, Anda perlu memperbaiki layar dan lubang penutup dari lubang tengah penutup ke luar dengan mur sumur, dan kemudian melebarkan bagian yang tidak cocok dengan file.
* Beberapa lot tidak memiliki lubang di sisi penutupnya untuk layar. Dalam hal ini, bor lubang agar sesuai dengan layar.
* Metode pemrosesan selain yang tercantum di sini tidak tersedia, jadi harap periksa dengan kendaraan yang sebenarnya.
* Produk sedang diproses, jadi kami tidak dapat menerima pengembalian karena ketidakmampuan untuk menginstalnya.
* Pastikan untuk memproses dan memasang produk sebelum mengecat. Tidak ada klaim yang akan diterima setelah pengecatan.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Please make sure to read the notes before purchasing.
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*The supplied light unit requires an extension harness to be fabricated from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/